Gebruiksaanwijzing /service van het product VDR-300NU van de fabrikant Planet
Ga naar pagina of 133
User Manual of VDR-300 NU 1.
Copyright Copyright 2014 by PLANET Technology Corp. All rights re serve d. No part of this publication may be reproduced, transmitted, transcribed, st ored in a retrieval system, or translate d in.
3 This device complie s with Part 15 of the FCC Rules. Operation is subject to the Following two con ditions: (1) This device may not cause harmful interfere nce (2) This Device must accep t any interference received, includin g interference that may cause undesired operation.
Russian Federation None Only for indoor applications WEEE regulation To avoid the potential effects on the environm ent and human health as a result of the pre sence of hazardous substances in electri.
User Manual of VDR-300 NU 5 Table of Contents CHAPTER 1.PRODUCT INTRODUCTION ......................................................................... 8 1.1 Package Contents .............................................................................
6 5.2.5 NAT ............................................................................................................................... ........... 63 5.2.6 Security .................................................................................
7 5.5.5 Internet Time .......................................................................................................................... 121 5.5.6 Access Control .................................................................................
User Manual of VDR-300 NU Chapter 1.Product Introduction 1.1 Package Contents Thank you for choosing PLANET VDR-300NU. Before installing the router, please verify the contents inside the package box.
User Manual of VDR-300NU 1.2 Product Description High Performance Ethernet over VDSL PLANET 802.11n Dual Band Wireless VDSL2 R ou ter, VDR-300NU, applies 2T2R MIMO antenna technology and provides office and residential users with the ideal solution for sharing a high-speed VDSL2 broadband connection and four-10/100Mbps Fast Ethernet back bo ne.
User Manual of VDR-300NU Secure Wireless Access Control To secure wireless co mmunication, the VDR-300NU su pport s most up-to-date encryptions including WEP, WPA-PSK and WPA2-PSK. Mo reover, the VDR-300NU su pports WPS configuration with P BC/PIN type for users to easily connect to a secure d wireless network.
User Manual of VDR-300NU Providing Superior Function The VDR-300NU provides user-friendl y management interface to be manage d easily through standard web browsers.
User Manual of VDR-300NU 1.3 Product Features Internet Access Features Shared Internet Access: All users on the LAN can access t he Internet thro ugh the VDR-300NU using only one single external IP addres s. The local (invalid) IP addresses are hi dden from external sour ces.
User Manual of VDR-300NU Wireless MAC Access Co ntrol: The Wir eless Access Contro l feature can check the MAC address (hardware addres s) of wireless station s to ensure that only trusted wireless stations can access you r LAN. Dual-SSID: It allows users to access different networks through a single AP.
User Manual of VDR-300NU 1.4 Product Specifications Model VDR-300NU Product Description 802.11n Dual Band Wirele ss VDSL2 Router Hardware Specifications LAN 4 x 10/100Base-TX, Auto-Negotiation, Auto MDI/MDI-X RJ45 port WAN 1 x RJ-11 Interfaces USB USB 2.
User Manual of VDR-300NU Protocol Features RFC2684 multiprotocol Encapsulation over A TM Adaptation Laye r 5 RFC1483 multiprotocol Encapsulation over A TM Adaptation Laye r 5 RFC2364 PPP o.
User Manual of VDR-300NU Managemen t Device Configuration, Management and Update Web based GUI Localization support Embedded web server Download image via HTTP , TFTP client, TFTP .
User Manual of VDR-300NU Environment Specifications Temperature / Humidity Operating: 0~40 degrees C, 10%~ 95% (non-condensing), Storage: -20~70 degrees C, 5~95% (non -condensing) Certification CE 17.
User Manual of VDR-300NU Chapter 2. Hardware Installation This chapter offers informa tion about installing your router. If you are not familiar with the hardware or software parameters prese nted here, please consul t your service provider for the values neede d.
User Manual of VDR-300NU Figure 2-2 VDR-300NU LED Front Panel LED Definition LED Color State Description ON When the router is powere d on, and in ready state. Flashing The software is upgradi ng. Green OFF The device is powered off. ON The device is initiating.
