Gebruiksaanwijzing /service van het product IP160/060 van de fabrikant RCA
Ga naar pagina of 25
IP160/060 IP Phone.
2 3 Interference Information This device complies with P art 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation.
2 3 3 T able of Contents Getting Started 7 P acking List 7 Setup the base 7 Setup the handset 8 Registration 8 SIP account Conguration 9 Base Web interface 1 0 Get the base IP address 1 0 Input SIP.
4 5 P acking List The following components are included in your package: IP DECT Gateway IP160 DECT Handset Handset Belt Clip Charging Cradle AC Adaptor (6V, 0.5A) for Charging Cradle AC Adaptor (5V, 0.5A) for gateway 1.5M Ethernet Cable (Cat 5) Quick Setup Guide 2 x AAA rechargeable Ni-MH batteries Setup the base 1.
5 The IP address of the base is assigned dynamically by default. Make sure the router’s DHCP server is on. When the base is powered up, the amber led will be amber colored. Once the net- address, the amber led will light up again. Setup the handset Connecting the charging cradle 1.
6 7 Registration On the base: 1. Hold down the page key on the back of the base. 2. After the button is held down for ve seconds, the amber led begins blinking amber and blue. The page key can now be released. The base is now in registration mode. On the handset: 1.
6 7 7 SIP account Conguration The SIP account can be congured through IP DECT base web interface or handset menu. Base Web interface Retrieving the base IP address In order to access the web interface of the base, the IP address is required. This information can be obtained from a properly registered handset.
8 9 Enter display name, user id, password, SIP Server and Outbound Proxy server of the SIP account. Check the Active eld to Enable/Disable. Press the “Save” button to conrm. If the SIP settings are congured correctly , the handset will now be able to make and receive VOIP calls.
8 9 9 Overview Base Functions of registration/paging button on the base. The registration/paging button is located at the right hand side of the gateway .
10 11 Handset Handset key layout Functions of Key on the handset Key Function Left Soft Key P erform the contextual operation as shown on the left side of current display Right Soft Key P erform the c.
10 11 11 Key Function Navigation Right Key When the phone is in idle mode, press this key to show the Ringer volume menu. In talk mode, press this key to open the talk volume menu. Press the navigation up/down key to adjust the volume. OK Key When the phone is in idle mode, press it to open the main menu.
12 13 Master Handset When a SIP account is created on the gateway through handset menu, the hand- set will be set as the master headset of the SIP account. Users of this handset can congure the settings in base related to the SIP account through the menu on the master handset.
12 13 13 Main Menu Sub Menu Function description Contacts Private Directory Accesses local phonebook, Maximum 150 entries Public Directory Accesses shared phonebook which is stored in the gateway , Ma.
14 15 Main Menu Sub Menu Function description System Network Views the network settings of the gateway H /S User P assword Changes handset user password.
14 15 15 General Settings Phone status Enter “Status” menu. Select item “SIP Account Status” to view the associated SIP accounts status (registered/disabled). Select item “Network Status” to view the base network information. This includes base network type, IP Address, subnet mask, default gateway and DNS.
16 17 To make an external call through default line: Enter the number/IP address in pre-dialing page or select a record in phonebook/call log list. Then press the Talk On key or OK key . The default outgoing line will be selected automatically for the call making.
16 17 17 Call Forward On the master handset, Enter “Services” [ “Call Forward” menu. Highlight the SIP account to enable/disable call forward. Use left and right navigation keys to highlight the call forward options.
18 19 Call Waiting When there is a call waiting, you can -press “Accept” soft key to answer the call waiting and put the current call on hold. -press “Reject” soft key to reject the call.
18 19 19 Account Settings SIP Account Setup: Users can setup SIP Accounts on the base through the handset. On the handset, go to the menu “Settings” [ “VOIP Account Setup” View SIP Account Status: Users can view the status of the accounts which are associated with the handset.
20 21 Base: Hold down the page key for 1 0 seconds. Then release the key . Press the key again. The settings in base will go back to factory default. Firmware upgrade Handset: Go to the menu “System” [ “Firmware Upgrade”. The phone will check the avail- ability of new software version.
20 21 21 Service If trouble is experienced with this equipment, for repair or warranty information, please contact customer service at 1-800-5 1 1-3 180. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
22 23 Warranty Limited Warranty What your warranty covers: • Defects in materials or workmanship For how long after your purchase: • Two years, from date of purchase What we will do: • Provide you with a replacement unit. The exchange unit is under warranty for the remainder of the original product’s warranty period.
22 23 23 • Products purchased or serviced outside the USA • Acts of nature, such as, but not limited to lightning damage • 3rd party products, such as headsets Product Registration: • Please complete and mail the Product Registration Card packed with your unit.
24 25 Visit the RCA web site at www .rca4business.com Please do not send any products to the Oregon address listed in this manual or on the carton. This will only add delays in service for your product. Teleeld NA Inc. 49 15 SW Grith Dr . #302 Beaverton, Or 97 005 RCA is a trademark of RCA Trademark Management S.
24 25 25.
Een belangrijk punt na aankoop van elk apparaat RCA IP160/060 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen RCA IP160/060 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens RCA IP160/060 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding RCA IP160/060 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over RCA IP160/060 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van RCA IP160/060 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de RCA IP160/060 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met RCA IP160/060 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
