Gebruiksaanwijzing /service van het product g8 van de fabrikant Pontiac
Ga naar pagina of 356
Seats and Restraints ......... 1 - 1 Front Seats .................... 1 - 2 Rear Seats .................... 1 - 5 Safety Belts ................... 1 - 5 Airbag System .............. 1-20 Child Restraints ............. 1-34 Keys, Doors and Windows ....
GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem, are registered trademarks of General Motors Corporation, and the name G8 is a trademark of General Motors Corporation. This manual includes the latest information at the time it was printed.
Cautions and Notices A circle with a slash through it is a safety symbol which means “Do Not,” “Do not do this” or “Do not let this happen.” A box with the word CAUTION is used to tell about things that could hurt you or others if you were to ignore the warning.
✍ NOTES iv Preface.
Seats and Restraints Front Seats Front Seats ....................... .1-2 Manual Seats .................... .1-2 Power Seat(s) .................... .1-2 Lumbar Seat Adjustment . . . .1-2 Reclining Seatbacks .......... .1-3 Head Restraints ............
Front Seats A. Head Restraints on page 1-4 . B. Lumbar Seat Adjustment on page 1-2 . C. Reclining Seatbacks on page 1-3 . D. Power Seat(s) on page 1-2 . E. Manual Seats on page 1-2 . Manual Seats { CAUTION You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving.
Reclining Seatbacks { CAUTION You can lose control of the vehicle if you try to adjust the seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver’s seat only when the vehicle is not moving.
Head Restraints The front seats have adjustable head restraints in the outboard seating positions. The rear seats have head rests in the outboard seating positions.
Heated Seats On vehicles with heated front seats, the controls are located on the center console. To operate the heated seats the ignition must be on. L (Heated Seat): Press to turn on the heated seat.
{ CAUTION It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts.
Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop. The person keeps going until stopped by something. In a real vehicle, it could be the windshield... or the instrument panel... or the safety belts! With safety belts, you slow down as the vehicle does.
Questions and Answers About Safety Belts Q: Will I be trapped in the vehicle after a crash if I am wearing a safety belt? A: You could be — whether you are wearing a safety belt or not. But your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted.
First, before you or your passenger(s) wear a safety belt, there is important information you should know. Sit up straight and always keep your feet on the floor in front of you. The lap part of the belt should be worn low and snug on the hips, just touching the thighs.
Q: What is wrong with this? A: The lap belt is too loose. It will not give nearly as much protection this way. { CAUTION You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen.
{ CAUTION You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you.
Q: What is wrong with this? A: The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. { CAUTION You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury.
{ CAUTION You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury. You might also slide under the lap belt.
Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder belt. The following instructions explain how to wear a lap-shoulder belt properly. 1. Adjust the seat, if the seat is adjustable, so you can sit up straight. To see how, see “Seats” in the Index.
4. To make the lap part tight, pull up on the shoulder belt. It may be necessary to pull stitching on the safety belt through the latch plate to fully tighten the lap belt on smaller occupants. To unlatch the belt, push the button on the buckle. The belt should return to its stowed position.
Rear Safety Belt Comfort Guides Rear shoulder belt comfort guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed on a shoulder belt, the comfort guide positions the shoulder belt away from the neck and head.
{ CAUTION A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.
Care of Safety Belts Keep belts clean and dry. { CAUTION Do not bleach or dye safety belts. If you do, it may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.
Airbag System The vehicle has the following airbags: • A frontal airbag for the driver. • A frontal airbag for the right front passenger. • A seat-mounted side impact airbag for the driver. • A seat-mounted side impact airbag for the right front passenger.
{ CAUTION Airbags inflate with great force, faster than the blink of an eye. Anyone who is up against, or very close to, any airbag when it inflates can be seriously injured or killed. Do not sit unnecessarily close to the airbag, as you would be if you were sitting on the edge of your seat or leaning forward.
Where Are the Airbags? The driver frontal airbag is in the middle of the steering wheel. The right front passenger frontal airbag is in the instrument panel on the passenger’s side. The seat-mounted side impact airbags for the driver and right front passenger are in the side of the seatbacks closest to the door.
When Should an Airbag Inflate? Frontal airbags are designed to inflate in moderate to severe frontal or near-frontal crashes to help reduce the potential for severe injuries mainly to the driver’s or right front passenger’s head and chest. However, they are only designed to inflate if the impact exceeds a predetermined deployment threshold.
In addition, the vehicle has dual-stage frontal airbags. Dual-stage airbags adjust the restraint according to crash severity. The vehicle has electronic frontal sensors, which help the sensing system distinguish between a moderate frontal impact and a more severe frontal impact.
What Makes an Airbag Inflate? In a deployment event, the sensing system sends an electrical signal triggering a release of gas from the inflator. Gas from the inflator fills the airbag causing the bag to break out of the cover and deploy. The inflator, the airbag, and related hardware are all part of the airbag module.
The parts of the airbag that come into contact with you may be warm, but not too hot to touch. There may be some smoke and dust coming from the vents in the deflated airbags. Airbag inflation does not prevent the driver from seeing out of the windshield or being able to steer the vehicle, nor does it prevent people from leaving the vehicle.
Passenger Sensing System The vehicle has a passenger sensing system for the right front passenger position. The passenger airbag status indicator will be visible in the rearview mirror when the vehicle is started. The words ON and OFF, or the symbol for on and off, will be visible during the system check.
A label on the sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. { CAUTION A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates.
The passenger sensing system is designed to turn on (may inflate) the right front passenger frontal airbag anytime the system senses that a person of adult size is sitting properly in the right front passenger seat.
If the Off Indicator is Lit for an Adult-Size Occupant If a person of adult-size is sitting in the right front passenger seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat.
See Adding Equipment to Your Airbag-Equipped Vehicle on page 1-32 for more information about modifications that can affect how the system operates. The passenger sensing system may suppress the airbag deployment when liquid soaks into the seat.
Adding Equipment to Your Airbag-Equipped Vehicle Q: Is there anything I might add to or change about the vehicle that could keep the airbags from working properly? A: Yes. If you add things that change the vehicle’s frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly.
In addition, your dealer/retailer and the service manual have information about the location of the airbag sensors, sensing and diagnostic module and airbag wiring. Airbag System Check The airbag system does not need regularly scheduled maintenance or replacement.
Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle’s safety belts. The manufacturer’s instructions that come with the booster seat, state the weight and height limitations for that booster.
In a crash, children who are not buckled up can strike other people who are buckled up, or can be thrown out of the vehicle. Older children need to use safety belts properly. { CAUTION Never do this. Never allow two children to wear the same safety belt.
Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints.
{ CAUTION Never do this. Never hold an infant or a child while riding in a vehicle. Due to crash forces, an infant or a child will become so heavy it is not possible to hold it during a crash. For example, in a crash at only 25 mph (40 km/h), a 12 lb (5.
Q: What are the different types of add-on child restraints? A: Add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic types.
Child Restraint Systems A rear-facing infant seat (A) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. A forward-facing child seat (B) provides restraint for the child’s body with the harness.
Securing an Add-On Child Restraint in the Vehicle { CAUTION A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle.
{ CAUTION A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag.
Lower Anchors and Tethers for Children (LATCH) The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system.
Your child restraint may have a single tether (A) or a dual tether (C). Either will have a single attachment (B) to secure the top tether to the anchor. Some child restraints with top tethers are designed for use with or without the top tether being attached.
The top tether anchors are located on the rear seatback filler panel. Be sure to use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed.
{ CAUTION Do not attach more than one child restraint to a single anchor. Attaching more than one child restraint to a single anchor could cause the anchor or attachment to come loose or even break during a crash.
2. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if equipped. Refer to the child restraint instructions and the following steps: 2.1. Find the top tether anchor.
If the position you are using has a fixed headrest or head restraint and you are using a dual tether, route the tether around the headrest or head restraint. If the position you are using has a fixed headrest or head restraint and you are using a single tether, route the tether over the head restraint.
Securing Child Restraints (Rear Seat) When securing a child restraint in a rear seating position, study the instructions that came with your child restraint to make sure it is compatible with this vehicle.
Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary. 4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock.
Securing Child Restraints (Right Front Seat) This vehicle has airbags. A rear seat is a safer place to secure a forward-facing child restraint. See Where to Put the Restraint on page 1-40 . In addition, the vehicle has a passenger sensing system which is designed to turn off the right front passenger frontal airbag under certain conditions.
If the child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH) on page 1-42 for how and where to install the child restraint using LATCH. If a child restraint is secured using a safety belt and it uses a top tether, see Lower Anchors and Tethers for Children (LATCH) on page 1-42 for top tether anchor locations.
5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor.
Keys, Doors and Windows Keys Keys .................................. .2-2 Remote Keyless Entry (RKE) System .................. .2-3 Remote Keyless Entry (RKE) System Operation ......................... .2-4 Remote Vehicle Start ......... .2-6 Doors and Locks Door Locks .
Keys { CAUTION Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed.
Remote Keyless Entry (RKE) System The Remote Keyless Entry (RKE) system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Remote Keyless Entry (RKE) System Operation The Remote Keyless Entry (RKE) transmitter functions will work up to 195 feet (60 m) away from the vehicle. There are other conditions which can affect the performance of the transmitter. See Remote Keyless Entry (RKE) System on page 2-3 .