User Manual of VDR-300NU 2.1.3 Rear Panel and Side Panel The rear panel provides th e physical connectors c onnected to the power ad apter and any other network device.
User Manual of VDR-300NU 2.1.4 Right Side Panel Figure 2-4 VDR-300NU Side Panel Side Panel Interface and Button Definition Connector Description On/Off Power switch. USB1 For connecting the 3G net work adapter or other USB stora ge devices. WL AN WLAN switch, for enabling or disabling the WLAN function.
User Manual of VDR-300NU Chapter 3. Connecting to the Router 3.1 System Requirements Broadband Internet Access Servic e (Cable/xDSL/Ethernet connection) One Cable/x DSL Modem that has an RJ-45 connect or (not necessary if t he Ro uter is connected directly to the Ethernet.
User Manual of VDR-300NU STEP 2. Connect the Power Adapter to the VDR-300NU. Check whether the PWR LED on the front panel are on accordingly. Figure3-1 sho ws the power adapter connection diagram. Figure 3-1: VDR-300NU Po w er Adapter Connection Diagram STEP 3.
User Manual of VDR-300NU If you use 3G W AN service, connect the 3G USB data card to the USB port of the router . 24.
User Manual of VDR-300NU Chapter 4. Installation Guide 4.1 Configuring PC in Windows 7 1. Go to Start / Control Panel / Net w ork and Internet / Net w ork and Sharing Center and click Change adapter settin gs on the left banner. 2. Double-click Local Area Connection .
User Manual of VDR-300NU 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically button. 6. Click OK to finish the configuration.
User Manual of VDR-300NU 4.2 Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View) . In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connec tion . 3. In the Local Area Connection Status window, click Properties .
User Manual of VDR-300NU 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically button. 6. Click OK to finish the configuration.
User Manual of VDR-300NU Chapter 5. System Settings Determine your Connection Settings Before you configure the router, y ou need to know the connection informatio n supplied by your Internet service provider.
User Manual of VDR-300NU 5.1 Device Information Choose Dev ice Info , and the submenus of Devi ce Info are shown below: Figure 5-1-1 5.1.1 Summary Choose Dev ice Info > Summary , and the following page appea rs.
User Manual of VDR-300NU 5.1.2 WAN Choose Dev ice Info > WAN and the following page a ppears. Figure 5-1-3 This page displays the information of t he WAN interface. You can select from Adv anced Setup > Layer2 Interface to choose the type you need.
User Manual of VDR-300NU Figure 5-1-5 On this page, you can view the statistical informat ion about the recei ved and transmitted data packets of the WAN interface. Click Reset Statistics to restore th e values to zero and recount them. xTM Choose Device Info > Statistics > xTM and the following page appears.
.
User Manual of VDR-300NU Figure 5-1-9 When the xDSL BER Test completes, the followi ng page appears. Figure 5-1-10 If the BER reaches e-5, you cannot access the Internet. 5.1.4 Route Choose Device Info > Route a nd the following page appears. On this page, you can view the ro ute table information.
User Manual of VDR-300NU 5.1.5 ARP Choose Dev ice Info > ARP and the following page appea rs. Figure 5-1-12 On this page, you can view the MAC address and IP addres s information of the device connected to the router. 5.1.6 DHCP Choose Dev ice Info > DHCP and the following page appears.
User Manual of VDR-300NU 5.2 Advanced Setup Choose Advanced Se tup and the submenus of Ad vanced Setup are shown below: Figure 5-2-1 5.2.1 Layer2 Interface Choose Advanced Se tup > Layer2 Interface and the following pa ge appears. ATM Interface Choose Advanced Setup > Layer2 Interface > ATM Interface .
User Manual of VDR-300NU Figure 5-2-3 On this page, you can enter this PVC (VPI and VCI) value, and select DSL link type (EoA is for PPPoE, IPoE, and Bridge.), encapsulation mode and service category. Object Description VPI (Virtual Path Identifier) The virtual path between two points in an ATM netwo rk, and its valid value is from 0 to 255.
