Gebruiksaanwijzing /service van het product A60 van de fabrikant Raymarine
Ga naar pagina of 110
A60 Dual Function Display Owner’ s Handbook Document number: 81295-1 Date: December 2006 81295.book Page 1 Wednesday, December 20, 2006 2:48 PM.
T rademarks and r egistered tr ademarks Raymarine is a registered trademark of R aymarine plc. Navionics is a registered trademark of Navionics SpA. SanDisk is a registered trademark of SanDisk Corporation. Microsoft and Windows are register ed trademarks of Micr osoft Corpor ation.
3 Contents T rademarks and registered tra demarks ...... ................ ................ ...... 2 Important Information ............... .............. ............ .............. ........... .............. ....... 7 Intended Use ................ ...
4 A60 Dual Function Display 2.6 Chart Setup Menu ........ ................ ................ ................ ............... ....... 27 Chart Setup ............... ............ ................ ................ ................ ............. 29 2.7 F ishfinder Setup .
5 3.5 Editing a W aypoint ...... ................ ................ ............. ................ .......... 57 Change the Default Symb ol ........... ................ ................ ................ .... 57 Changing the Waypoint Symbol ............
6 A60 Dual Function Display T o start tracking.. . ..... ................ ................ ............ ................ .......... 86 T o stop tracking. .. ........ ................ ............. ................ ............... ....... 86 Creating a Route from a T rack .
7 Important Information Intended Use T he A60 is a GP S Chartplotter display u nit that can be upgrad ed to include optional Fishfinder function ality . T his handbook contains im portant information on the op eration of your A60. T o get the best results in operat ion and perfor mance , pl ease tak e the time to read it thoroughly .
8 A60 Dual Function Display Electr onic Chart Cards T o use your A60 d isplay as a navi gation aid, electronic ch arts with the appropriate level of detail for the geog raphic area you wish to navigate a re required.
9 Chapter 1: Using the Display T he A60 is a GP S Chartplotter display u nit that can be upgrad ed to include fishfinder capabilities. T he A6 0 comes equipped with a 5.
10 A60 Dual Function Display Note: The A60 sets its internal clock from the GPS. Therefore, time of day is not available until a GPS fix is acquired. After this initial fix, the A60 continues t o update its internally stored time of day, even if GPS fix is lost.
Chapter 1: Using the Display 11 1.2 The Contr ols PA G E ACTIVE DA T A MENU WPTS MOB CANCEL PWR ENTER RANGE DATA MENU Press to access the Setup Menu. CANCEL Press to quit the selected on-screen option when editing data. Also used to return to the previous soft k ey or menu level.
12 A60 Dual Function Display 1.3 Selecting How the Applications are Displayed Each A60 applicat ion (Chart, F ishfi nder) is displ ayed in a separ ate page . In turn, these pages can be split in to 2 side-by- side windo ws .T he settings you choose are saved so that each time you o pen an application it is prese nted in the same way .
Chapter 1: Using the Display 13 Using the chartplotter you can carry out such functions as: • Monitor the course o f your vessel on the ch art as you travel to a destination • View detailed cartog.
14 A60 Dual Function Display Fishfinder P age T his function requ ires that you have in stalled the opti onal DSM25 Digita l Sounder Module . T he fishfinder applicatio n gives you a detail ed view of what is below your vessel. T his includes the seabed and its te xture , fish, and other underwater objects .
Chapter 1: Using the Display 15 Data P ages T he A60 can also display v a rious Data pages as split wi ndows alongside th e chart and fishfinder applic ations . T he following soft k eys appear when the Chart and F ishfinder pages are se lected, respectively: Press the appropriat e soft k ey to select the desired data sp lit screen .
16 A60 Dual Function Display Te m p G r a p h T he T emp Graph P age displays a graph plotting water temperature re adings from the transducer over the past 60 minutes as well as current w ater temper.
Chapter 1: Using the Display 17 Selecting a Split Window When the selected page has a split window , the window that is currently active is bordered in red and the soft k ey o ptions for tha t application are disp layed.