L (Vehicle Locator/Panic Alarm): Press and release one time to locate the vehicle. The exterior lamps flash and the horn chirps. Press and hold L for at least two seconds to sound the panic alarm. The horn sounds and the turn signals flash until L is pressed again or the key is placed in the ignition and turned to ON/RUN.
Remote Vehicle Start Your vehicle may have this feature which allows you to start the engine from outside the vehicle. / (Remote Vehicle Start): This button will be on the RKE transmitter if you have remote start. To enable and disable remote start, see “Remote Start” under DIC Vehicle Customization on page 4-31 .
Extending Engine Run Time To extend the engine run time by 10 minutes, repeat Steps 1 and 2 while the engine is still running. The engine run time can only be extended if it is the first remote start since the vehicle has been driven. Remote start can be extended one time.
Doors and Locks Door Locks { CAUTION Unlocked doors can be dangerous. • Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. You increase the chance of being thrown out of the vehicle in a crash if the doors are not locked.
The door lock cylinder turns freely when either the wrong key is used, or the correct key is not fully inserted. The free turning door lock feature prevents the lock from being forced open. To reset the lock, turn it to the vertical position with the correct key fully inserted.
Trunk { CAUTION It can be dangerous to drive with the trunk lid open because carbon monoxide (CO) gas can come into your vehicle. You cannot see or smell CO.
There is an emergency trunk release handle located inside the trunk on the trunk latch. Access the release handle by folding the rear seat center seatback. See Rear Seat Operation on page 1-5 . Pull the release handle to open the trunk from the inside.
Immobilizer Operation This vehicle has a passive theft-deterrent system. The system is automatically armed when the key is removed from the ignition. The system is disarmed when the key is turned to ON/RUN. You do not have to manually arm or disarm the system.
3. Insert and turn the new section (A) to ON/RUN within five seconds of removing the original key. 4. Turn the new section (A) to LOCK/OFF. Section (A) is now programmed. To program a new section (B): 1. Turn the ignition to ON/RUN with the new section (A).
How to Detect a Tamper Condition If K is pressed and the horn sounds, an attempted break-in has occurred while the system was armed. If the alarm has been activated, the Alarm Activated message appears followed by a message showing what location set off the alarm.
Power Windows A. Power Window Switches B. Rear Window Lockout Switch The power window switches (A) for all doors are located on the center console. The switches work when the ignition is in ON/RUN, ACC/ACCESSORY, or in Retained Accessory Power (RAP). See Retained Accessory Power (RAP) on page 8-3 .
Mirrors Manual Rearview Mirror The vehicle has a manual rearview mirror with a compass display and OnStar ® control buttons located at the bottom of the mirror. See your dealer/retailer for more information on the system and how to subscribe to OnStar.
mount, magnetic note pad holder, or a similar magnetic item. If CAL should ever display in the compass window, the compass might need calibration. Press and hold Y for several seconds to activate the compass calibration mode. CAL displays in the compass window on the mirror.
Manually fold the mirrors inward to prevent damage when going through an automatic car wash. To fold, push the mirror toward the vehicle. Push the mirror outward, to return to its original position. Outside Convex Mirror { CAUTION A convex mirror can make things (like other vehicles) look farther away than they really are.
Storage Storage Glove Box ......................... .3-1 Cupholders ........................ .3-1 Center Console Storage .... .3-1 Convenience Net ............... .3-2 Storage Glove Box Lift the glovebox handle up to open it. Use the key to lock and unlock the glovebox.
Convenience Net A convenience net is provided inside the trunk to secure loose items. Four hooks are provided, on each side of the trunk. The net has six loops to attach on the hooks. To install the net, attach each of the corner loops (A, B) to the four hooks inside the trunk, leaving the center loop (C) unhooked.
Instruments and Controls Instrument Panel Overview Instrument Panel Overview .......................... .4-2 Hazard Warning Flashers ........................... .4-4 Horn .................................. .4-4 Tilt Wheel .......................... .4-4 Turn Signal/Multifunction Lever .
Instrument Panel Overview 4-2 Instruments and Controls.
The main components of the instrument panel are the following: A. Turn Signal/Multifunction Lever on page 4-4 . B. Audio Steering Wheel Controls on page 6-36 and DIC Operation and Displays on page 4-22 . C. Instrument Panel Cluster on page 4-11 . D. Audio Steering Wheel Controls on page 6-36 .
Hazard Warning Flashers | (Hazard Warning Flasher): Press this button located on the instrument panel, to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. Press | again to turn the flashers off.
Cruise Control For vehicles with cruise control, the lever is located on the left side of the steering wheel. The cruise control maintains the vehicle’s speed without having your foot on the accelerator pedal. The cruise control only works at speeds above 21 mph (33 km/h) (V6 engines) or above 24 mph (38 km/h) (V8 engines).
If the vehicle is in cruise control and the Electronic Stability Program (ESP) becomes active, the cruise control automatically disengages. See Electronic Stability Program on page 8-19 . When road conditions allow the cruise control can be used again.
When going downhill, you might have to brake or shift to a lower gear to keep the vehicle speed down. When the brakes are applied the cruise control is turned off. Ending Cruise Control • Step lightly on the brake pedal. When the cruise control is deactivated, the CRUISE INACTIVE message appears in the instrument panel cluster.
Windshield Wipers The windshield wiper/washer lever is located on the right side of the steering column. The ignition must be turned to the ON/RUN or ACC/ACCESSORY position to use the windshield wipers. Move the lever to the following positions: z (Mist): Hold the lever in this position for continuous wiping cycles.
Accessory Power Outlet(s) The accessory power outlets can be used to connect auxiliary electrical equipment, such as a cellular phone. The vehicle has two accessory power outlets. One accessory power outlet is located under the climate controls and the other is located inside the center floor console.
Warning Lights, Gages, and Indicators Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gages could prevent injury. Warning lights come on when there may be or is a problem with one of the vehicle’s functions.
Instrument Panel Cluster The instrument panel cluster is designed to let you know at a glance how your vehicle is running. You will know how fast you are going, how much fuel you have, and many other things you will need to drive safely and economically.
Speedometer The speedometer can display your speed in both miles per hour (MPH) and kilometers per hour (km/h). You can select between MPH and km/h using the UNITS display in the DIC. See DIC Operation and Displays on page 4-22 for more information. Tachometer The tachometer displays the engine speed in revolutions per minute.
Airbag Readiness Light There is an airbag readiness light which shows the airbag symbol. The system checks the airbag’s electrical system for malfunctions.
Passenger Airbag Status Indicator The vehicle has a passenger sensing system. See Passenger Sensing System on page 1-27 for important safety information.
Voltmeter Gage The voltmeter shows the voltage output of your battery. It is located in the center of the instrument panel. Charging System Light This light will come on briefly when you turn on the ignition, and the engine is not running, as a check to show it is working.
When the ignition is on, the brake system warning light will also come on when you set your parking brake. The light will stay on if your parking brake does not release fully. If it stays on after your parking brake is fully released, it means you have a brake problem.
If the light remains on after resetting the system or comes on again while driving, your vehicle needs service. If the ABS light is on, but the regular brake system warning light is not on, the antilock brakes are not working properly, but the regular brakes are still functioning.
Malfunction Indicator Lamp Check Engine Light A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors operation of the fuel, ignition, and emission control systems. It ensures that emissions are at acceptable levels for the life of the vehicle, helping to produce a cleaner environment.
This light comes on during a malfunction in one of two ways: Light Flashing: A misfire condition has been detected. A misfire increases vehicle emissions and could damage the emission control system on the vehicle. Diagnosis and service might be required.
Emissions Inspection and Maintenance Programs Some state/provincial and local governments have or might begin programs to inspect the emission control equipment on the vehicle. Failure to pass this inspection could prevent getting a vehicle registration.
Daytime Running Lamps (DRL) Indicator Light This light turns on whenever the Daytime Running Lamps are on. See Daytime Running Lamps (DRL) on page 5-2 for more information. Door Ajar Light When the ignition is on, this light stays on until all doors are closed and completely latched.
Driver Information Center (DIC) The DIC displays information about your vehicle. It also displays warning messages if a system problem is detected. The DIC also allows some features to be customized. See DIC Vehicle Customization on page 4-31 for more information.
Trip/Fuel Menu Items Press 3 to scroll through the following menu items: • Speedometer • UNITS • Tire Pressure • Customize Options • Odometer/Trip Odometer • Distance/Time To Go • Range • Avg (Average)Speed/Avg (Average) Fuel • OverSpeed Speedometer Press 3 until the speedometer is displayed.
Distance/Time To Go Press 3 until To Go is displayed. If this item doesn’t display, check that the display is turned on through the Customize Options menu. See DIC Vehicle Customization on page 4-31 for more information. At the start of a trip, estimate the distance to arrival (for example, from maps, road signs).
Preset 1: Default setting 30 MPH (48 km/h) Preset 2: Default setting 45 MPH (72 km/h) Preset 3: Default setting 55 MPH (89 km/h) Preset 4: Default setting 70 MPH (113 km/h) The selection is set automatically after a few seconds. The corresponding value of the presets will be shown on the display.
