Gebruiksaanwijzing /service van het product 43-3801 van de fabrikant Radio Shack
Ga naar pagina of 24
43-3801 Owner’s Manual Please read before using this equi pment. A Digital Telephone Answering System 43-3801a.fm Page 1 Monday, Feb ruary 25, 2002 8:56 AM.
2 Your system is ETL listed to UL standards and meets all applicable FCC standards. WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK.
3 Contents ˆ Contents Introduction ............. ......................... ....................... .............. 4 Installation ............... ......................... .......................... ........... 6 Installing the Backup Battery ........
4 Introduction ˆ Introduction Thank you for p urchasing the Radio Shack Digital Telepho ne Answering System. Your system is a sophisticated, fully digital message center. Fully digital me ans th e system stores all messages on a compu ter chip. This gives you advanced capabilities ov er a tape-based answerin g machine.
5 Introduction Voice Activa ted Recording (VOX) Detect ion — the system stops recording w hen the caller hang s up or after 7 se conds of silence to help conserve memory space. Remote Operation — l ets you use a touch -tone phone (or rotary phone and pocket tone dialer) to operate the system while you are away from your home or office.
6 Installation If you use more than o ne phone or other de vice on the li ne, add up all the RENs. If the total is more than five (or three in rural areas), your phone might not ring and your system might not answer. If ringer operation is impaired, remove a devi ce from the line.
7 Installation Cautions: • T o avoid losing stored information, be sure the AC adapter is plugged into an AC outl et before you repla ce the battery . • If you do not plan to use the system with batteries for a month or longer , remove the batteries.
8 Preparation 1. Plug the system’s modular phone line cord into the wall jack. 2. Plug the modular phone line cord (n ot suppli ed) from your telephone into the modular phone jack on the ba ck of the system. CONNECTING AC POWER Plug the AC adapter into a standard AC outlet.
9 Preparation When the MESSAGE indicator lights continuously, the system is ready to answer calls. To turn off the system, press ST OP/ON/OFF . The MESSAGE indicator turns off and the system beeps. You can also turn on the system remotely (see “Setting the System to Answer Calls” on Page 12).
10 Preparation 4. Repeatedly press or hold down MINUTE/TWO WA Y until you hear the correct minute. Note: When you hold do wn MINUTE/TWO W A Y , the sys tem moves forward in 10 minute inte rvals until it reaches 00. 5. Release TIME/SKIP . The system announces the day and time you set.
11 Preparation 1. Hold down HOUR/A NNOUNCE . The system beeps. 2. Speak clearly into the microphone from abo ut 10 inches in front of the system. The MESSAGE indicator flashes. 3. When you finish your message, release HOUR/ANNOUNCE . The system sounds a tone and automatically plays back your recorded message.
12 Operation 4 – The system answers after four rings. 7 – The system answers after seven rings. TS (T oll Saver) – If there are new messages, the system answers after two rings. Otherwise, the system answers after four rings. This lets you avoid unnecessary charges when calling by l ong distance to check your messages.
13 Operation outgoing message or recording an i ncoming message and resets to answer another call. Notes: • If the system’ s memory is full, it answers calls after 10 rings. The caller hears “No one is available to take your call,” the system sounds a beep, and the call er cannot leave a message.
14 Operation To record a message, slide INCOMING MSG to ANN ON L Y , then hold down HOUR/ANNOUNCE . After the beep, spe ak clearly into the microphone from about 10 inches in front of the system. (The message can be about 30 seconds long.) Rele ase HOUR/ ANNOUNCE to stop recording.
15 Operation SCREENING CALLS To screen your calls, let the system answer. Listen to the caller’s message through the system’s speaker. If you decide to answer the call, pi ck up any phon e connected to the same phone line as the system. The system stops rec o rding and resets to answer the next call.
16 Operation RECORDING A T WO-WAY PHONE CONVERSATION You can record both sides of a conversation on any phone connected to the same phone line as the system. At any time during the conversation , press MINUTE/TWO W A Y . After a beep, the system starts recording.
17 Operation Note: If there are no messages, the system beeps. To replay the messages, press PL A Y /P AUSE . To pause while listening to messages, press PLA Y/P AUSE . The playback resumes when you press PL A Y/P AUSE again. The system returns to the answer-ready mode after 7 se conds if you do not press PLA Y/P AUSE again.
18 Remote Operation Note: If you press DELETE before playback of all messages, the system sounds tones to alert you. You cannot delete all messages until you playback all new messages.
19 Remote Operation system continues to play the messages, the caller hears a busy signal. We recommend that you exit remote access using th e appropriate remote command until the system beeps once before you hang up. OPERATING THE SYSTEM FROM A REMOTE LOCATION 1.
20 Troubleshooting REMOTE COMMANDS ˆ T roubleshooting We do not expect you to have any problems with your system, but if you do, try these suggestions. If the system still does not Press T o 1# Play new messages. 2# Play all messages. 3# Delete current message.
21 Troubleshooting operate properly, take it to your local RadioSh ack store for assistance. CARE Keep the system dry; if it gets wet, wipe it dry immediately. Use and store the system only in normal temperature environments. Problem Remedy The system does not answer calls.
22 Troubleshooting Handle the system carefully; do not drop it. Keep the system away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. Modifying or tampering with the system’s internal components can cause a malfunctio n and might in validate its warranty and void your FCC authorization to operate it.
23 Troubleshooting • Increase the distance between the equipment and the radio or TV . • Use outlets on different electrical circuits for the eq uipment and the radio or TV .
02A02 43-3801 Printed in China A Limited One-Y ear W arranty This pro duct is w arranted by RadioShack agai nst manufacturi ng defects in ma- terial and wor kmanship under nor mal use for one (1) year from the d ate of pur - chase from Radio Shack company- owned stores a nd authorized Ra dioShack franchisees and dealers.
Een belangrijk punt na aankoop van elk apparaat Radio Shack 43-3801 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Radio Shack 43-3801 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Radio Shack 43-3801 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Radio Shack 43-3801 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Radio Shack 43-3801 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Radio Shack 43-3801 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Radio Shack 43-3801 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Radio Shack 43-3801 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