User Manual of VDR-300NU If you want to remove this Interface, pl ease select the Remove check box and click Remove . PTM Interface Choose Adv anced Setup > Layer2 Interface > PT M Interface , and the following page appears. On this page, you can add or remove to configure PTM WA N Interfaces.
User Manual of VDR-300NU Figure 5-2-6 Click Add and the followin g page appears. Figure 5-2-7 On this page, you can select an ETH port. Click Apply/ Sa ve to save configuration. If ETH Interface is selected, there are two WAN service types (PPPoE and IPoE).
User Manual of VDR-300NU 5.2.2 WAN Service Choose Advanced Se tup > WAN Service and the following page appears. Figure 5-2-8 On this page, you are allowed to add, remove, or edi t a WAN service. If PTM Interface is selected, there are three WA N service types: PPP over Ethernet (PPPoE) , IP over Ethernet , and Bridging .
User Manual of VDR-300NU Step2 On the WAN Service page, click the Add button to display as Figure 5-2-11 sho w s . You can select ATM or PTM Interface for the WAN se rvice and then click Next . Figure 5-2-11 Step3 On this page, select the WAN service type to be PPP over Ethernet (PPPoE) .
User Manual of VDR-300NU Figure 5-2-13 Object Description PPP Username The correct user name provided by your ISP. PPP Password The correct password provided by your ISP. PPPoE Service Name If your ISP provides it to you, pleas e enter it. If not, do not enter any information.
User Manual of VDR-300NU connection. Once it detects the flow (like access to a webpage), the modem restarts the PPPoE dialup. If this function is disabled, the modem performs PPPoE dial-up all the time. The PPPoE connection does not stop, unless the m odem is powered off and DSLAM or uplink equipment is abnorma l.
User Manual of VDR-300NU Step6 On this page, you can obtai n the DNS server addr esses from the selected WAN interface. Click Next to continue the setting. Figure 5-2-15 Step7 On this page, it displays the in formation about the PPPoE settings. Click Apply/Save to save and apply the settings.
User Manual of VDR-300NU Adding an IP over Ethernet WAN service This section describe s the steps for add ing the IP over Ethernet WAN service. Step1 First, add a proper ATM or PTM interface for this WAN service at Layer2 Interface . Step2 On the WAN Service page, click the Add button to display as Figure 5-2-11 shows.
User Manual of VDR-300NU If Obtain an IP address automatically is selected, DHCP will be enabled for PVC in IP over Ethernet mode. If Use the following Static IP address is selected, p lease enter the WAN IP address, subnet mask and gateway IP addre ss.
User Manual of VDR-300NU Adding a Bridging WAN service This section describe s the steps fo r adding the Bridging WAN se rvice. Step1 First, add a proper ATM or PTM interface for this WAN service at Layer2 Interface . Step2 On the WAN Service page, click the Add button to display as Figure 5-2-11 .
User Manual of VDR-300NU Adding a PPPoA WAN service This section describes the steps for adding the PPPoA WAN service. Step1 Choose Advanced Se tup > Layer2 Interface > ATM Interface to dsiplay the ATM Interface Configuration page. On this page, you need to add a PVC for PPPoA mode.
User Manual of VDR-300NU Figure 5-2-24 Step4 Select the proper interface for the WAN service an d then click Next to display the following page. Figure 5-2-25 Step5 On this page, you may modify the servic e description. Click Nex t to display the following page.
User Manual of VDR-300NU Figure 5-2-26 Object Description PPP Username The correct user name provided by your ISP. PPP Password The correct password provided by your ISP. Authentication Method The value can be AUTO, PAP, CHAP, or MSCHAP. Usually, you can select AUTO.
User Manual of VDR-300NU by an uplink equipment such as BAS, through PPPoA dial-up. If this function is enabled, the modem uses this IP addres s as the WAN IP address. Enable IPv6 for this service Enable this function, you can use IPv6 service. It will also need you to check Request IPv 6 Address and Request Prefix Delegation .
