Gebruiksaanwijzing /service van het product TP-5800 van de fabrikant POSIFLEX Business Machines
Ga naar pagina of 28
WORK STATION Rev. : Original Jiva SL & Jiva EL (TP - 5700/5800) SERIES USER’S MANUAL SL EL.
P/N: 16280900010 SOME IMPORTANT NOTES FCC NOTES This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radi o communications.
i TABLE OF CONTENTS BRIEF INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 THE USER’S MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 THE PRODUCT . . . . . . . . . . . . . . . . . . .
ii WALL MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 6 LOCATION FOR INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . 3 - 6 OPERATING SYSTEM RECOVERY . . . . . . . . . . . . . . . . . . . . . 3 - 7 USING THE TOUCH POS .
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 1 - 1 BRIEF INTRODUCTION THE USER ’ S MANUAL The purpose of this manual is to guide the user in the initial installation and general use of the Posiflex fully integrated compact touch interface workstation .
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 1 - 2 STANDARD FEATURES a) CPU: Celeron compatible 400 MHz up b) HDD: available for fat client models c) Support Win98, Win2000 in fat client models.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 1 - 3 12. one CR port for control over 2 cash drawers max. 13. audio ports (1 Microphone input and 1 audio line output) n) Touch control functions :.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 1 - 4.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 1 PARTS IDENTIFICATION FRONT VIEW The se curity device and top mount LCD customer display are options to both 12” and 15” models. The LED in the logo area serves for several purposes through giving different indication of steady/flashing green/blue light.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 2 SIDE VIEWS Right Side View Left Side View Lock/Release Lever Push In This Direction To Adjust The Tilt Angle Of The Display Panel Latch Hole F.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 3 REAR VIEW REAR VIEW OF MAIN UNIT Lock/Release Button To Detach The Main Unit Optional Security Devices Lock/ Release Lever Cable Exit Service .
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 4 ADJUSTABLE STAND ASSEMBLY BOTTOM OF STAND ASSEMBLY Base Matching Holes Stand Lock/Release Lever Lock/Release Button For Main Unit Cable Exit C.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 5 CONNECTORS Locations of I/O Ports in original revision: Pull The Cable Cover Out In This Direction Turn Counterclockwise Then Take Out The Lat.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 6.
Jiva SL & Jiva EL (TP5700/ 5800) USER’S MANUAL 3 - 1 INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make certain that the system is turned off.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 3 - 2 Adjustable Stand Lock/Release Lever 2 Sets of 4 Matching Holes PREPARING STAND ASSEMBLY Take the adjustable stand assembly and turn it up side down to show the bottom of the base.
Jiva SL & Jiva EL (TP5700/ 5800) USER’S MANUAL 3 - 3 INSTALLING UPS BATTERY Place the optional UPS battery in the battery compartment (shown top left). Screw on the battery cover and route the battery cable through the base. Please enable the UPS features in the software settings before use.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 3 - 4 This battery socket acc epts a 3 V button cell Lithium battery (CR2032) required to support the system real time clock. The jumpers in this window are designated for COM port power supply function.
Jiva SL & Jiva EL (TP5700/ 5800) USER’S MANUAL 3 - 5 OPENING CABLE COVER Insert the tip of the latchkey into a latch hole on one side near bottom of t he main unit. Turn this key counterclockwise to the end. Do the same on the opposite side. Be sure to take the key out of the hole.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 3 - 6 both sides to secure the cable cover on the main unit. Adjust the tilt ang le of the main unit for best viewing effect in the application. CAUTION: On doing any insertion or extraction of any connector, please always hold the connector head itself instead of pulling on the cable wire.
Jiva SL & Jiva EL (TP5700/ 5800) USER’S MANUAL 3 - 7 consideration. If the main unit is tilted to near vertical position, the total height can be either 360 mm or 380 mm depending on the position adjusted. When the main unit is tilted to near horizontal position, the total height requ ired is 275 mm.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 3 - 8.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 4 - 1 USING THE TOUCH POS APPLICATION ENVIRONMENT It is very important that you check the follo wing operational guidelines: Ventilation This terminal must NOT be operated in an environment with restricted ventilation.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 4 - 2 There is an LED in the logo area or under the printed logo for system revision that serves for several purposes.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 4 - 3 Switch Manager” in “Posiflex Tools” in the Program Files helps managing these functions. Software Support The Jiva series provides a software power off command for application program maneuvers.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 4 - 4 through pin 9 after proper jumper setting change. All 4 ports are standard RS232 serial ports. When a serial Modem is to be used in Jiva SL & Jiva EL series, it is most recommended to use COM2 or COM3 port for th is purpose.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 4 - 5 controller, touching any point on the screen surface after touching the right - click sticky button results as a click on the right button of the mouse at that point. However, the right button function is applicable only under the WIN 98 environmen t.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 4 - 6 If, for any reason, the user wants to remove the driver for the RS232 touch controller, please select “Monitor Mouse for Windows 95” in the program list for removal.
Een belangrijk punt na aankoop van elk apparaat POSIFLEX Business Machines TP-5800 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen POSIFLEX Business Machines TP-5800 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens POSIFLEX Business Machines TP-5800 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding POSIFLEX Business Machines TP-5800 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over POSIFLEX Business Machines TP-5800 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van POSIFLEX Business Machines TP-5800 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de POSIFLEX Business Machines TP-5800 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met POSIFLEX Business Machines TP-5800 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