Adjusting the Setting During an OverSpeed Warning While the OverSpeed warning is displayed move the thumbwheel up Q or down R to adjust the value when in Manual mode or to select a different preset when in Preset mode. Press and hold 8 for more than 3 seconds to set the value to the nearest 5 MPH or km/h above the current vehicle’s speed.
9 Airbag Fault This message is displayed if there is a problem with the airbag system or safety belt pretensioner system. See Airbag System on page 1-20 and “Safety Belt Pretensioners” under Lap-Shoulder Belt on page 1-14 . The Airbag Readiness light may also come on in the instrument panel cluster.
: Check Oil This message is displayed if the oil pressure or oil level is low. Stop when safe, turn off the engine and check the engine oil level. See Engine Oil on page 9-8 . Do not run the engine when this warning is illuminated. If the oil level is normal, have the system checked at your dealer/retailer.
y OverSpeed This message is displayed when the vehicle’s speed is greater than the set OverSpeed value. See “OverSpeed” under DIC Operation and Displays on page 4-22 .
Service Charging System This message is displayed when there is a fault in the battery charging system, see your dealer/retailer. You can press 3 or 8 to acknowledge that you received the message, but " Low Batt will continue to appear in the bottom of the DIC display until the vehicle has been serviced.
You can press 3 or 8 to acknowledge that you received the message, but ESP OFF will continue to appear in the bottom of the DIC display until the vehicle has been serviced. 7 Check XX Tire Pressure This message is displayed when the inflation pressure is low or very low in the indicated tire.
The following items are part of the main customization menu. • Exit • Reset settings • Security • Lighting • Trip Computer • Language • Remote key See the information following for detailed descriptions of the items available under each menu item.
All doors in park: All doors will unlock when you put the shift lever into P (Park). Auto lock If you select Auto lock you will be able to choose when you want the doors to lock automatically. At vehicle speed: The doors will lock when the vehicle speed is at or above 8 mph (13 km/h).
Underspeed Chime If you select Underspeed Chime you will be able to enable or disable the underspeed chime feature. See DIC Operation and Displays on page 4-22 for more information. Distance to go If you select Distance to go you will be able to choose if you want the distance to go display to be shown on the DIC.
OnStar ® System OnStar uses several innovative technologies and live advisors to provide a wide range of safety, security, information, and convenience services. If the airbags deploy, the system is designed to make an automatic call to OnStar Emergency advisors who can request emergency services be sent to your location.
OnStar Services Available with the Safe & Sound Plan • Automatic Notification of Airbag Deployment • Advanced Automatic Crash Notification (AACN) (If equipped) • Link to Emergency Services.
OnStar Virtual Advisor OnStar Virtual Advisor is a feature of OnStar Hands-Free Calling that uses minutes to access location-based weather, local traff ic reports, and stock quotes. Press the phone button and give a few simple voice commands to browse through the various topics.
Location information about the vehicle is only available if the GPS satellite signals are unobstructed and available. The vehicle must have a working electrical system, including adequate battery power, for the OnStar equipment to operate.
Lighting Lighting Exterior Lamps Controls .... .5-1 Daytime Running Lamps (DRL) ................... .5-2 Automatic Headlamp System ............................ .5-2 Fog Lamps ........................ .5-3 Instrument Panel Brightness ..................
; (Parking Lamps): Turns on the parking lamps together with the following: • Taillamps • License Plate Lamps • Instrument Panel Lights • Sidemarker Lamps 2 (Headlamps): Turns on the headlamps .
The vehicle has a light sensor located on top of the instrument panel. Do not cover the sensor or the headlamps will come on when they are not needed. The system may also turn on the headlamps when driving through a parking garage or tunnel. Fog Lamps For vehicles with this feature, it provides better visibility in foggy or misty conditions.
Dome Lamp(s) + (On/Off): Press to turn the lamp on or off. & (Door): Press this button in and the lamps automatically turn on when a door is opened, the vehicle is unlocked, or the key is removed from the ignition. The lamps dim to off after all the doors are closed.
Infotainment Audio System(s) Audio System(s) ................ .6-1 Setting the Clock ............... .6-2 Radio(s) ............................ .6-3 Using an MP3 .................. .6-20 XM Radio Messages ........ .6-24 Bluetooth ® ..................
Notice: Before adding any sound equipment to your vehicle, such as an audio system, CD player, CB radio, mobile telephone, or two-way radio, make sure that it can be added by checking with your dealer/retailer. Also, check federal rules covering mobile radio and telephone units.
Radio(s) Radio with Single CD Player Infotainment 6-3.
The vehicle has one of these radios as its audio system. Playing the Radio } (Power): Press to turn the system on and off. Radio with Single CD Player Volume: The volume knob is located on the center of the radio. Turn to adjust the volume. 0 (Mute): Press to immediately stop the volume.
Radio with Six-Disc CD Player u (Volume/Mute): Turn to adjust the volume. Press to immediately stop the volume. While the volume is off, MUTED displays. To cancel Mute, do one of the following: • Press u . • Increase the radio volume. • Turn the radio off and on.
To use Local/Distant on the radio with a six-disc CD player: 1. Press the MENU knob to enter the Option Menu. 2. Turn the MENU knob until Seek Sens highlights. 3. Press the MENU knob to enter the Seek Sens setting. 4. Turn the MENU knob and highlight either Local, Distance, or Auto.
Setting Preset Stations Up to 42 stations (six FM1, six FM2, six AM, six FM ASM, six AM ASM, six XM1, and six XM2), can be programmed. 1. Press BAND to select FM1, FM2, A M ,X M 1 ,o rX M 2 .
To adjust the bass and treble on the radio with a six-disc CD player: 1. Press the MENU knob to enter the Option Menu, Audio is highlighted. 2. Press the MENU knob to enter the Audio menu. 3. Turn the MENU knob until Bass or Treble highlights. 4. Press the MENU knob to enter the Bass or Treble settings.
To adjust the balance and fade on the radio with a six-disc CD player: 1. Press the MENU knob to enter the Option Menu, Audio is highlighted. 2. Press the MENU knob to enter the Audio menu. 3. Turn the MENU knob until Balance or Fader highlights. 4. Press the MENU knob to enter the Balance or Fader settings.
Radio Message Security Lockout Active: This message displays when the coded security system has been activated. Take the vehicle to your dealer/retailer for service. Radio Messages for XM Only See XM Radio Messages on page 6-24 later in this section for further detail.
To insert multiple CDs: 1. Press and hold # LOAD for more than two seconds, a beep sounds and Loading All Discs displays. 2. The display, the beeps, and the load indicator light prompts when to insert each CD. 3. Insert a CD label side up partway into the slot.
Playing CDs RPT/ REPEAT: When Repeat is selected, tracks or discs can be repeated. To use repeat with the radio with a single CD player, press RPT to replay the current track continuously. Press it again to cancel repeat. To use repeat with the radio with a six-disc CD player, press the softkey below REPEAT to select between.
BAND: Press to stop CD playback and play the radio. g (Reverse): Press to go back to the start of the current track or press multiple times until the desired track is reached. g TRACK (Reverse): Press to go back to the start of the current track or press multiple times until the desired track is reached.
• Pick up CDs by grasping the outer edges or the edge of the hole and the outer edge. • Store CDs in their original cases or other protective cases and away from direct sunlight and dust.
Connect a 3.5 mm (1/8 inch) cable between the radio’s front auxiliary input jack and a portable audio player. The radio automatically detects the device and AUX INPUT DEVICE displays.
Additional Features Help Prompts: Allows help information to be displayed for eight seconds after the request for that button or feature has been made. To enable or disable help prompts: 1. Press the MENU knob to enter the Options Menu. 2. Turn the MENU knob until Help Prompts highlights.
Startup Screen: To enable or disable the startup screen on the radio with a six-disc CD player: 1. Press the MENU knob to enter the Options Menu. 2. Turn the MENU knob until Welcome highlights. 3. Press the MENU knob to access the Welcome menu. 4. Turn the MENU knob to change the setting to On or Off.
Speed Dependent Volume (SDV): The SDV system automatically adjusts the radio volume to compensate for driving noise. The SDV system can only be adjusted while the radio is on. As the speed of the vehicle increases or decreases, the radio volume increases or decreases.
5. Press the volume knob to enter the DDL setting. 6. Turn the volume knob to adjust the DDL setting. 7. Press the volume knob to save and exit the setting. 8. Select the BACK option or wait eight seconds to exit the menu. To adjust the DDL setting on the radio with a six-disc CD player: 1.
Personal Identity Memories (Radio with Six-Disc CD Player) Personal Identity Memories are coded to the vehicle’s keys. Only two keys can be coded. The settings are stored by the vehicle and are unique to each key.
To record an MP3 disc: • Record the MP3 files onto a CD-R or CD-RW disc. • Record playlists with an .m3u or .wpl extension. • Do not mix standard audio and MP3 files on the same disc. • Record the entire disc at once. • Finalize the disc when recording an MP3 disc with multiple sessions.
Preprogrammed Playlists Playlists are accessed before files or folders in the root directory. Preprogrammed playlists created by WinAmp™, MusicMatch™, or Real Jukebox™ software can be accessed and are treated as special folders containing compressed audio song files.