User Manual of VDR-300NU Figure 5-2-28 Step8 On this page, it displays the in formation about the PPPoA settngs. Click App ly/ Sa ve to apply the settings. You can modify the settings by clicking the Back button if necessary. Figure 5-2-29 Adding an IPoA WAN service This section describe s the steps for adding the IPoA WAN service.
User Manual of VDR-300NU Step1 Choose Advanced Setup > Layer2 Interface > ATM Interface to dsiplay the DSL ATM Interface Configuration page. On this page, you need to add a PVC for IPoA mode.
User Manual of VDR-300NU Step4 Select the proper interface for the WAN service and then click Next to display the following page. Figure 5-2-32 Step5 On this page, you may modify the service descr iption. Enter the WAN IP address, the WAN subnet mask, and primary DNS server provided by your ISP.
User Manual of VDR-300NU Step7 Select a preferred WAN interface as th e system defa ult gateway and then click Next. Figure 5-2-35 Step8 On this page, you can obtain the DNS server a ddr esses from the selected WAN interface. After finishing setting, click Next.
User Manual of VDR-300NU Step9 On this page, it displays the informatio n about the IPoA settngs. Click Apply/Save to save and apply the settings. You can modify the settings by clicking the Back button if nece ssary.
User Manual of VDR-300NU 5.2.3 3G WAN Service Choose Advanced Se tup > 3G WAN Service and the following pa ge appears. Figure 5-2-38 This page is used to configure 3 G connection. If you w ant to access the Internet through 3G co nnection, a 3G network card is required.
User Manual of VDR-300NU On this page, you are allowed to conf ig ure the settings of the 3G USB modem. Object Description Enable USB Modem If you want to access the Internet through the 3G network card, you must enable the USB modem. User Name Username provided by your 3G ISP.
User Manual of VDR-300NU If the 3G network card is installed, you may click the button on the Action column to establish or disconnect the 3G connect ion. When there is no DSL WAN connectio n, inse rt the 3G network card, and then system will perform dial-up automatically.
User Manual of VDR-300NU 5.2.4 LAN Configuration Choose Advanced Se tup > LAN and the following page ap pears. Figure 5-2-41 On this page, you can configure a n IP address for the DSL router, enabl.
User Manual of VDR-300NU Disable DHCP Server: If the DHCP server is disable d, you need to manually set the start IP address, end IP address and the lease time for the clients in the LAN. DHCP Server Enable DHCP Server: If you enable the DHCP sever, the clients will automatically acquire the IP address from the DHCP serve r.
User Manual of VDR-300NU On this page, you can set an IP addres s for the DSL IPv6 router, enable the DHCPv6 server, enabl e RADVD and enable the MLD snoo ping function.
User Manual of VDR-300NU 5.2.5 NAT Virtual Servers Firewall can prevent unexpected traffic on the Internet from your host on the LAN. The virtual serve r can create a channel that can p ass through the firewall. In that case, the host on the Internet can communicate with a host on your LAN within certain port ran ge.
User Manual of VDR-300NU Object Description Use Interface Select an interface that you want to configure Select a Service Select a proper service in the drop-down list. Custom Server Enter a new service name to establi sh a user service type. Server IP Address Assign an IP address to virtual server.
User Manual of VDR-300NU On this page, you may add or remo ve an entry of port triggering. Click the Add button to display the following page. Figure 5-2-46 Object Description Use Interface Select an interface that you want to configure Select an application Select a proper application in the drop-d own list.
User Manual of VDR-300NU After finishing se tting, click Save/Apply to apply the settings. You can use a single port numbe r, several port numbers sep arated by commas, port blocks consisting of tw o port numbers separated b y a dash, or any combinatio n of these, for example 80, 90-140, 180.
User Manual of VDR-300NU Figure 5-2-48 Click Add Fire wall and the following page appears. Figure 5-2-49 Object Description name The name of firewall. interface You can select LAN or WA N from the drop-down list. ty pe You can select IN or OUT from the drop -down list.
User Manual of VDR-300NU Choose Security > MAC Filtering and th e following page appears. Figure 5-2-50 On this page, you can add or remove the MAC filter ing rule. You may change the MAC filtering policy from FORWARDED to BLOCKE D by clicking the Change Policy button.