18 A60 Dual Function Display 1.4 The Simulator T he A60 display includes a simulator mode , with which you ca n practice operating your display with out data from a GPS an tenna or a DSM.
Chapter 1: Using the Display 19 T o place your simu lated boat at a specific ge ographic loca tion on the chart in Simulation mo de: 1. Make sure Simulator mode is set OFF . 2. Place you r cursor at the de sired location. 3. Switch Simula tor mode ON.
20 A60 Dual Function Display 81295.book Page 20 Wednes day, December 20, 2006 2:48 PM.
21 Chapter 2: Gener al Oper ation and System Setup 2.1 Intr oduction T his chapter gives details of the general operat ion of the A60 display a nd covers the followi ng subjects: • Using the co ntro.
22 A60 Dual Function Display ACT I VE When a split window page is displayed, press to selec t which window you wish to work from. T he selected window is outlined in red a nd associated soft k ey labels a re displayed. WPTS/MOB Press to display the W aypoints soft keys .
Chapter 2: General Operation and Syst em Setup 23 Soft Keys T here are five soft k eys in the bar below the display screen. When a system function k e y is pressed, the pri mary soft k eys for that functi on are shown.
24 A60 Dual Function Display • TIMED , obje ct data and cursor position information are displayed for three seconds and then disappear • OFF , object data and cursor position info rmation are not displ ayed 2.3 Status Bar T he Status Bar provides current info rmation about the ch art application.
Chapter 2: General Operation and Syst em Setup 25 2.4 Displaying Control In formation on the Scr een Information connected with controls is shown on yo ur screen in the followin g way s : •S o f t K e y s • Dialog boxe s • P op-Up messag es • Database li sts Soft Keys T hese are the primary mean s of control of the display .
26 A60 Dual Function Display Database Lists Database lists contai n information tha t have been added to th e display memory , such as lists provided for w aypoints , tr acks and routes. Y ou ca n scroll through a database list using the trackpad to highlight a partic ular entry .
Chapter 2: General Operation and Syst em Setup 27 • User Card Setu p 2. Use the trackpad or the rotary knob to highlight the menu items you wish to access . When you first po wer on your disp lay the default v alue s are used. T he tab les in following section s show the sub-menus, default settings and options available.
28 A60 Dual Function Display 3. Press the trackpad (right) to sel ect this item. T he menu changes to show you the available options. 4. Use the trackpad or th e rotary knob to change the valu e of the field. 5. Use the trackpad or th e rotary knob to change the valu e of the field.
Chapter 2: General Operation and Syst em Setup 29 8. Press CANCEL to return to the default scr een . T his may requ ire pressing the ke y m o r e t h a n o n c e.
30 A60 Dual Function Display Navigate to ‘More’ and right-press the tr ackpad to acces s additional sel ections . Safety Contour Areas with depths shallower than the specified v alue are shaded in a different color than th ose areas with depths greater than the specified v alue .
Chapter 2: General Operation and Syst em Setup 31 FUNCTION Description OPTIONS (Default in bold ) Object Information Defines how much in formation appears i n the Object Informatio n pop-up when the cursor is placed over a cartographic object (a nd the Cursor Info setting is active , as described on page 23).
32 A60 Dual Function Display 2.7 Fishfinder Setup T hese setup items are for an optional a DSM25 Digital Sou nder Module . T he F ishfinder Setup menu is described in the DSM25 Handbook. Ve c t o r L e n g t h T he chart length specified for drawing COG and Headi ng vectors .
Chapter 2: General Operation and Syst em Setup 33 2.8 System Setup T hese settings define parameters th at ar e used by the A60 in all applica tions . FUNCTION Description OPTIONS (Default in bold ) S.
34 A60 Dual Function Display Settings Reset Returns all settings back to thei r original factory v alues . T he W aypoint and Route List databases ar e not reset. After making this selection, p ress ENTER to accept the reset or CANCEL to quit without r esetting.