REPEAT: Select to repeat tracks or folders. To use REPEAT: 1. Press the softkey below the REPEAT label to display the different repeat modes. 2. Press the softkey below REPEAT TRACK, REPEAT DISC, or REPEAT FOLDER to chose that mode. 3. Press the softkey below the active repeat mode to cancel the repeat mode.
l (Forward): Press to go to the next track or press l multiple times until the desired track is reached. g (Reverse): Press to go back to the start of the current track or press g multiple times until the desired track is reached.
XM Radio ID: If tuned to channel 0, this message alternates with the XM™ Radio 8 digit radio ID label. This label is needed to activate the service. Unknown: If this message is received when tuned to channel 0, there could be a receiver fault. Consult with your dealer/retailer.
Bluetooth Controls Use the buttons located on the steering wheel to operate the in-vehicle Bluetooth system. See Audio Steering Wheel Controls on page 6-36 for more information. % (Voice In): Press to answer incoming calls, to confirm system information, and to start speech recognition.
5. The system prompts for a name for the phone. Use a name that best describes the phone. This name will be used to indicate which phone is connected. The system then confirms the name provided. 6. The system responds with “<Phone name> has been successfully paired” after the pairing process is complete.
Storing Name Tags The system can store up to thirty phone numbers as name tags that are shared between the Bluetooth and OnStar systems. The system uses the following commands to store and retrieve ph.
3. Say the first digit to be stored. The system will repeat back the digit it heard followed by a tone. Continue entering digits until the number to be stored is complete. • If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number.
Using the Delete Command The delete command allows specific name tags to be deleted. To use the delete command: 1. Press and hold % for two seconds. The system responds with “Ready” followed by a tone. 2. Say “Delete”. The system responds with “Delete, please say the name tag” followed by a tone.
3. Say the entire number without pausing. • If the system recognizes the number, it responds with “OK, Dialing” and dials the number. • If the system does not recognize the number, it confirms the numbers followed by a tone. If the number is correct, say “Yes”.
Using the Re-dial Command 1. Press and hold % for two seconds. The system responds with “Ready” followed by a tone. 2. After the tone, say “Re-dial”. The system responds with “Re-dial using <phone name>” and dials the last number called from the connected Bluetooth phone.
Muting a Call During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. To Mute a call 1. Press % . The system responds with “Ready” followed by a tone. 2. Say “Mute Call”.
3. Say “Voice”. The system responds with “OK, accessing <phone name>”. • The cell phone’s normal prompt messages will go through its cycle according to the phone’s operating instructions. Dual Tone Multi-Frequency (DTMF) Tones The in-vehicle Bluetooth system can send numbers and numbers stored as name tags during a call.
Clearing the System Unless information is deleted out of the in-vehicle Bluetooth system, it will be retained indefinitely. This includes all saved name tags in the phonebook and phone pairing information. For information on how to delete this information, see the above sections on Deleting a Paired Phone and Deleting Name Tags.
Audio Steering Wheel Controls The vehicle has audio steering wheel controls. Some audio controls can be adjusted at the steering wheel. SRCE (Source): Press to select between FM1, FM2, AM, CD, Front AUX (auxiliary), or Rear AUX. QR (Scroll Wheel Control): Push to select the next disc in the changer.
XM Satellite Radio Service XM Satellite Radio Service gives digital radio reception from coast-to-coast in the 48 contiguous United States, and in Canada. Just as with FM, tall buildings or hills can interfere with satellite radio signals, causing the sound to fade in and out.
✍ NOTES 6-38 Infotainment.
Climate Controls Climate Controls Climate Control System ..... .7-1 Automatic Climate Control System ................ .7-4 Outlet Adjustment .............. .7-9 Climate Controls Climate Control System The heating, cooling, and ventilation for the vehicle can be controlled with this system.
9 (Fan Control): Turn clockwise or counterclockwise to increase or decrease the fan speed. Turn the knob all the way counterclockwise to turn the system off. Temperature Control: Turn clockwise or counterclockwise to increase or decrease the temperature inside the vehicle.
The air conditioning system removes moisture from the air, so a small amount of water might drip under the vehicle while idling or after turning off the engine. This is normal. The air conditioning should be turned on for at least five to ten minutes once every two weeks to lubricate the air conditioning seals, even in the winter.
Automatic Climate Control System The heating, cooling, and ventilation for the vehicle can be controlled with this system. For vehicles with the remote start feature, the climate control system will turn on with a remote start. See Remote Vehicle Start on page 2-6 .
2. Adjust the temperature to a comfortable setting between 72°F (22°C) and 75°F (24°C). Choosing the coldest or warmest temperature setting will not cause the system to heat or cool any faster. 3. Let the system stabilize for a few minutes. 4. Adjust the air outlets or temperature.
Dual-Zone (DZ) Mode: Allows different temperatures to be set for the driver and passenger sides or to link them. When linked, the passenger side temperature uses the same temperature setting as the driver side. Turn the AUTO control to set a different temperature for the passenger.
Air Conditioning # (Air Conditioning): Press to turn the air conditioning system on or off. The # appears in the display when the air conditioning is on. When the air conditioning is turned off # OFF appears in the display. The air conditioning cannot be turned off in defrost mode.
Rear Window Defogger The rear window defogger uses a warming grid to remove fog or frost from the rear window. It only works when the ignition is in ON/RUN. The rear window defogger will only work when the ignition is in ON/RUN. + (Rear Window Defogger): Press to turn the rear window defogger on or off.
Personal Identity Keys For vehicles with the Personal Identity Key Locking System, the system remembers the last climate control settings used with different keys. When the unlock button is pressed, the system remembers the key and sets the climate control system to the last settings used with that key.
✍ NOTES 7-10 Climate Controls.
Driving and Operating Starting and Operating Your Vehicle New Vehicle Break-In ........ .8-2 Ignition Positions ............... .8-2 Retained Accessory Power (RAP) .................... .8-3 Starting the Engine ............ .8-4 Engine Coolant Heater .
Starting and Operating Your Vehicle New Vehicle Break-In Notice: Your vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: • Do not drive at any one constant speed, fast or slow, for the first 500 miles (805 km).
A (LOCK/OFF): This is the only position from which you can remove the key. This locks the steering wheel, ignition and automatic transmission. On vehicles with an automatic transmission, the shift lever must be in P (Park) to turn the ignition switch to the LOCK/OFF position.
Starting the Engine Place the transmission in the proper gear. Automatic Transmission Move the shift lever to P (Park) or N (Neutral). The engine will not start in any other position. To restart the vehicle when it is already moving, use N (Neutral) only.
Wait at least 15 seconds between each try, to allow the cranking motor to cool. When the engine starts, let go of the key and accelerator. If the vehicle starts briefly but then stops again, repeat the procedure. This clears the extra gasoline from the engine.
The length of time the heater should remain plugged in depends on several factors. Ask a dealer/retailer in the area where you will be parking the vehicle for the best advice on this. Automatic Transmission Operation The shift lever is located on the center console between the front seats.
ease pressure on the shift lever and push the shift lever all the way into P (Park) while maintaining brake application. Then press the shift lever button and move the shift lever into another gear. See Shifting Out of Park on page 8-13 . Notice: Shifting to R (Reverse) while the vehicle is moving forward could damage the transmission.
Sport Shift Mode The automatic transmission has a Sport Shift Mode. When you are in the Sport Shift Mode the vehicle will still shift automatically. The transmission may remain in a gear longer than it would in the normal driving mode based on braking, throttle input, and vehicle lateral acceleration.
While using the DSC mode, the vehicle has firmer shifting and increased performance. This can be used for sport driving or when climbing or descending hills, to stay in gear longer, or to down shift for more power or engine braking.
Manual Transmission Operation This is the shift pattern for the six-speed manual transmission. Here is how to operate the transmission: 1 (First): Press the clutch pedal and shift into 1 (First). Then slowly let up on the clutch pedal as you press the accelerator pedal.
One to Four Shift Light When this light comes on, you can only shift from 1 (First) to 4 (Fourth) instead of 1 (First) to 2 (Second). The light will be displayed on the instrument panel cluster and a message will be displayed in the Driver Information Center.
To release the parking brake: 1. Hold the brake pedal down. 2. Pull the parking brake handle up until you can press the release button. 3. Hold the release button in as you move the brake handle all the way down. Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts.
Leaving Your Vehicle With the Engine Running { CAUTION It can be dangerous to leave the vehicle with the engine running. The vehicle could move suddenly if the shift lever is not fully in P (Park) with the parking brake firmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch fire.
Parking the Vehicle (Manual Transmission) If the vehicle has a manual transmission, before you get out of the vehicle, move the shift lever into R (Reverse), and firmly apply the parking brake.
CAUTION (Continued) • The exhaust system leaks due to corrosion or damage. • The vehicle’s exhaust system has been modified, damaged or improperly repaired. • There are holes or openings in the vehicle body from damage or after-market modifications that are not completely sealed.
Driving Your Vehicle Defensive Driving Defensive driving means “always expect the unexpected.” The first step in driving defensively is to wear your safety belt, see Safety Belts on page 1-5 . { CAUTION Assume that other road users (pedestrians, bicyclists, and other drivers) are going to be careless and make mistakes.