User Manual of VDR-300NU Object Description Protocol Type Select the proper protocol type. Destination MAC Address Enter the destination MAC address. Source MAC Address Enter the source MAC add ress. Frame Direction The direction of transmission frame.
User Manual of VDR-300NU Figure 5-2-53 After finishing setting, click Apply/Save button to save and apply the settings. Url Filter Click Advanced Setup > Parental Control > Url Filter and the following page appears. Figure 5-2-54 This page is used to prevent the LAN users from accessi ng some Websites in the WAN.
User Manual of VDR-300NU Click the Add button to display the following page. Figure 5-2-55 On this page, enter the URL address and its co rres ponding port number. Fo r example, enter the URL address http://www.google.com and the port number 80 and then click the App ly/Save button.
User Manual of VDR-300NU Queue Configuration Choose Advanced Se tup > Quality of Service > QoS Queue and the following page appears. On this page, you can enable, add or remove a QoS rule. Figure 5-2-57 The lower integer value for precedence indicates the highe r priority.
User Manual of VDR-300NU After finishing se tting, click Apply/Save to save and apply the settings. QoS Classification Choose Advanced Se tup > Quality of Service > QoS Classification and the following page appears. Figure 5-2-59 On this page, you can enable, add or remove a QoS classification rule.
User Manual of VDR-300NU 5.2.9 Routing Default Gateway Choose Advanced Se tup > Routing > Default G ateway and the following page appears. Figure 5-2-61 On this page, you can modify the default gateway settings. Select a proper WAN interface in the d rop-down list of Selected WAN Interface as the system default gateway.
User Manual of VDR-300NU Figure 5-2-63 Object Description IP Version Select the IP version. IPv4 or IPv6. Destination IP address/prefix length Enter the destination IP address. Interface Select the proper interface for the rule. Gateway IP Address The next-hop IP address.
User Manual of VDR-300NU On this page, you can add or rem o ve a static policy rule. Click the Add button to display the following page. Figure 5-2-65 On this page, enter the policy name, source IP and default gateway, and select the physi cal LAN port and interface.
User Manual of VDR-300NU 5.2.10 DNS DNS Server Choose Advanced Se tup > DNS > DNS Server and the following page appe ars. Figure 5-2-67 On this page, you can select a DNS serve r interface from the available interfaces, manually ent er the DNS server addresse s, or obtain the DNS address from a WAN interface.
User Manual of VDR-300NU On this page, you are allo wed to modify the DDNS settings. Click the Add button to display the following page. Figure 5-2-69 Object Description Hostname It is the domain name and it can be modified. Interface The interface that the packets pass through on the DSL router.
User Manual of VDR-300NU Figure 5-2-70 On this page, you can set the DSL settings. Usually, yo u do not need to modify the factory default settings. After finishing setting, click Apply/Save to save and apply the settings. 5.2.12 UPnP Choose Advanced Se tup > UPnP and the following page appears.
User Manual of VDR-300NU 5.2.13 DNS Proxy Ch oose Advanced Setup > DNS Proxy and the following page appears. Figure 5-2-72 On this page, you can e na ble or disable the DNS proxy function.
User Manual of VDR-300NU On this page, you can en able or disable the printer se rver. After finishing setting, click Apply/Save to save and apply the settings.
User Manual of VDR-300NU 5.2.15 DLNA Choose Advanced Se tup > DLNA and the followin g page appears. Figure 5-2-74 On this page, select the Enable on-board digital media serv er check box and the following page appears. On this page, enter the medi a lib rary path to run digital media server.
User Manual of VDR-300NU 5.2.17 Storage Service Share a USB storage device with PC/La ptop on the local network of the VDRT-300NU. Insert a USB storage device, such as a fl ash drive or ex ternal hard drive, into the USB port on the right side or rear side of the VDR-300NU.
User Manual of VDR-300NU Figure 5-2-78 Operation Instructions: Step 1. Create an account. 1). Click “ Add ” to display a dialog ue box below: 2) Enter a user name and a password, which will be used by clients when accessing the USB storage device for sharing files thereon.