Chapter 2: General Operation and Syst em Setup 35 Units... Set the units for speed, depth, and temperature that are used to display all data, including i nformation received from other instruments o n the system. Note: The A60 sets its internal clock from the GPS.
36 A60 Dual Function Display 2.9 Alarm Setup Menu Y ou receive warnings of hazards via built-in al arms that are generated for each application. If an alarm is generated, it soun ds an audible warning and displa ys a message box on screen that explains t he cause of the alarm.
Chapter 2: General Operation and Syst em Setup 37 Fishfinder Alarms Setup T hese setup items are pertinent only if you have a DSM25 Digital S ounder Module installed and connected. Fishfinder Alar ms Setup options are descri bed in the DSM25 Handbook.
38 A60 Dual Function Display T his screen provides , for each tracked satellite , the satellite number , a graphical signal strength bar , status , azimuth angle and its elevation angle from your vessel. T he sky view graphic shows the position of these satellites.
Chapter 2: General Operation and Syst em Setup 39 2.11 Display Setup T hese options control the appe arance o f your A60 Displa y . Brightness Use the trackpad (left/righ t) k eys or rota ry knob to select the brightness value from a low of 5% to a high of 100% in 5% increments .
40 A60 Dual Function Display • SOG Current spee d over ground . • Time Current time of day . • Date Current date . • Auto Scroll Scrolls each data item that has been tu rned ON one-at-a time in the upper left corner of the screen every three seconds .
Chapter 2: General Operation and Syst em Setup 41 Compass direction s (N , NE, NW , etc.) have a superscript character that represents the bearing mode you selecte d in System Set Up: M for Magnetic and T for T rue . 2.12 System Diagnostics T his sub-menu is for diagnostic use b y authorized dealers .
42 A60 Dual Function Display WARN IN G: Improper use of this setting may cause l oss of data or damage to the card. Ensur e you have r ead the instructions on page 42 thorou ghly before attempting to r emove or insert a CF card.
Chapter 2: General Operation and Syst em Setup 43 Inserting a CF Card T o insert a card, refer to the illustration, and: 1. Check that you are using the correct type of card. Refer t o Important Infor ma- tion section of this handbook. 2. Open the chart card door , located on the front left of the display .
44 A60 Dual Function Display Removing a CF Card 1. Press MENU . 2. Navig ate to User Ca rd Menu and se lect “Remov e User Card”. A message appears that it is safe for yo u to remove the card. 3. Open the chart card door . Grip the card and pull to remove it from its slot.
Chapter 2: General Operation and Syst em Setup 45 When navigation is a ctive , you can a lso receive waypoints from other NMEA instruments if you want to save them on your unit. Save Information to a CompactFlash Card 1. Insert a CF ca rd into the card slot.
46 A60 Dual Function Display Note: The save can take as long as o ne minute to complete. This is because a 1MB file is always saved to the card, despite the number of waypoints, routes and tracks you are saving . When the save is complete, a new message box appears.
Chapter 2: General Operation and Syst em Setup 47 3. Press the appropriat e soft key , SEND or RECEIV E ON NMEA. The transfer sta rts and the SEND/RE CEIVE soft k eys ar e grayed out. If you wish to stop the transfer at an y point, press STOP T RA NS FER .
48 A60 Dual Function Display 81295.book Page 48 Wednes day, December 20, 2006 2:48 PM.
49 Chapter 3: W orking with W aypoints 3.1 Intr oduction W aypoints are a core feature of the A6 0 display . T hey can be created in the Ch art or F ishfinder application and used by each application. Waypoints can be stored in the system, archived to a Compa ctFlash card or sent to or recei ved from anot her NMEA compatible i nstrument.
50 A60 Dual Function Display T he details of all waypoints , irrespective of th e application th ey were created in, are stored in a dedicated Waypoint List.
Chapter 3: Working with W aypoints 51 3.2 Placing a W ayp oint A wa ypoint can be pl aced at the cu rsor position, the boat’ s position or at a position of your choosing (using la t/long coordi nates). All w aypoints can also be used in the creation of routes .
