Gebruiksaanwijzing /service van het product TREADMILL PFTL33105.2 van de fabrikant ProForm
Ga naar pagina of 22
M odel No. PFTL33105.2 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal USER'S MANUAL QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
4 20. When folding or moving the treadmill, make sure that the storage latch is fully closed. 2 1. Inspect and properly tighten all parts of the treadmill regularly.
5 T hank you for selecting the new PROFORM ® 4 95 Pi t readmill. The 495 Pi treadmill combines advanced tech- nology with innovative design to help you get the most from your exercise in the convenience of your home.
ASSEMBL Y To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.
7 2. Orient the Right Upright (36) so that the square hole at t he lower end is oriented as shown. Attach the Right Upright to the Upright Base (48) with two Upright Bolts ( 40) and two Upright Star Washers (39). D o not tighten the Upright Bolts yet.
8 28 18 6. Hold the Console Base (26) near the right Handrail (18). Attach the end of the ground wire on the Console Base to the indicated small hole in the Handrail with a Silver Ground Screw (27). Connect the Wire Harness (28) to wire harness on the Console Base (26).
8. Lower the Uprights (31, 36) until the Handrails (18) are touching the floor. See the lower drawing. Position the Uprights (31, 36) so t hat the treadmill Frame (74) is centered between the Uprights. Firmly tighten the four Upright Bolts (40) and the two Frame Bolts (32).
10 11. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.
OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
12 STEP-BY-STEP CONSOLE OPERATION Note: To prevent damage to the walking platform, always wear clean shoes when using the treadmill. Before operating the console, make sure that the power cord is properly plugged in (see page 11).
13 Follow your progress with the display. A track representing 1/4 mile will appear in the upper right corner o f the display. As you walk or run on the treadm ill, the indicators aro und th e track will appear in succession until the entire track appears.
14 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- m anently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
15 HOW TO LOWER THE TREADMILL FOR USE Hold the treadmill with your right hand as shown. Pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the latch pin. 2. Hold the metal frame firmly with both hands , and lower the treadmill to the floor.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call the toll-free telephone number on the f ront cover of this manual.
17 c. Locate the Reed Switch (63) and the Magnet (67) on the left side of the Pulley (64). Turn the Pulley until t he Magnet is aligned with the Reed Switch. M ake sure that the gap between the Magnet and the R eed Switch is about 1/8”. I f necessary, loosen the Screw (11), move the Reed Switch slightly, and then retighten the Screw.
18 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
19 SUGGESTED STRETCHES T he correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1 . Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
P ART LIST—Model No. PFTL33105.2 R0406A Key No. Qty. Description Key No. Qty. Description 1 2 Foot Rail Cover 2 25 3/4” Screw 3 1 Left Foot Rail 4 8 Foot Rail Screw 5 2 Motor Tension Bolt 6 2 Moto.
36 2 1 5 8 7 6 9 5 6 10 53 52 47 59 58 57 13 1 1 1 1 1 1 14 15 15 16 20 19 17 18 30 2 17 21 22 28 25 2 21 22 20 19 17 17 18 31 35 34 37 38 33 32 35 34 32 33 48 39 40 39 40 37 38 28 27 37 38 45 40 44 4.
LIMITED W ARRANTY ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The drive motor is warranted for three (3) years after the date of purchase. Parts and labor are warranted for ninety (90) days after the date of purchase.
Een belangrijk punt na aankoop van elk apparaat ProForm TREADMILL PFTL33105.2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen ProForm TREADMILL PFTL33105.2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens ProForm TREADMILL PFTL33105.2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding ProForm TREADMILL PFTL33105.2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over ProForm TREADMILL PFTL33105.2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van ProForm TREADMILL PFTL33105.2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de ProForm TREADMILL PFTL33105.2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met ProForm TREADMILL PFTL33105.2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