Alcohol affects four things that anyone needs to drive a vehicle: judgment, muscular coordination, vision, and attentiveness. Police records show that almost 40 percent of all motor vehicle-related deaths involve alcohol. In most cases, these deaths are the result of someone who was drinking and driving.
And, of course, actual stopping distances vary greatly with the surface of the road, whether it is pavement or gravel; the condition of the road, whether it is wet, dry, or icy; tire tread; the condition of the brakes; the weight of the vehicle; and the amount of brake force applied.
As you brake, the computer keeps receiving updates on wheel speed and controls braking pressure accordingly. Remember: ABS does not change the time you need to get your foot up to the brake pedal or always decrease stopping distance.
The system may be heard or felt while it is working. This is normal and does not mean there is a problem with the vehicle. When this light and the STABILITY CTRL OFF message is on and the ESP OFF message is displayed, the system will not limit wheel spin.
When this light and the STABILITY CTRL OFF message is on briefly and the ESP OFF message is displayed at the bottom of the DIC, the system will not limit wheel spin. If the ESP OFF message is always displayed at the bottom of the DIC when the button is pressed to turn the system on or off, the system needs repair.
Steering Power Steering If you lose power steering assist because the engine stops or the system is not functioning, you can steer but it will take much more effort.
Of f-Road Recovery Your vehicle’s right wheels can drop off the edge of a road onto the shoulder while driving. If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy. Ease off the accelerator and then, if there is nothing in the way, steer so that your vehicle straddles the edge of the pavement.
In the steering or cornering skid, too much speed or steering in a curve causes tires to slip and lose cornering force. And in the acceleration skid, too much throttle causes the driving wheels to spin. If your vehicle starts to slide, ease your foot off the accelerator pedal and quickly steer the way you want the vehicle to go.
Driving in Rain and on Wet Roads Rain and wet roads can reduce vehicle traction and affect your ability to stop and accelerate. Always drive slower in these types of driving conditions and avoid driving through large puddles and deep-standing or flowing water.
Before Leaving on a Long Trip To prepare your vehicle for a long trip, consider having it serviced by your dealer/retailer before departing. Things to check on your own include: • Windshield Washer .
{ CAUTION Coasting downhill in N (Neutral) or with the ignition off is dangerous. The brakes will have to do all the work of slowing down and they could get so hot that they would not work well. You would then have poor braking or even none going down a hill.
Try not to break the fragile traction. If you accelerate too fast, the drive wheels will spin and polish the surface under the tires even more. The Antilock Brake System (ABS) on page 8-18 improves vehicle stability during hard stops on a slippery roads, but apply the brakes sooner than when on dry pavement.
CAUTION (Continued) • Fully open the air outlets on or under the instrument panel. • Adjust the Climate Control system to a setting that circulates the air inside the vehicle and set the fan speed to the highest setting. See Climate Control System in the Index.
Rocking Your Vehicle to Get It Out Turn the steering wheel left and right to clear the area around the front wheels. Turn off any stability system. Shift back and forth between R (Reverse) and a forward gear, spinning the wheels as little as possible.
Tire and Loading Information Label A vehicle specific Tire and Loading Information label is attached to the vehicle’s center pillar (B-pillar). With the driver’s door open, you will find the label attached near the door lock post.
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, the load from your trailer will be transferred to your vehicle.
A. Vehicle Capacity Weight for Example 3 = 1,000 lbs (453 kg). B. Subtract Occupant Weight 200 lbs (91 kg) × 5 = 1,000 lbs (453 kg). C. Available Cargo Weight = 0 lbs (0 kg). Refer to the vehicle’s Tire and Loading Information label for specific information about the vehicle’s capacity weight and seating positions.
If you put things inside the vehicle — like suitcases, tools, packages, or anything else — they will go as fast as the vehicle goes. If you have to stop or turn quickly, or if there is a crash, they will keep going. { CAUTION Things you put inside the vehicle can strike and injure people in a sudden stop or turn, or in a crash.
Gasoline Octane If the vehicle has a V8 engine, use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, you might notice an audible knocking noise when you drive, commonly referred to as spark knock.
Additives To provide cleaner air, all gasolines in the United States are now required to contain additives that help prevent engine and fuel system deposits from forming, allowing the emission control system to work properly. In most cases, you should not have to add anything to the fuel.
Filling the Tank { CAUTION Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off the engine when you are refueling. Do not smoke if you are near fuel or refueling the vehicle.
The diagnostic system can determine if the fuel cap has been left off or improperly installed. This would allow fuel to evaporate into the atmosphere. See Malfunction Indicator Lamp on page 4-18 . { CAUTION If a fire starts while you are refueling, do not remove the nozzle.
Vehicle Service and Care Service Service .............................. .9-2 Accessories and Modifications .................... .9-3 California Proposition 65 Warning ........................... .9-3 California Perchlorate Materials Requirements ....
Uniform Tire Quality Grading .......................... .9-62 Wheel Alignment and Tire Balance ................... .9-64 Wheel Replacement ......... .9-64 Tire Chains ...................... .9-65 Tire Changing If a Tire Goes Flat ........... .9-66 Tire Sealant and Compressor Kit (V8 Engine) .
Accessories and Modifications When non-dealer/non-retailer accessories are added to the vehicle, they can affect vehicle performance and safety, including such things as airbags, braking, stability, ride and handling, emissions systems, aerodynamics, durability, and electronic systems like antilock brakes, traction control, and stability control.
Doing Your Own Service Work { CAUTION You can be injured and the vehicle could be damaged if you try to do service work on a vehicle without knowing enough about it. • Be sure you have suff icient knowledge, experience, the proper replacement parts, and tools before attempting any vehicle maintenance task.
Owner Checks { CAUTION An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing, and tools away from any underhood electric fan. { CAUTION Things that burn can get on hot engine parts and start a fire.
Engine Compartment Overview When you open the hood, this is what you will see: A. Engine Compartment Fuse Block on page 9-38 . B. Coolant Reservoir and Dipstick. See Cooling System on page 9-13 . C. Engine Oil Fill Cap. See “When to Add Engine Oil” under Engine Oil on page 9-8 .
A. Engine Compartment Fuse Block on page 9-38 . B. Coolant Reservoir and Dipstick. See Cooling System on page 9-13 . C. Engine Oil Dipstick. See “Checking Engine Oil” under Engine Oil on page 9-8 . D. Engine Oil Fill Cap. See “When to Add Oil” under Engine Oil on page 9-8 .
Engine Oil Checking Engine Oil It is a good idea to check the engine oil every time you get fuel. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground. The engine oil dipstick handle is a yellow loop. See Engine Compartment Overview on page 9-6 for the location of the engine oil dipstick.
• GM6094M Use only an oil that meets GM Standard GM6094M. • SAE 5W-30 SAE 5W-30 is best for the vehicle. If you are in an area of extreme cold, where the temperature falls below − 20°F ( − 29°C), use either an SAE 5W-30 synthetic oil or an SAE 0W-30 oil.
Engine Oil Life System When to Change Engine Oil This vehicle has a computer system that lets you know when to change the engine oil and filter. This is based on engine revolutions and engine temperature, and not on mileage. Based on driving conditions, the mileage at which an oil change will be indicated can vary considerably.
What to Do with Used Oil Used engine oil contains certain elements that can be unhealthy for your skin and could even cause cancer. Do not let used oil stay on your skin for very long. Clean your skin and nails with soap and water, or a good hand cleaner.
3. On the V8 engine, remove the airflow sensor connector by pushing in the tab and pulling straight back. 4. Remove the five retaining clips on the air filter housing. 5. Pull straight up on cover, while holding the cover remove the air filter. 6.
Cooling System When you decide it is safe to lift the hood, this is what you see: A. Engine Coolant Reservoir B. Radiator Cap V6 Engine Vehicle Service and Care 9-13.
A. Engine Coolant Reservoir B. Radiator Cap { CAUTION An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury.
{ CAUTION Heater and radiator hoses, and other engine parts, can be very hot. Do not touch them. If you do, you can be burned. Do not run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could be burned.
What to Use { CAUTION Adding only plain water to the cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. The vehicle’s coolant warning system is set for the proper coolant mixture.
Checking Coolant The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant recovery tank. If the coolant inside the coolant recovery tank is boiling, do not do anything else until it cools down.
How to Add Coolant to the Radiator { CAUTION You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. Notice: This vehicle has a specific coolant fill procedure.
If no coolant is visible in the surge tank, add coolant as follows: 1. Check the engine coolant reservoir level and, if required, top with coolant. See Engine Coolant on page 9-15 Engine Coolant. 2. Locate the radiator cap. 3. Cover the cap with a thick cloth and turn it slowly counterclockwise and remove.
Engine Overheating The vehicle has an indicator to warn of engine overheating. There is an engine coolant temperature warning light on your vehicle’s instrument panel. See Engine Coolant Temperature Gage on page 4-17 . You may decide not to lift the hood when this warning appears, but instead get service help right away.
If No Steam Is Coming From The Engine Compartment If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: • Climbs a long hill on a hot day.
3. Wipe the cap and the top of the reservoir clean. 4. Turn the cap counterclockwise and pull it straight up. 5. When the engine is hot, the level should be at the hot MAX level. When the engine is cold, the fluid level should be between MIN and MAX on the dipstick.