52 A60 Dual Function Display • T he Edit W aypoint box i s displayed, enabling you t o change w aypoint details . F or more information refer to “Editing a W aypoint“ on page 57. 3. T o accept t he default de tails press ENTER . T he W a ypoint List appears , dis- playing your newly created waypoint.
Chapter 3: Working with W aypoints 53 3.3 Navigating to a W aypoint (GO T O) Y ou can navigate to an existing waypoint using the GO T O WP T OPTIONS soft key . T his can either be accessed by selecting the desired waypoint on screen with the cursor or via the WPTS/MOB key.
54 A60 Dual Function Display 5. When you arrive at the target w ayp oint an alarm sounds and a warning mes- sage is displ ayed. T o de-activ ate th is alarm, p ress any k ey . 6. T o set the cross t rack error (XTE) to ze ro an d move the origin to the actual ves- sel position press REST AR T XTE.
Chapter 3: Working with W aypoints 55 On the sending device: 1. Ensure th e unit is powered on and connecte d to the A60’s NMEA port via a suitable cable. 2. Select the desired waypoint and export it via the NMEA port. On the A60: 3. Press GO T O . T he GOT O NMEA soft k ey is grayed out until the w aypoint is received.
56 A60 Dual Function Display ... using the waypoint list T he W aypoint List shows all the waypoints that have been placed and disp lays details of the se lected w aypoint. 1. Press WPTS/MOB . 2. Press REV & EDIT WA YPOINTS . T h e W aypoint List is displayed.
Chapter 3: Working with W aypoints 57 3.5 Editing a W aypoint After a w aypoint has been placed it can be edited in a v ariet y of w ays . Y ou can: • Change the default w aypoi nt symbols • Chang.
58 A60 Dual Function Display 3. Use the trackpad or rot ary knob to highlight the waypoint yo u wish to change . Note: Alternatively, you can select a waypoint by placing t he cursor over it. The cursor turns red and the Wayp oint soft keys appear. D9802-1 Waypoint List N 26 15.
Chapter 3: Working with W aypoints 59 4. P re ss EDIT WA YPOINT . T he Ed it W a yp oint box and associ ated soft k eys appear . 5. Press the SYMBOL soft key . The symbol field is highlighted and the available waypoint symbols appear . 6. Use the trackpad (up/down) or rotary knob to highlight the new symbol.
60 A60 Dual Function Display T o change a waypoint’ s Name , Lat/Long info or Co mment: 1. Navigate to the Edit W aypoi nt box for the desi red wayp oint, as describe d in the previous section. The associated soft k eys appear . 2. Press NAME. An edit box appears wit h the firs t character hi ghlighted in the field.
Chapter 3: Working with W aypoints 61 6. Continue in th is manner unt il the ent ire Name f ield is comp lete . Y ou can use up to 16 characters, including spaces. 7. Press the ENTER k e y to save the change . T he new name appears in the Edit Wa y p o i n t b o x .
62 A60 Dual Function Display ... by dragging the wayp oint to a new position Y ou can drag a waypoin t to a new position using the cursor and tr ackpad: 1. Place the cursor over the w aypoint that you want to move . T he W aypoint soft k eys appear . 2.
Chapter 3: Working with W aypoints 63 ... using the cursor 1. Move the cursor over the waypoi nt that you w ant to erase . T he W aypoint soft k eys appear . 2. Pr es s ERASE W A YPOINT . 3. Y ou will then be ask ed to confirm this . If t he wa yp oin t i s pa rt of a ro ut e, a warning message also appears .
64 A60 Dual Function Display 3. T oggle WA YPOINTS between SHOW or HIDE. 4. T oggle WA YPO INT NAME between ON or OFF . D9822-1 SHOW/HIDE WAYPOINTS . .
