Gebruiksaanwijzing /service van het product RC3 van de fabrikant Polar
Ga naar pagina of 31
POLAR EQUINE RC3 GPS Getting Started Guide.
CONTENTS 1. CONTENTS OF THE SET . . . . . . . . . 3 2. BUTTON FUNCTIONS . . . . . . . . . . . . 5 3. CHARGE THE TRAINING C O M P U T E R ...................... 6 4. A TT ACH THE BEL T . . . . . . . . . . . . . . . 8 5. A TT ACH THE ELECTRODE B A S E .
1. CONTENTS OF THE SET 1. Polar RC3 GPS training computer: With an integrated GPS unit the RC3 GPS provides speed, distance, altitude, ascent and descent data, as well as route information at the polarpersonaltrainer .com web service, using Global Positioning System (GPS) technology .
4. Polar Equine Belt is included in the Polar Equine RC3 GPS T rotting set (#93048830). For instructions on using the belt, see Attach the Belt (page 8 ) . 5. Polar Equine Electrode Base is included in the Polar Equine RC3 GPS set (#93048828). For instructions on using the electrode base, see Attach the Electrode Base (page 11 ) .
2. BUTTON FUNCTIONS LIGHT • Illuminate the display • Press and hold to enter QUICK MENU : In time view lock buttons, set alarm or select time zone. During training lock buttons, search sensor , adjust training sounds, set automatic lap on/off, show GPS info or show zone limits.
3. CHARGE THE TRAINING COMPUTER The RC3 GPS has an internal, rechargable battery . Charge the RC3 GPS via a USB connection on your computer by using the USB cable that comes with the product set. If you want to plug the USB connector to a wall outlet, use a USB power adapter (not included in the product set).
The RC3 GPS goes to basic settings after the first charge. T o enter the basic settings during the charge, press any button. Enter Basic Settings Y ou must enter the basic settings, even though they don’t concern the horse. If you don’t enter the basic settings, the RC3 GPS training computer will remind you to set them before every exercise.
4. A TT ACH THE BEL T Polar Equine Belt is included in the Polar Equine RC3 GPS T rotting set (#93048830) 1. Belt: The plastic electrode areas (A, B) on the reverse side of the belt detect heart rate. The pocket (C) protects the heart rate sensor from shocks and scratches and prevent it from falling off the belt.
1. For the heart rate sensor to read the heart rate properly , ensure a good contact between the plastic electrode areas and the horse’ s skin. Wet the belt properly , for example in a bucket of water (1). 2. Also wet the horse’ s hair from the areas where the electrodes of the belt are placed (2).
4. Place the belt as indicated (4), with the heart rate sensor pocket on the left side of the horse. By doing so, you ensure the electrodes of the belt being in the right position. 5. Using contact gel on the electrodes of the belt is recommended. It ensures a better detection of the horse’ s heart rate.
5. A TT ACH THE ELECTRODE BASE 1. Equine Electrode Base detects the electrical signal of every heart beat. It has a pocket for the heart rate sensor and two electrodes. The positive electrode is marked with a plus sign and the negative electrode is marked with a minus sign.
Polar Equine Electrode Base is included in the Polar Equine RC3 GPS set (#93048828) 1. Attach the heart rate sensor to the pocket of the electrode base. Close the pocket firmly . 2. The heart rate sensor picks up very small electrical impulses emitted by the heart.
See the images on this and the following page. 3. Attach the pocket to the saddle with one of the plastic straps (3). 4. Place the positive electrode pad (short cable) under the saddle (4) on the left side of the horse. Ensure that the electrode side of the pad is against the horse's skin (5).
14 ENGLISH.
6. WEAR THE SOFT STRAP 1. Moisten the electrode area of the strap. 2. Attach the heart rate sensor to the strap. 3. T ie the strap around your chest, just below the chest muscles, and attach the hook to the other end of the strap. 4. Adjust the strap length to fit tightly but comfortably .
7. ST ART TRAINING RECORDING See the full RC3 GPS user manual at www .polar .com/support for detailed information on functions during training. Start a training session by pressing ST AR T . 1. When you start a training session for the first time, Se arching for new he art r ate sensor is displayed.
3. Select the sport profile you want to use by browsing with UP/DOWN . If you have activated the GPS function in this sport profile, the RC3 GPS will automatically start searching for the signal. Y ou can set the function on in MENU > Settings > Sport profiles > Running / Cycling / Othe r Sport .
5. The check mark indicates that the signal is found. In this image the RC3 GPS has found the heart rate sensor signal and the GPS signal. If the RC3 GPS does not find the signal, the display shows a triangle with an exclamation mark. Once the RC3 GPS has found all the signals, press ST AR T .
8. TROUBLESHOOTING Abnormal Heart Rate Readings During Exercise • Make sure the positions of the electrode pads are correct and they are right side up. Check also that the girth is tight enough. • Make sure the horse’s hair under the electrode pads is thoroughly moistened.
underpasses, tall buildings, terrain or forested areas). Go outdoors and away from tall buildings and trees. In good conditions, acquiring satellite signals for the first time typically takes 30-60 seconds. Note that the GPS reception does not work indoors.
9. IMPORT ANT INFORMA TION Care and Maintenance Follow the caring instructions to ensure reliable measurement and to maximize the life span of the electrode base and the heart rate sensor . The following instructions will help you fulfill the guarantee obligations.
Heart rate sensor: Detach the heart rate sensor from the electrode base/belt/soft strap after every use and dry it with a soft towel. Clean the heart rate sensor with a mild soap and water solution when needed. Never use alcohol or any abrasive material (e.
Battery Information T raining Computer The training computer contains a rechargeable battery . Polar encourages you to minimize possible effects of waste on the environment and human health by followi.
Heart Rate Sensor The Polar heart rate sensor has a user changeable battery . When changing the battery , make sure the sealing ring is not damaged, in which case you should replace it with a new one to ensure the water resistance of the connector .
T o change the battery: 1. Lever the battery cover open by using the bracket on the strap. 2. Remove the old battery from the battery cover with a suitable sized small ridgid stick or bar , such as a toothpick. A non-metal tool is preferable. Be careful not to damage the battery cover .
Service During the 12-month guarantee/warranty period we recommend that you have service, other than battery replacement, done by an authorized Polar Service Center only . The warranty does not cover damage or consequential damage caused by service not authorized by Polar Electro.
Guarantee with respect to any product will be limited to countries where the product has been initially marketed. Regulatory information is available at www .polar .com/support. Compliance Statement Canada Polar Electro Oy has not approved any changes or modifications to this device by the user .
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appa.
try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver . 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
This marking shows that the product is protected against electric shocks. Copyright © 2013 Polar Electro Oy , FI-90440 KEMPELE. Polar Electro Oy is a ISO 9001:2008 certified company . All rights reserved. No part of this manual may be used or reproduced in any form or by any means without a prior written permission of Polar Electro Oy .
Manufactured by Polar Electro Oy Professorintie 5 FIN-90440 KEMPELE Tel +358 8 5202 100 Fax +358 8 5202 300 www.polar.com.
Een belangrijk punt na aankoop van elk apparaat Polar RC3 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Polar RC3 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Polar RC3 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Polar RC3 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Polar RC3 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Polar RC3 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Polar RC3 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Polar RC3 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
