Gebruiksaanwijzing /service van het product SD2020 van de fabrikant Planar
Ga naar pagina of 20
SD2020 Stereoscopic Monitor USER’S GUIDE www.planar.com.
SD2020W | ii | User's Guide Usage Notice To prevent the risk of fire or shock hazards, do not exp ose this product to rain or moisture. Do not open or disassemble the product, as this may cause electric shock.
SD2020W | iii | User's Guide Box Contents The SD2020 shipping box contains the following components. Bottom monito r assembly wit h mirror support ar ms and mirr or adjustment sc rews Bottom ca b.
SD2020W | iv | User's Guide Mirror-flip PCI card Short DVI cables (14-in) Two AC adapters Product user’s guide Planar CD-ROM Captain-style glasses (2 ea) Spring clip-style glasses (1 e a) Termi.
SD2020W | v | User's Guide Contents Usage Notice .................................................................................................... ii Do ..........................................................................................
SD2020 | 1 | User's Guide Stereoscopic Viewing We live in a three-dimensional world. The human visual system can process the slightly different views of the wo rld and translate the views into the perception of depth. This pr ocess is called stereopsis.
SD2020 | 2 | User's Guide StereoMirror™ Technology A StereoMirror ™ monitor consists of two A MLCD (Active Matrix Liquid Crystal Display) units, oriented at a 110º an gle and mounted on a specially designed stand.
SD2020 | 3 | User's Guide A block diagram describing the process of driving a StereoMirro r ™ monitor with a computer is shown in the illustra tion below.
SD2020 | 4 | User's Guide Getting Started Read all instructions before assembling the monitor. Improper assem bly can result in damage to the display components. Assemble the unit 1. Remove the bottom monitor assembly from the shipping box and place it on a sturdy table or desktop.
SD2020 | 5 | User's Guide 4. Thread the cables from the top monitor through the rectangular hole in the cross bracket. 5. Replace the top and bottom cable covers, if desired.
SD2020 | 6 | User's Guide Select a graphics card The SD2020 unit requires a dual-output graphics card to drive the two monitors with a DVI signal. For profe ssional applications that use OpenGL quad-buffered stereo, the gr aphics card should support OpenGL stereo as well.
SD2020 | 7 | User's Guide Connect the cables The SD2020 unit comes with one 6- foot DVI cable, one 12-foot DVI cable, and one 14-inch DVI cable. 1. Plug one end of the 6-foot DVI cable into the primary port of the dual-channel DVI graphics card. Plug the other end into the bottom monitor of the SD2020 unit.
SD2020 | 8 | User's Guide Connect the power cords Two power cords and two AC adapters sh ipped with the stereo monitor unit. Use only the power cords and adap ters supplied with the unit. 1. Plug an AC adapter into the DC po wer jack on one monitor.
SD2020 | 9 | User's Guide Product Use Operating in 2D mode Your SD2020 unit c an operate either as a 3D stereoscopic monitor or in the standard 2D mode. There are two options to convert to 2D: • Simply turn off the power to one monitor. • Lift the mirror and slide it into the locked, upright position.
SD2020 | 10 | User's Guide Monitor Specifications Displays Size 20.1” diagonal (510 mm) Display type Active ma trix color TFT LCD panel Resolution 1600 x 1200 (UXGA) Display dot 1600 x (RGB) x 1200 Display area (mm) 408 x 306 (H x V) Pixel pitch 0.
SD2020 | 11 | User's Guide Power management This LCD monitor complies with th e VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provid es four power-saving modes through detection of a horiz ontal or vertical sync signal.
SD2020 | 12 | User's Guide System Care Monitors. Turn off the monitors before cl ea ning. Use a dry, soft cloth, clean room wiper, or compressed a ir when cleaning the LCD panel surface. A soft cloth moistened with water and/or mild detergent can be used to clean the display housing and stand.
SD2020 | 13 | User's Guide CRT Recycling If your new Planar monitor is replacin g a CRT, keep the following in mind : • If the CRT is in good working condition, con sider donating it to a school or non-profit organization. It may quali fy as a charitable tax deduction.
SD2020 | 14 | User's Guide Warning Signals Green power indicator light. Monito r has a signal and is working properly. Amber power indicator light. Monitor is in power-saving mode. LED power indicator is out. Monito r power is off. “Out of Range” message.
Customer Service Online Support: http://planar.custhelp.com E-mail: desktopmonitors@planar.c om Telephone: 1-866-PLANAR-1 (1-866-7 52-6271) Hours: Monday to Friday, 8 A . M . to 9 P . M . Eastern Time 020-0455-00A © 2006 Planar Systems, Inc. Planar is a regi stered trademark of Planar Systems, Inc.
Een belangrijk punt na aankoop van elk apparaat Planar SD2020 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Planar SD2020 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Planar SD2020 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Planar SD2020 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Planar SD2020 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Planar SD2020 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Planar SD2020 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Planar SD2020 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