65 Chapter 4: Using the Chartplotter 4.1 Intr oduction T his chapter describes how to use the Chartplotter applicatio n of the A60 display . T o access full functi onality your chartplotter requires po sition data from your RS12 GPS Sensor .
66 A60 Dual Function Display CAUTION: Navigation Aid The equipment should not be used as a substitute for good navigational pr actice nor for official government paper charts . Do not use the chartplotter before you have r ead the Important Information section at the beginning of this handbook.
Chapter 4: Using the Chartpl otter 67 4.3 What is Displayed T he chartplotter has a buil t in world map. Most areas are displa yed at a scale of 72 nm from the top to th e bottom of the sc reen and can be over zoomed as desired.
68 A60 Dual Function Display 4.4 The Chartplotter Display T he chartplotter includes features that en able you to interpret your surroundings and mak e informed decisions based on your lo cation.
Chapter 4: Using the Chartpl otter 69 Find Ship Y our boat is represented on screen by a ship symbol. If yo u cannot see your boa t (it has travelled off-screen), press FI ND SH IP . The chart is redrawn with your boat and the cursor in the center of the screen.
70 A60 Dual Function Display 3. If you desir e more detailed infor mation, press ENTER . T he Object Info box is re-displayed gi ving further details relati ng to the selected o bject. 4. In the left-h and box, high light the desire d subject area for the object you have selected.
Chapter 4: Using the Chartpl otter 71 4. Use the trackpad to sele ct the desired catego ry . 5. Press FIND . T he nearest ob jects to the cu rsor in the selected category are dis- played. 6. Y ou can now use t he soft k eys to: • Display de tailed data for any of the listed objects .
72 A60 Dual Function Display 4.5 Moving around the Chart T o move aroun d the chart a nd display th e area at th e appropri ate scale , use a combinat ion of zoomi ng and pann ing. P anning P anning moves the chart that is displayed to a different area.
Chapter 4: Using the Chartpl otter 73 4.6 Navigating to a Specific Po int Y ou can use your C hartplotter to navigate to a specific point m ark ed by the cursor or to a w aypoint. When you are steeri ng manually , you can also use the chartplott er to determin e the bearing o r direction to steer .
74 A60 Dual Function Display 4. When you arrive at the target w ayp oint an alarm sounds and a warning mes- sage is displ ayed. T o de-activ ate th is alarm, p ress any k ey . 5. T o stop navigating to the cursor , press ST OP GO T O . T h e GO T O CURSOR way- point is removed.
Chapter 4: Using the Chartpl otter 75 Go to a W aypoint Y ou can navigate to an existing w aypoi nt by either se lecting the ap propriat e waypoint on screen with the cursor or from the W a ypoint List: ... selected with the cursor T his option navigat es you to the waypoint tha t you select on screen.
76 A60 Dual Function Display 5. When you arrive at the target w ayp oint an alarm sounds and a warning mes- sage is displ ayed. T o de-activ ate th is alarm, p ress any k ey . 6. T o set the cross t rack error (XTE) to ze ro an d move the origin to the actual ves- sel position press REST AR T XTE.
Chapter 4: Using the Chartpl otter 77 4.7 Build and Follow a Route T his section describes ho w to use routes and in cludes the fol lowing: • What is a Rout e? • Building and Sa ving a Route • F.
78 A60 Dual Function Display T he following should be noted: • When a route is being built it is not active and does not affect an y current nav- igation, un til you s elect FOLLOW ROUTE. • Y ou can include a waypoint mor e than once in a route but the same w aypoint cannot be placed con secutively .
Chapter 4: Using the Chartpl otter 79 4. Contin ue entering new waypoint s until your ro ute is complete. 5. T o save the route for later use (and rename it if desired): Press SA VE R OU TE o r ENTER . T he Edit Route dialog box is displayed. Press ENTER to accept the defaults .
80 A60 Dual Function Display 1. Move the cursor over the appro priate waypoint. 2. Press USE T HIS W A YPOI NT to include this w aypoint in the current route . • If you mak e an error when you are buil ding your route and wish to remove the last w aypoin t, press UNDO WA YPO INT .