Windshield Washer Fluid What to Use When you need windshield washer fluid, be sure to read the manufacturer’s instructions before use. If you will be operating your vehicle in an area where the temperature may fall below freezing, use a fluid that has suff icient protection against freezing.
Windshield Wiper Blade Replacement Front Windshield Wiper Windshield wiper blades should be inspected for wear or cracking. See “Maintenance Replacement Parts” in the Limited Warranty, Maintenance and owner Assistance Information manual for the proper type and length.
Brakes Brake Fluid The brake master cylinder reservoir is filled with DOT-4 brake fluid. There are only two reasons why the brake fluid level in the reservoir might go down: • The brake fluid level goes down because of normal brake lining wear. When new linings are installed, the fluid level goes back up.
What to Add Use only new DOT-4 brake fluid from a sealed container. It is recommended that the brake hydraulic system be flushed and refilled with new DOT-4 fluid at a regular maintenance service every two years. See Additional Required Services on page 11-6 and Recommended Fluids and Lubricants on page 11-12 .
Notice: Continuing to drive with worn-out brake pads could result in costly brake repair. Some driving conditions or climates can cause a brake squeal when the brakes are first applied or lightly applied. This does not mean something is wrong with the brakes.
Battery This vehicle has a maintenance free battery. When it is time for a new battery, see your dealer/retailer for one that has the replacement number shown on the original battery’s label. The battery is located in the trunk behind a trim panel on the driver’s side.
The vehicle should: • Be placed so the headlamps are 25 ft. (7.6 m) from a light colored wall. • Have all four tires on a perfectly level surface which is level all the way to the wall. • Be placed so it is at a right angle to the wall. • Not have any snow, ice, or m u do ni t .
Notice: Do not cover a headlamp to improve beam cut-off when aiming. Covering a headlamp may cause excessive heat build-up which may cause damage to the headlamp. 6. Turn on the low-beam headlamps and place a piece of cardboard or equivalent in front of the headlamp not being adjusted.
Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs on page 9-35 . For any bulb changing procedure not listed in this section, contact your dealer/retailer. Halogen Bulbs { CAUTION Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb.
4. For the driver side remove the clip from the air cleaner/filter cover. Move the cover to the back, out of the way. 5. Turn the dust cap counterclockwise to remove. 6. Press the two prongs together on the connector to remove the wiring harness connector.
10. Reconnect the wiring harness to the bulb socket. 11. Push the bulb socket into the lamp assembly and turn it clockwise to lock it into place. 12. Turn the dust cap clockwise to lock it into place. 13. For the driver side reinstall the air cleaner/filter cover.
Taillamps A. Turn Signal Lamp B. Stoplamp/Taillamp C. Back-up Lamp To replace one of these bulbs: For any lamp not listed here, see your dealer/retailer to replace. 1. Open the trunk. See Trunk on page 2-10 . 2. Raise the spare tire cover. See Removing the Spare Tire and Tools on page 9-76 for more information.
9. Push the new bulb into the socket and turn it clockwise to lock it into place. 10. Push the bulb socket straight in and turn it clockwise to lock it into place. 11. Make sure the seals are applied to the taillamp assembly and screws. 12. Raise the spare tire cover.
Electrical System Add-On Electrical Equipment Notice: Do not add anything electrical to the vehicle unless you check with your dealer/retailer first. Some electrical equipment can damage the vehicle and the damage would not be covered by the vehicle’s warranty.
Fuses Usage F1 Airbag F2 Trunk Release F3 Door Locks F4 Inadvertent Power LED F5 Courtesy/Turn Signal Lamps/Front Passenger Turn Signal F6 Rear and Side Passenger Side Turn Signal F7 Spare F8 Driver S.
Fuses Usage F14 Auxiliary Power F15 Outside Rearview Mirrors F16 Sunroof/Automatic Transmission Shift Lock F17 Sunroof F18 Automatic Occupant Sensor F19 Driver Side Heated Seat F20 Passenger Side Heat.
Fuses Usage FL1 Spare FL2 Rear Defog FL3 ABS Motor FL4 Battery Main 3 FL5 Battery Main 1 FL6 Spare FL7 Battery Main 2 FL8 Starter FL9 HVAC Blower Motor FL10 Fan 1 Engine Cooling (Right) FL11 Spare FL1.
Fuses Usage F10 Driver Side Low-Beam Headlamp F11 Spare F12 Passenger Side Low-Beam Headlamp F13 Spare F14 Spare F15 Front Wiper F16 Spare F17 Theft Horn F18 Spare F19 Passenger Side High-Beam Headlam.
Rear Compartment Fuse Block The rear compartment fuse block is located on the left side of the trunk behind a cover. Use the fuse puller, to remove and replace fuses.
Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your vehicle Warranty booklet for details. { CAUTION Poorly maintained and improperly used tires are dangerous.
(A) Tire Size : The tire size is a combination of letters and numbers used to define a particular tire’s width, height, aspect ratio, construction type, and service description. See the “Tire Size” illustration later in this section for more detail.
(A) Temporary Use Only : The compact spare tire or temporary use tire has a tread life of approximately 3,000 miles (5 000 km) and should not be driven at speeds over 65 mph (105 km/h). The compact spare tire is for emergency use when a regular road tire has lost air and gone flat.
Tire Size The following illustration shows an example of a typical passenger vehicle tire size. (A) Passenger (P-Metric) Tire : The United States version of a metric tire sizing system. The letter P as the first character in the tire size means a passenger vehicle tire engineered to standards set by the U.
Tire Terminology and Definitions Air Pressure : The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kPa). Accessory Weight : This means the combined weight of optional accessories.
GAWR FRT : Gross Axle Weight Rating for the front axle. See Loading the Vehicle on page 8-30 . GAWR RR : Gross Axle Weight Rating for the rear axle. See Loading the Vehicle on page 8-30 . Intended Outboard Sidewall : The side of an asymmetrical tire, that must always face outward when mounted on a vehicle.
Radial Ply Tire : A pneumatic tire in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread. Rim : A metal support for a tire and upon which the tire beads are seated. Sidewall : The portion of a tire between the tread and the bead.
Inflation - Tire Pressure Tires need the correct amount of air pressure to operate effectively. Notice: Do not let anyone tell you that under-inflation or over-inflation is all right.
Tire Size Recommended Cold Tire Inflation Occupant and Cargo Weight: 573 lbs (260 kg) or Less Occupant and Cargo Weight: Up to 917 lbs (416 kg) (Vehicle Capacity Weight) Front Tires Rear Tires Front .
If you overfill the tire, release air by pushing on the metal stem in the center of the tire valve. Recheck the tire pressure with the tire gage. Be sure to put the valve caps back on the valve stems. They help prevent leaks by keeping out dirt and moisture.
Tire Size Recommended Cold Tire Inflation Occupant and Cargo Weight: 573 lbs (260 kg) or Less Occupant and Cargo Weight: Up to 917 lbs (416 kg) (Vehicle Capacity Weight) Front Tires Rear Tires Front .
Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure.
The TPMS operates on a radio frequency and complies with RSS-210 of Industry and Science Canada. Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference received, including interference that may cause undesired operation of the device.
The vehicle’s TPMS system can warn about a low tire pressure condition but it does not replace normal tire maintenance. See Tire Inspection and Rotation on page 9-57 and Tires on page 9-42 . Notice: Using non-approved tire sealants could damage the Tire Pressure Monitor System (TPMS) sensors.
If the TPMS is not functioning it cannot detect or signal a low tire condition. See the dealer/retailer for service if the TPMS malfunction light and DIC message comes on and stays on. TPMS Sensor Matching Process Each TPMS sensor has a unique identification code.
6. The driver side front indicator lamp turns off and the passenger side front indicator lamp comes on to indicate that corner’s sensor is ready to be learned.
Any time you notice unusual wear, rotate the tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels. See When It Is Time for New Tires on page 9-59 and Wheel Replacement on page 9-64 . When rotating the vehicle’s tires, always use the correct rotation pattern shown here.
When It Is Time for New Tires Various factors, such as maintenance, temperatures, driving speeds, vehicle loading, and road conditions influence when you need new tires. One way to tell when it is time for new tires is to check the treadwear indicators, which will appear when the tires have only 1/16 inch (1.
GM’s exclusive TPC Spec system considers over a dozen critical specifications that impact the overall performance of your vehicle, including brake system performance, ride and handling, traction control, and tire pressure monitoring performance. GM’s TPC Spec number is molded onto the tire’s sidewall near the tire size.
Vehicles that have a tire pressure monitoring system could give an inaccurate low-pressure warning if non-TPC Spec rated tires are installed on your vehicle. Non-TPC Spec rated tires may give a low-pressure warning that is higher or lower than the proper warning level you would get with TPC Spec rated tires.
Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A Th.
Traction – AA, A, B, C The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete.
Wheel Alignment and Tire Balance The tires and wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. Adjustments to wheel alignment and tire balancing will not be necessary on a regular basis.
Used Replacement Wheels { CAUTION Putting a used wheel on the vehicle is dangerous. You cannot know how it has been used or how far it has been driven. It could fail suddenly and cause a crash. If you have to replace a wheel, use a new GM original equipment wheel.