User Manual of VDR-300NU 3) Re-type to confirm password and then click the “ Appl y/Sa ve ” b utton. Step 2. Access shared file To access resou rces on such storage devi ce, double click “ Computer ” on your PC and ente r 192.168.1.1 (The LAN IP address of the router).
User Manual of VDR-300NU At the User Name and Password pr ompt, type y our proper user name and password to login. The filename only supports Unicode .
User Manual of VDR-300NU 5.2.18 Interface Grouping Choose Advanced Se tup > Interface Grouping and the following page a ppears. Figure 5-2-79 Interface grouping supports multiple po rts to PVC and bridging groups. Each group will perform as an independent network.
User Manual of VDR-300NU Figure 5-2-80 On this page, please follow the on-screen configuratio n steps to configure the parameters of the interface grouping.
User Manual of VDR-300NU Figure 5-2-82 IPv4 in IPv6 Choose Advanced Se tup > IP Tunnel > IPv4inIPv6 and the following page a ppears. Figure 5-2-83 Click Add and the followin g page appears. On this page, you can add a ne w tunnel of IPv4 in IPv6.
User Manual of VDR-300NU 5.2.20 IPSec Choose Advanced Setup > IPSec and the following page appears. Figure 5-2-85 On this page, you can add or rem ove the IPSec tunnel connections.
User Manual of VDR-300NU 5.2.21 Certificate Local Choose Advanced Se tup > Certificate > local and the following page appears. Figure 5-2-87 On this page, you can acqui re the loca l certificate by creating a certificat e request or importing a certificate.
User Manual of VDR-300NU www.mydomain.com). Browsers use this information to identify your Web site. Some browsers will refuse to establish a secure connection with your site if the server name does not match the co mmon name in the certificate.
User Manual of VDR-300NU The certificate request ne eds to be submitted to a ce rtificate authority, which will sign the request. Then the signed certificate needs to be loade d to the DSL router. Click Load Signed Certificate on this page and the following page appears.
User Manual of VDR-300NU Trusted CA Choose Advanced Se tup > Certificate > Trusted CA and the following page appears. Figure 5-2-92 On this page, you may import or re move a CA certificate . Click the Import Certificate button to display the following page.
User Manual of VDR-300NU 5.2.22 Power Management Choose Advanced Se tup > Power Management and the following page appe ars. This page allows control of Hardware modul es to evaluate power consu mpt ion. Use the control buttons to select the desired option.
User Manual of VDR-300NU 5.2.23 Multicast Choose Advanced Setup > Multicast and the following page appears. Figure 5-2-95 On this page, you can configure th e multicas t parameters. After finishing setting, click Apply/Sav e to save and apply the settings.
User Manual of VDR-300NU 5.3 Wireless Choose Wireless and the submenus of Wireless a re shown below: Figure 5-3-1 5.3.1 Basic Settings Choose Wireless > Basic to display the following page. On this page, the figure in the right area is 2-dimensional code.
User Manual of VDR-300NU scanning. Clients Isolation When many clients connect to the same acce ss point, they can access each other. If you want to disable t he access between the clients that connect to the same access point, you can select this option.
User Manual of VDR-300NU 5.3.2 Security Choose Wireless > Secur ity to display the following page. Figure 5-3-3 This page allows you to configure the se curity featur es of the wireless LAN interface.
User Manual of VDR-300NU WPS Setup Figure 5-3-4 There are 2 primary methods used in the Wi-Fi Protected Setup: PIN entry, a mandatory method of setu p for all WPS certified devices. Enter STA PIN: If you select it, you need to enter the station PIN from client.
User Manual of VDR-300NU Figure 5-3-5 Open Mode Figure 5-3-6 Object Description Select SSID Select a SSID for configuring the securi ty settings. Network Select the Open mode.
User Manual of VDR-300NU Authentication WEP Encryption Enable or disable WEP encryption. After enabling this function, you can set the encryption strength, cu rrent network key, and net work keys. Encryption Strength You can set 64-bit or 128-bit key.