Chapter 4: Using the Chartpl otter 81 5. T o save the built route for later use (a nd rename it if desired): Press SA VE RO UTE. T o save and immediate ly follow the built rout e: Press FOL LO W Q UI CK RTE .
82 A60 Dual Function Display When you are navigating a route the chart displays the following: • Y our boat’ s heading indicated by a dash ed line between your current position and the target wa ypoint.
Chapter 4: Using the Chartpl otter 83 Using the Route List T his option directs you to th e start of the route that you have selected on the route list and then follows it: 1. Press ROUTES . 2. Press FOLL OW RT E O PTIO NS . T he route list is displayed .
84 A60 Dual Function Display Reverse Route T his option reverses the w aypoint order in the selected r oute and then fol lows it. 1. Press ROUTES . 2. Press FOLLOW RTE OPTIONS . T h e route list is displayed. 3. Select the desired route on the list. 4.
Chapter 4: Using the Chartpl otter 85 4.8 Using T racks A track is an on-screen trail that represen ts the course you have ta k en. T his trail is made up of a series of trac k points that are create d automatically . Y ou can save the track to create a permanent record of where you have been.
86 A60 Dual Function Display Creating a T rack T o start tr acking... Press ST AR T TRACK. A track starts to be laid from the stern of the boat using the minimum number of track points necessary . If the maximum number of 1000 track points is reached, you will be warned.
Chapter 4: Using the Chartpl otter 87 On completion , the new r oute is adde d to the rou te list. It can now be di splayed, edited and erased in the same wa y as other routes in the system. CAUTION: The converted r oute only appr oximates the tr ack fr om which it was created.
88 A60 Dual Function Display Reversing a Route Y ou can reverse the course of a route as follows: 1. Press ROUTES and then FOLLOW RTE OPTIONS . T h e route list and associated soft k eys are shown. 2. Select the appropriate route. 3. Press REVERSE ROUTE.
Chapter 4: Using the Chartpl otter 89 4. Use the trackpad (right) to move control from the left (W aypoint) column to the right (New Route) co lumn. 5. Use the trackpad (up) to move the highlight immediately below wh ere you want the new w aypoint inserted.
90 A60 Dual Function Display 8. Press SA VE ROUTE. T he new leg is incorporated into the route. Note: If you are adding a waypoi nt to an active route (a route th at you are currently fol- lowing), the change do es not take effect until after you have halted the rou te by pressing STOP FOLLOW.
Chapter 4: Using the Chartpl otter 91 Note: If you are removing a waypoint from an active route (a route that you are currently following), the chang e does not take effect un til after you have halted the route by press ing STOP FOLLOW.
92 A60 Dual Function Display 3. Move the cur sor over an exis ting w aypoint and select USE THI S W A Y PO INT to add it to your rou te . —or— Move the cursor to the desired location an d select PLA CE WA YPOINT to cre- ate a new w aypoint for your ro ute .
Chapter 4: Using the Chartpl otter 93 1. Move the cursor over the w aypoint that is to be moved. T he cursor turns red and the action soft k eys appear . Note: If you place the cursor over the waypoint to which you are c urrently navigating (the active waypoint), the STOP FOLLOW so ft key appears in place of t he action keys.
94 A60 Dual Function Display Erasing a Route or T rack Y ou can delete any rou te or track in your system except for the one that you are traveling to . 1. Select the appropriate route or track. 2. Pres s ERASE ROUTE or ERASE TRACK. A warn ing box is displayed asking you whether you w ant to proceed.
Chapter 4: Using the Chartpl otter 95 V ectors are set on and off usi ng the Vector Length option in the Char t Setup men u, as described on page 32. The length of th ese lines is determined by the distance your boat will travel in th e time you have specified (3 mins , 6 mins or infinite) at the current speed.
96 A60 Dual Function Display 4.11 Changing What is Disp layed in the Chart Window T he chart screen can b e tailored to your particular need s . Y ou can: • Change how the chart is oriented (see pag.