Tire Changing If a Tire Goes Flat It is unusual for a tire to blowout while you are driving, especially if you maintain your tires properly. See Tires on page 9-42 .
Tire Sealant and Compressor Kit If your vehicle has a factory installed Tire Sealant and Compressor kit, there is no spare tire, no tire changing equipment and no place to store a tire. If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place and stopping.
The kit includes: A. On/Of f Switch B. Air Compressor Accessory Plug C. Air Compressor D. Sealant Canister E. Sealant/Air Hose F. Air-only Hose G. Pressure Gage Tire Sealant The sealant can temporarily seal a small puncture up to 6 mm in the tread area of the tire.
Do a safety check before proceeding. See If a Tire Goes Flat on page 9-66 . Inspect the damaged tire. The sealant cannot seal sidewall damage, large punctures, or a tire that has unseated from the wheel. See Roadside Assistance Program on page 12-6 . Do not remove any objects that have penetrated the tire.
8. Check the air pressure gage (G). If there is not a pressure reading while the compressor is running, check for leaks at the connection between the tire valve stem and the sealant/air hose (E). 9. Inflate the tire to the recommended inflation pressure, found on the Tire and Loading Information label.
15. If the flat tire was able to be inflated to the recommended inflation pressure, remove the maximum speed label from the sealant canister and place it in a highly visible location. The maximum speed label reminds you to drive cautiously and not to exceed 55 mph (90 km/h) until you have the damaged tire inspected and repaired.
19. Wipe of f any sealant from the wheel, tire or vehicle. 20. Dispose of the used sealant canister at a local dealer/retailer or in accordance with local state codes and practices. After using the sealant canister, replace it with a new canister available from your dealer/retailer.
{ CAUTION Idling the engine in a closed-in place or with the climate control system off can cause deadly carbon monoxide (CO). See Engine Exhaust on page 8-14 . 5. Start the vehicle. The vehicle must be running while using the air compressor. { CAUTION Overinflation could cause the tire to rupture, and you or others could be injured.
Removal and Installation of the Sealant Canister To remove the sealant canister: 1. Unlock the air-only hose from the sealant canister by pulling up on the lever. 2. Pull the air-only hose from the sealant canister. 3. Unwrap the sealant/air hose from the compressor.
Changing a Flat Tire If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. { CAUTION Changing a tire can be dangerous. The vehicle can slip off the jack and roll over or fall on you or other people.
Removing the Spare Tire and Tools Spare Tire The equipment you will need is located in the rear storage area. 1. Open the trunk. See Trunk on page 2-10 . 2. Pull the handle of the spare wheel cover strap straight up and secure to the trunk lid. 3. Turn the retainer nut counterclockwise and remove the spare tire.
Tools A. Jack Handle B. Nut Cap Tool C. Wheel Wrench D. Jack 1. Turn the second retainer nut counterclockwise and remove the panel. 2. Remove the tools from the tool container. 3. Place the tools next to the tire being changed. Removing the Flat Tire and Installing the Spare Tire 1.
Notice: Make sure that the jack lift head is in the correct position or you may damage your vehicle. The repairs would not be covered by your warranty. 3. Position the jack lift head at the jack location nearest the flat tire. The location is indicated by a mark on the bottom edge of the vehicle.
The jack handle must be unfolded at a right angle before it is used. 6. Raise the vehicle by turning the jack handle clockwise 180°. 7. Pull the jack handle towards you. 8. Repeat Steps 7 and 8 until the vehicle is far enough off the ground so there is enough room for the compact spare tire to fit under the vehicle.
{ CAUTION Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When you change a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle.
13. Lower the vehicle by turning the jack handle counterclockwise. Lower the jack completely. 14. Tighten the wheel nuts firmly in a crisscross sequence, as shown. { CAUTION Incorrect or improperly tightened wheel nuts can cause the wheel to come loose and even come off.
Storing a Flat or Spare Tire and Tools { CAUTION Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place.
Compact Spare Tire Although the compact spare tire was fully inflated when the vehicle was new, it can lose air after a time. Check the inflation pressure regularly. It should be 60 psi (420 kPa). After installing the compact spare on the vehicle, stop as soon as possible and make sure the spare tire is correctly inflated.
Jump Starting If the battery has run down, try to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. { CAUTION Batteries can hurt you. They can be dangerous because: • They contain acid that can burn you.
The jump start positive (A) and negative posts (B) are located in the engine compartment on the driver side of the vehicle. These posts are used instead of a direct connection to the battery. The positive jump start connection is covered by a red cap.
Notice: If you leave the radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by the warranty.
6. Connect the other end of the red positive (+) cable to the positive (+) terminal of the good battery (B). 7. Connect one end of the black negative (–) cable to the negative (–) terminal of the good battery (C). 8. Connect the other end of the black negative (–) cable to the negative (–) post (D).
Towing Towing Your Vehicle To avoid damage, the disabled vehicle should be towed with all four wheels off the ground. Consult your dealer/retailer or a professional towing service if the disabled vehicle must be towed. See Roadside Assistance Program on page 12-6 .
6. Press the select button and move the transmission gear selector to the N (Neutral) position (G). 7. Release the lever (F). 8. After the vehicle has been moved, align the shift lock manual release cover plate (D) and install the retainer (E) so the automatic transmission can operate properly.
Successful, safe trailering takes correct equipment, and it has to be used properly. That is the reason for this part. In it are many time-tested, important trailering tips and safety rules. Many of these are important for your safety and that of your passengers.
Weight of the Trailer How heavy can a trailer safely be? It should never weigh more than 2,000 lbs (907 kg). But even that can be too heavy. It depends on how you plan to use your rig. For example, speed, altitude, road grades, outside temperature and how much your vehicle is used to pull a trailer are all important.
Total Weight on Your Vehicle’s Tires Be sure your vehicle’s tires are inflated to the upper limit for cold tires. You will find these numbers on the Tire-Loading Information label. See Loading the Vehicle on page 8-30 . Then be sure you do not go over the GVW limit for your vehicle, including the weight of the trailer tongue.
Driving with a Trailer Towing a trailer requires a certain amount of experience. Before setting out for the open road, you will want to get to know your rig. Acquaint yourself with the feel of handling and braking with the added weight of the trailer.
Turn Signals When Towing a Trailer When you tow a trailer, your vehicle may need a different turn signal flasher and/or extra wiring. Check with your dealer/retailer. The arrows on your instrument panel will flash whenever you signal a turn or lane change.
When You Are Ready to Leave After Parking on a Hill 1. Apply your regular brakes and hold the pedal down while you: • Start your engine. • Shift into a gear. • Release the parking brake. 2. Let up on the brake pedal. 3. Drive slowly until the trailer is clear of the chocks.
When cleaning your vehicle’s interior, only use cleaners specifically designed for the surfaces being cleaned. Permanent damage may result from using cleaners on surfaces for which they were not intended. Use glass cleaner only on glass. Remove any accidental over-spray from other surfaces immediately.
Fabric/Carpet Use a vacuum cleaner with a soft brush attachment frequently to remove dust and loose dirt. A canister vacuum with a beater bar in the nozzle may only be used on floor carpet and carpeted floor mats. For soils, always try to remove them first with plain water or club soda.
Instrument Panel, Vinyl, and Other Plastic Surfaces A soft cloth dampened with water may be used to remove dust. If a more thorough cleaning is necessary, a clean soft cloth dampened with a mild soap solution can be used to gently remove dust and dirt.
Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from industrial chimneys, etc., can damage the vehicle’s finish if they remain on painted surfaces. Wash the vehicle as soon as possible.
Rinse the vehicle well, before washing and after to remove all cleaning agents completely. If they are allowed to dry on the surface, they could stain. Dry the finish with a soft, clean chamois or an all-cotton towel to avoid surface scratches and water spotting.
The surface of these wheels is similar to the painted surface of the vehicle. Do not use strong soaps, chemicals, abrasive polishes, abrasive cleaners, cleaners with acid, or abrasive cleaning brushes on them because you could damage the surface. Do not use chrome polish on aluminum wheels.
Sheet Metal Damage If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection. Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty.
Technical Data Vehicle Identification Vehicle Identification Number (VIN) ................. .10-1 Service Parts Identification Label .......... .10-1 Capacities and Specifications Capacities and Specifications ................. .10-2 Vehicle Identification Vehicle Identification Number (VIN) This is the legal identifier for your vehicle.
Capacities and Specifications Thefollowing approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 11-12 for more information.
Application Capacities English Metric Transmission Fluid Automatic, 5 Speed, 3.6L V6 Engine 9.4 qt 8.9 L Automatic, 6 Speed 6.0L V8 Engine 12.4 qt 11.7 L Manual, 6 Speed 6.0L V8 Engine 3.7 qt 3.5 L Wheel Nut Torque 125 lb ft 170 Y All capacities are approximate.
✍ NOTES 10-4 Technical Data.
Service and Maintenance Service and Maintenance Introduction ...................... .11-1 Maintenance Requirements ................. .11-2 Your Vehicle and the Environment ................... .11-2 Using the Maintenance Schedule ......................
Maintenance Requirements Notice: Maintenance intervals, checks, inspections, replacement parts, and recommended fluids and lubricants as prescribed in this manual are necessary to keep this vehicle in good working condition. Any damage caused by failure to follow scheduled maintenance might not be covered by the vehicle warranty.