User Manual of VDR-300NU Figure 5-3-8 Object Description Select SSID Select a SSID for configuring the securi ty settings. Network Authentication Select the 802.1X in the drop-down list. RADIUS Server IP Address Enter the IP address of the RADIUS server.
User Manual of VDR-300NU WPA Mode Figure 5-3-9 Object Description Select SSID Select a SSID for configuring the securi ty settings. Network Authentication Select the WPA mode. WPA Group Rekey Interval Setting the interval for renewing key. RADIUS Server IP Address Enter the IP address of the RADIUS server.
User Manual of VDR-300NU WPA-PSK Mode Figure 5-3-10 Object Description Select SSID Select a SSID for configuring the securi ty settings. Network Authentication Select the WPA-PSK mode. WPA/WAPI passphrase The key for WPA encryption. Click t he Click here to displ ay button to display the current key.
User Manual of VDR-300NU WPA2 Mode Figure 5-3-11 Object Description Select SSID Select a SSID for configuring the securi ty settings. Network Authentication Select the WPA2 mode. WPA2 Preauthentication Enable or disable pre-authentication. Network Re-auth Interval Set the network re-auth interval.
User Manual of VDR-300NU WPA2-PSK Figure 5-3-12 For the parameters’ desc ription of WPA2-PSK mode, please refer to the WPA-PSK mode . Mixed WPA2/WPA Figure 5-3-13 For the parameters’ description of Mixed WPA2/WPA mode, please refer to the WPA2 mode .
User Manual of VDR-300NU Mixed WPA2/WPA-PSK Figure 5-3-14 For the parameters’ descript ion of Mixed WPA2/WPA-PSK mode, please refer to the WPA-P SK mode.
User Manual of VDR-300NU Object Description Disabled Disable the wireless MAC addr ess filtering function. Allow Allow the wireless clients with t he MAC addre sses in the MAC Address list to access the wireless ne twork of the wireless router.
User Manual of VDR-300NU This page allows you to configure the wireless br idge feature s of the wireless LAN interface. Object Description AP mode You may select Access Point or Wireless Bridge. Bridge Restrict Enable or disable the bridge restrict fun ction.
User Manual of VDR-300NU Channel Fill in the appropriate channel to correspond with your network setti ngs. All devices in your wireless netwo rk must use the same cha nnel in order to work correctly. This route r supports auto channeling functionality.
User Manual of VDR-300NU and a wireless client. The default value is Auto . Basic Rate Select the basic transmission rate ability for the AP. Fragmentation Threshold Packets that are larger than this thresho ld are fragmented into multiple packets. Try to increase the fragmentation threshol d if you encounter high packet error rates.
User Manual of VDR-300NU make it has very low power consumptio n. WMM Power Save is an improvement to the 802.11e amendment adding advanced power management functionality to WMM. Click Appl y/ Sa ve to configure the advanced wireless options and make the cha nges take effect.
User Manual of VDR-300NU 5.4 Diagnostics 5.4.1 Diagnostics Click Diagnostics > Diagnostic s , and the following page appears. This page is used to test th e connection to your local network, the connection to yo ur DSL service provider, and the connection to your In ternet service provider.
User Manual of VDR-300NU Click Diagnostics > Fault Manag ement and the following page ap pears. Figure 5-4-2 115.
User Manual of VDR-300NU 5.5 Management Choose Management and the submenus of Management are shown below: Figure 5-5-1 5.5.1 Settings Backup Choose Managemen t > Settings > Backup to display the followi ng page. Figure 5-5-2 On this page, click the Backup Settings button to save your router’s settings to your local PC.
User Manual of VDR-300NU Restore Default Choose Managemen t > Settings > Restore Default to display the following page. Figure 5-5-4 On this page, click the Restore default settings button, and then system returns to the default settings. 5.
User Manual of VDR-300NU Figure 5-5-6 On this page, you can set 3 types of system log modes, including Local, Remote, and Both. Object Description Local When selecting Lo cal, the events are recorded in the local memory. Remote When selecting Rem ote, the events are sent to the specified IP address and UDP port of the remote sy stem log server.