Chapter 4: Using the Chartpl otter 97 Course Up (C-UP) In Course Up mode, the chart picture is stabilized and shown with your curren t course over ground (COG) upwards . As your boat’ s COG changes , the ship symbol moves accordingly . If you select a new course , the picture will reset to disp lay the new course upwards .
98 A60 Dual Function Display Hiding the Chart Grid T he display of grid lines on the chart is controlled via the Chart Setup Menu. Hiding W aypoints/W aypoint Information Y ou can show or hide a w aypoint’ s name or the entire waypoint.
Chapter 4: Using the Chartpl otter 99 4.12 P ort Services Y ou can display deta ils of port services either by selecti ng the appropriate port symbol with the cursor or by using the port search option. 1. Place the cursor over the symbol for the desired port.
100 A60 Dual Function Display Search for a P ort T he port search option enables you to lo cate the nearest port and display its available serv ices . 1. Press ENTER anywhere on the screen. The Object I nformation b ox is dis- played. 2. Press FIND NEAREST .
Chapter 4: Using the Chartpl otter 101 3. If multiple ob jects are displayed, use the track pad or rotary knob to high light the desired t ide station .
102 A60 Dual Function Display D9877-1 CURSOR... 2:12pm +2.2ft +4.0ft +3.0ft +2.0ft +1.0ft 12:00 6:00 18:00 CORAL SHOAL CORAL SHOAL PREV. DAY TODAY NEXT DAY Position N 25 39. 100 W 080 09. 399 Position High tide 6:00am +4.3ft Low tide 11:31pm +1.1ft High Tide 18:22pm +4.
103 Appendix: Glossary T erm Meaning °C Degrees Centigrade °F Degrees F arenheit Active Leg In a route , the segment yo u are currently traveling. amp Amperes Auto Automatic Bearing T he compass direction fr om your pos ition to a waypoi nt, measure d to the nearest degree .
104 A60 Dual Function Display Coordinated Universal Ti m e ( U T C ) T he world standa rd for time that tak es into account the addi tion or omission of leap secon ds by atomic clocks each year to compensate for changes in the rotati on of the earth.
Appendix: Glossary 105 Leg One portion of a route , consisting o f starting and destinatio n waypoints . Longitude P osition ea st or west of the prime mer idian, measured in degrees .
106 A60 Dual Function Display TTG T ime T o Go TVG Time V ari able Gain UTC Coordin ated Universa l T ime V ariable Range Mar k er (VRM) Mark ers used in F is hfinder Mode for determining the depth and distance-behind-boat of an object. VRMs consist of a horizo ntal (depth) line and a vert ical (distance-behind-b oat) line .
107 Index A Abbreviations 103 Advan ce wayp oint 36 , 83 Alarm Setup menu 36 Alarms Anchor 36 Arrival 36 Navigation 36 Off T rack 37 W aypoint Adv ance 36 Anchor Alarm 36 Arrival Alarm 36 Auto Scroll .
108 A60 Dual Function Display restart 95 Cursor 23 Cursor Info 23 D Data Items 39 Data k ey 22 , 44 Data transfer 44 Data window 12 Date data item 40 Date units 35 Declutter 71 Depth Contour 30 Depth .
109 P Pa g e 12 P anning 72 Po r t Search 100 Services 99 Po w e r o n / o f f 10 Q Quick Route 82 R Range Rings 32 Relative Motion 97 Reset 34 Reverse Route 84 Routes 77 advance to next wayp oint 83 .
110 A60 Dual Function Display erase 62 MOB 50 navigation to 53 , 54 overview 49 placing at a known positi on 52 at the cursor 51 at the vessel 51 show/hide wayp oints 98 viewing wa ypoint information .
Een belangrijk punt na aankoop van elk apparaat Raymarine A60 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Raymarine A60 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Raymarine A60 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Raymarine A60 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Raymarine A60 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Raymarine A60 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Raymarine A60 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Raymarine A60 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
