Gebruiksaanwijzing /service van het product TSUNAMI MP.11 5012-SUR van de fabrikant Proxim
Ga naar pagina of 24
Quick Install Guide T sunami MP .1 1 Model 5012-SUR V ersion 3.0.1 Part Number: 73226 (CD version) 73227 (Print version).
Page 2 Copyright © 2006 Proxim Wireless NOTICES Copyright Copyright ©2006 Proxim Wireless Corpor ation, San Jose, CA. All rights reserved. Cov ered by one or more of the following U.S . patents: 5,231,634; 5,875,179; 6,006,090; 5,809,060; 6,075,812; 5,077,753.
All rights reserved Page 3 CONTENTS Introduction ................................................................... 4 K ey F eatures ........................................................................................ 4 Package Contents .........
Page 4 Copyright © 2006 Proxim Wireless INTRODUCTION The T sunami MP .11 Model 5012-SUR is a exible wireless outdoor client that let you design solutions for point -to-point links and point-to-multipoint networks. The 5012-SUR is part of the T sunami MP .
All rights reserved Page 5 P ACKAGE CONTENTS Each T sunami 5012-SUR shipment includes the items listed in the following table. V erify that y ou have receiv ed all parts of the shipment.
Page 6 Copyright © 2006 Proxim Wireless HARDW ARE AND SOFTW ARE INST ALLA TION Notes: Be sure to read the Release Notes le on the installation CD as it contains software version and driv er information that may not hav e been av ailable when this document was produced.
All rights reserved Page 7 Step 1: Choose a location T o make optimal use of the unit, you must nd a suitable location for the hardware. The r ange of the unit largely depends upon the position of the integrated antenna. Pro xim recommends you do a site survey , observing the following requirements, before mounting the hardware.
Page 8 Copyright © 2006 Proxim Wireless Step 2: Attach cables Note: Depending on your application and location, you ma y nd it easier to mount the unit before you attach cables to it. If this is the case, remo ve the cable cover (as explained in step 1 below), and then complete Step 3: Mount Unit to Pole .
All rights reserved Page 9 a switch, hub, or patch panel. Use a cross-over Ethernet cable or adapter if y ou are connecting the unit to a single computer or most router ports.
Page 10 Copyright © 2006 Proxim Wireless Step 3: Mount Unit to Pole Mount the 5012-SUR to a pole as follows: Using a screwdriver , turn the screw on the band clamp counter-clockwise until the clamp opens. Place the back of the 5012-SUR against the pole such that the pole ts into the curved portion of the unit.
All rights reserved Page 1 1 Repeat procedure to attach other band clamp through bottom opening in the 5012-SUR unit. Note: Do not fully tighten band clamps; you must rst ensure a functional link to the BSU (Step 4: View LEDs/Adjust Mounting).
Page 12 Copyright © 2006 Proxim Wireless Step 4: V iew LEDs/Adjust Mounting LEDs are located in the cable compartment. When the unit is powered on, the 5012-SUR performs startup diagnostics. When startup is completed, the LEDs show the oper ational state of the 5012- SUR.
All rights reserved Page 13 Step 5: Close Cable Compartment Ensure that the Ethernet cable is properly routed and exiting the unit through the notch at the bottom of the cable compartment.
Page 14 Copyright © 2006 Proxim Wireless The assembly with the cable cover attached is shown below ..
All rights reserved Page 15 Step 6: T ighten Band Clamps Using a 5/16” nutdriver or a screwdriver , fully tighten both band clamps (maximum torque 50 kg-cm/3.6 lbf -ft). Secure Ethernet cable to the pole with cable ties. Provide some slack between the unit and the rst cable tie, which should be within 12 inches of the unit.
Page 16 Copyright © 2006 Proxim Wireless Step 7: Install Documentation and Software Place the CD in a CD-ROM drive. The installer normally starts automatically . (If the installation program does not start automatically , click setup.exe on the installation CD .
All rights reserved Page 17 INITIALIZA TION Connecting to the unit requires either: A direct physical connection with an Ethernet cable or with a serial RS-232 cable A network connection Connecting with the Ethernet cable allows you to use of the W eb Interface and SNMP in addition to the CLI.
Page 18 Copyright © 2006 Proxim Wireless Select the unit for which you want to set the IP address and click Change . The Change dialog window is displayed. T o set the IP address manually , ensure that Static is selected as the IP Address Type and ll in the IP Address and Subnet Mask suitable for the LAN subnet to which the unit is connected.
All rights reserved Page 19 Accessing the W eb Browser T o access the unit with a W eb browser: Start your W eb browser and enter the IP address of the unit in the Address box. The W eb address should appear as http://<ip address> (for example, http://10.
Page 20 Copyright © 2006 Proxim Wireless Accessing the Command Line Interface Ethernet Port T o use the CLI through the Ethernet port, you must have a telnet progr am, the CLI password, and the unit’ s IP address. T o access the unit through Ethernet on a Windows PC: Open a DOS command window: from the Windows Start menu, select Run ; enter cmd.
All rights reserved Page 21 DEF AUL T SETTINGS Setting Default Mode of Operation Bridge Routing Disabled IP Address Assignment Static IP Address 10.0.0.1 Subnet Mask 255.255.255.0 Default R outer IP Address 10.0.0.1 Default T TL 64 RIPv2 (if in routing Mode) Enabled Base Station System Name <blank> Network Name OR_WORP Frequency Channel Chnl.
Page 22 Copyright © 2006 Proxim Wireless Setting Default Multi-Frame Bursting Enabled Storm Threshold Broadcast/Multicast Unlimited Broadcast Protocol Filtering All Protocols Allowed Dynamic Data Rat.
All rights reserved Page 23 TECHNICAL SER VICES AND SUPPORT If you are having trouble utilizing y our Proxim product, please review the Tsunami MP.11 5012-SUR Installation and Management Guide and the additional documentation provided with your product.
www .proxim.com 2115 O’Nel Drive San Jose, CA (408) 731-2700.
Een belangrijk punt na aankoop van elk apparaat Proxim TSUNAMI MP.11 5012-SUR (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Proxim TSUNAMI MP.11 5012-SUR heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Proxim TSUNAMI MP.11 5012-SUR vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Proxim TSUNAMI MP.11 5012-SUR leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Proxim TSUNAMI MP.11 5012-SUR krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Proxim TSUNAMI MP.11 5012-SUR bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Proxim TSUNAMI MP.11 5012-SUR kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Proxim TSUNAMI MP.11 5012-SUR . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