{ CAUTION Performing maintenance work on a vehicle can be dangerous. In trying to do some jobs, you can be seriously injured. Do your own maintenance work only if you have the required know-how and the proper tools and equipment for the job. If you have any doubt, see your dealer/retailer to have a qualified technician do the work.
Scheduled Maintenance When the Service Engine Oil message comes on, it means that service is required for your vehicle. Have your vehicle serviced as soon as possible within the next 600 miles (1 000 km).
Scheduled Maintenance Service Maintenance I Maintenance II Change engine oil and filter. See Engine Oil on page 9-8 . Reset oil life system. See Engine Oil Life System on page 9-10 . An Emission Control Service. •• Visually check for any leaks or damage.
Additional Required Services The following services should be performed at the first maintenance service ( I or II ) after the indicated miles (kilometers) shown for each item.
Additional Required Services (cont’d) Service and Miles (Kilometers) 25,000 (40 000) 50,000 (80 000) 75,000 (120 000) 100,000 (160 000) 125,000 (200 000) 150,000 (240 000) Inspect engine accessory drive belt. An Emission Control Service. See footnote (g).
(e) Make sure the safety belt reminder light and safety belt assemblies are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Have any torn or frayed safety belts replaced.
Owner Checks and Services These owner checks and services should be performed at the intervals specified to help ensure vehicle safety, dependability, and emission control performance. Your dealer/ retailer can assist with these checks and services. Be sure any necessary repairs are completed at once.
At Least Once a Year Starter Switch Check { CAUTION When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle.
Parking Brake and Automatic Transmission P (Park) Mechanism Check { CAUTION When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll.
Recommended Fluids and Lubricants Fluids and lubricants identified below by name, part number, or specification can be obtained from your dealer/retailer. Usage Fluid/Lubricant Engine Oil Engine oil which meets GM Standard GM6094M and displays the American Petroleum Institute Certified for Gasoline Engines starburst symbol.
Maintenance Replacement Parts Replacement parts identified below by name, part number or specification can be obtained from your dealer/retailer. Part GM Part Numbers ACDelco Part Numbers Engine Air Cleaner/Filter 92066873 — Engine Oil Filter 3.6L V6 25177917 PF2129 6.
Engine Drive Belt Routing (A) Air Conditioning Compressor V6 Engine V8 Engine 11-14 Service and Maintenance.
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 11-2 . Any additional information from Owner Checks and Services on page 11-9 can be added on the following record pages.
Maintenance Record (cont’d) Date Odometer Reading Serviced By Maintenance I or Maintenance II Services Performed 11-16 Service and Maintenance.
Maintenance Record (cont’d) Date Odometer Reading Serviced By Maintenance I or Maintenance II Services Performed Service and Maintenance 11-17.
Maintenance Record (cont’d) Date Odometer Reading Serviced By Maintenance I or Maintenance II Services Performed 11-18 Service and Maintenance.
Customer Information Customer Information Customer Satisfaction Procedure ...................... .12-1 Online Owner Center ....... .12-3 Customer Assistance for Text Telephone (TTY) Users ............................. .12-4 Customer Assistance Off ices .
STEP TWO: If after contacting a member of dealership management, it appears your concern cannot be resolved by the dealership without further help, in the U.S., call the Pontiac Customer Assistance Center at 1-800-762-2737. In Canada, call General Motors of Canada Customer Communication Centre at 1-800-263-3777 (English) or 1-800-263-7854 (French).
STEP THREE — Canadian Owners: In the event that you do not feel your concerns have been addressed after following the procedure outlined in Steps One and Two, General Motors of Canada Limited wants you to be aware of its participation in a no-charge Mediation/Arbitration Program.
My GM Canada (Canada only) My GM Canada is a password-protected section of gmcanada.com where you can save information on GM vehicles, get personalized offers, and use handy tools and forms with greater ease.
Canada — Customer Assistance General Motors of Canada Limited Customer Communication Centre, CA1-163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 www.
Roadside Assistance Program For U.S. purchased vehicles, call 1-800-ROADSIDE (762-3743); (Text telephone (TTY): 1-888-889-2438) . For Canadian purchased vehicles, call 1-800-268-6800 .
Services Provided • Emergency Fuel Delivery: Delivery of enough fuel for the vehicle to get to the nearest service station. • Lock-Out Service: Service is provided to unlock the vehicle if you are locked out. A remote unlock may be available if you have OnStar ® .
Services Specific to Canadian Purchased Vehicles • Fuel delivery: Reimbursement is approximately $5 Canadian. Diesel fuel delivery may be restricted. Propane and other fuels are not provided through this service. • Lock-Out Service: Vehicle registration is required.
Courtesy Transportation To enhance your ownership experience, we and our participating dealers are proud to offer Courtesy Transportation, a customer support program for vehicles with the Bumper to Bumper (Base Warranty Coverage period in Canada) and extended powertrain warranty in both the U.
Courtesy Rental Vehicle Your dealer may arrange to provide you with a courtesy rental vehicle or reimburse you for a rental vehicle that you obtain if your vehicle is kept for an overnight warranty repair. Rental reimbursement will be limited and must be supported by original receipts.
Recycled original equipment parts may also be used for repair. These parts are typically removed from vehicles that were total losses in prior crashes.
If a Crash Occurs Here is what to do if you are involved in a crash. • Check to make sure that you are all right. If you are uninjured, make sure that no one else in your vehicle, or the other vehicle, is injured. • If there has been an injury, call emergency services for help.
• Choose a reputable collision repair facility for your vehicle. Whether you select a dealer/ retailer or a private collision repair facility to fix the damage, make sure you are comfortable with them. Remember, you will have to feel comfortable with their work for a long time.
Reporting Safety Defects Reporting Safety Defects to the United States Government If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traff ic Safety Administration (NHTSA) in addition to notifying General Motors.
In Canada, call 1-800-263-3777 (English) or 1-800-263-7854 (French), or write: General Motors of Canada Limited Customer Communication Centre, CA1-163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P.
Vehicle Data Recording and Privacy Your GM vehicle has a number of sophisticated computers that record information about the vehicle’s performance and how it is driven.
GM will not access this data or share it with others except: with the consent of the vehicle owner or, if the vehicle is leased, with the consent of the lessee; in response to an off icial request of police or similar government off ice; as part of GM’s defense of litigation through the discovery process; or, as required by law.
✍ NOTES 12-18 Customer Information.
A Accessories and Modifications ...................... 9 - 3 Accessory Power Outlets ........ 4 - 9 Adding Equipment to Y our Airbag-Equipped V ehicle .... 1-32 Additives, Fuel ..................... 8-36 Add-On Electrical Equipment ..................
B Battery ............................... 9-28 Run-Down Protection .......... 5 - 4 Bluetooth ® .......................... 6-25 Brake Fluid ......................... 9-25 Brakes ............................... 9-25 System W arning Light ....... 4-15 Braking .
Customer Assistance Information Courtesy T ransportation ....... 12-4, 12-9 Customer Assistance Off ices ......................... 12-4 Customer Satisfaction Procedure .................... 12-1 GM Mobility Reimbursement Program .......................
Electrical System (cont.) Power Windows and Other Power Options ..... 9-36 Rear Compartment Fuse Block ................... 9-41 Windshield Wiper Fuses .... 9-36 Electronic Stability Program .... 8-19 Engine Air Cleaner/Filter ............... 9-11 Check and Service Engine Soon Lamp .
H Hazard W arning Flashers ........ 4 - 4 Head Restraints ..................... 1 - 4 Headlamp A i m i n g ............................ 9-28 Headlamp Wiring ................. 9-36 Headlamps Bulb Replacement ............. 9-31 Daytime Running Lamp ....
Light (cont.) Brake System W arning ...... 4-15 Charging System .............. 4-15 Daytime Running Lamps Indicator ....................... 4-21 Door Ajar ......................... 4-21 F o g L a m p ........................ 4-20 Highbeam On .........
Online Owner Center ............ 12-3 OnStar , Privacy .................. 12-17 OnStar ® System, see OnStar ® Manual ............... 4-35 Outlet Adjustment .................. 7 - 9 Outlets Accessory Power ................ 4 - 9 Outside Convex Mirror .
Removing the Spare T ire and T ools ........................ 9-76 Replacement Bulbs .............. 9-35 Replacing LA TCH System Parts After a Crash ........... 1-47 Reporting Safety Defects Canadian Government ..... 12-14 General Motors ..............
Spare T ire Compact ......................... 9-83 Installing .......................... 9-77 Removing ........................ 9-76 Storing ............................ 9-82 Specifications, Capacities ...... 10-2 Speedometer ....................... 4-12 Start V ehicle, Remote .
T owing Recreational V ehicle .......... 9-89 T owing a Trailer ................ 9-89 Y our V ehicle ..................... 9-88 T ransmission Operation, Automatic .......................... 8 - 6 T ransmission Operation, Manual .......................
Een belangrijk punt na aankoop van elk apparaat Pontiac g8 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pontiac g8 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pontiac g8 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pontiac g8 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pontiac g8 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pontiac g8 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pontiac g8 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pontiac g8 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