User Manual of VDR-300NU On this page, you can view the system log. Click the Refresh button to refresh the system log. Click the Close button to exit.
User Manual of VDR-300NU 5.5.4 TR-69 Client Choose Management > TR-069Clie nt to display the following page. Figure 5-5-9 WAN Management Protocol (TR-069) al lows an Auto-Configurati on Server ( ACS ) to perform auto-configuration, provisi on, collection, and diag nostics to this device.
User Manual of VDR-300NU 5.5.5 Internet Time Choose Management > Internet Time to display the following page. Figure 5-5-10 On this page, you may configure the rou ter to sync hronize its time with the Internet time servers. After enabling Automatically synchronize w ith Internet time servers , the following page appears.
User Manual of VDR-300NU Figure 5-5-12 On the page, you can modify the username and pa ssword of different users. After finishing setting, click the Apply/Sav e button to save and apply the settings. Services Choose Managemen t > Access Control > Services Con trol and the following page appears.
User Manual of VDR-300NU On this page, you can ena ble or disable the different types of services. After finishing setting, click the Apply/Sav e button to save and apply the settings. 5.5.7 Update Software Choose Managemen t > Update Software and the following page appears.
User Manual of VDR-300NU Appendix A: Planet DDNS First of all, please go to http:// www.planetddns.com to register a Planet DDNS acco unt, and refer to the FAQ ( http://www.planetddns.co m/index.php/faq ) for how to register a free account. To select DNS > Dy namic DDNS Step 1.
User Manual of VDR-300NU Step 3. Type the User Name for your DDNS account. Step 4. Type the Password for your DDNS account. Apply the settings and ensure you have conne cted the WAN port to the Internet. In a remote device, enter the Domain Name to the intern et browser’s address bar.
User Manual of VDR-300NU Appendix B: Performance of VDSL Router Profiles The table below is a performance table for profile and line dista nce; this data is just for reference. The actual data rate will vary on the quality of the telephone line and environmental factors.
User Manual of VDR-300NU Appendix C: Glossary Address mask A bit mask select bits from an Internet address for subnet addre ssing. The mask is 32 bits long and selects the network portion of the Internet address and one or more bits of the local portion.
User Manual of VDR-300NU CO Central Office. Refers to equipment locat ed at a Telco or service provider's office. CPE Customer Premises Equipment locate d in a user's premises DHCP (Dynamic Host Configuration Protocol) DHCP is software that automatica lly assigns IP addresses to client stations log ging onto a TCP/IP network.
User Manual of VDR-300NU FTP File Transfer Protocol. The Internet protocol (and program) transfer files betwee n hosts. Hop count A measure of distance b etween two points on the Int er net. It is equivalent to the number of gateways that separate the source and destination.
User Manual of VDR-300NU MAC Media Access Control Layer - A su b-layer of the Da ta Link Layer (Layer 2) of the ISO OSI Model responsible for media co ntrol. MIB Management Information Base - A collection of object s can be accessed via a network management protocol, such as SNMP and CMIP (Common Manag ement Information Protocol).
User Manual of VDR-300NU RFC Request for Comm ents - Refers to documents publi she d by the Internet Engineering Task F orce (IETF) proposing standard protocols an d procedures for the Internet. RFC can be found at www.ietf.org . Route The path that network traffic takes from its source to its destination.
User Manual of VDR-300NU Static IP Address A static IP address is an IP addre ss permanently assi gned to computer in a TCP/IP network. Static IP addresses are usually assi gned to netwo rked devices that are consistently accessed by multiple users, such as Server PCs, or printers.
User Manual of VDR-300NU WAN Wide area n etwork - A data comm unications network that spans any distance a nd is usually provided by a public carrier (such as a telepho ne company or service provider).
Een belangrijk punt na aankoop van elk apparaat Planet VDR-300NU (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Planet VDR-300NU heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Planet VDR-300NU vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Planet VDR-300NU leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Planet VDR-300NU krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Planet VDR-300NU bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Planet VDR-300NU kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Planet VDR-300NU . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.