Gebruiksaanwijzing /service van het product M3S-UFLA32R van de fabrikant Renesas
Ga naar pagina of 37
Rev.1.40 Revision Date: Mar. 06, 2007 M3S-UFLA32R User’s Manual UART Flash Memory Programming Utility RE J 1 0 B 0 2 3 9 - 0 14 0 All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Technology Corp.
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with r.
Precautions on Using The Product Described Herein 1. The product describe d herein should be used in com bination with the p arts included w ith the starter kit. If the product is operated in com bination with any oth er item, its operat ion cannot be guaranteed.
Contents-1 Contents 1. Ov erview ................................................................................................................... .... 1 2. System C onfigurat ion .....................................................................
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 1 of 30 1. Overview This user ’ s manual is intended to provide ex plan ations ab out system configuration and operation method of the UA RT Flash Mem ory Programmin g Utility M3 S-UFLA32R V er .
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 2 of 30 2.2 Communication Cable (M3A-2145G50) Communication ca ble consists of two d ifferent cable s below .
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 3 of 30 RJJ99J0021-0100 Figure 2.2.2 MF-TEN-NINE Cable Connecting Diagram.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 4 of 30 T able 2.2.1 Usage S pecification Rated V alue Parameter MIN MAX Unit Condition 3.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 5 of 30 3. Instal lation of the M3S-UFLA32R 3.1 Installation of the M3S-UFLA32R T o install the M3S-UFLA32R, perform the following steps. 1) Execute Setup.exe in " ¥Eng¥T ool¥Ufla32r¥W95E" folder contained in the provided CD.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 6 of 30 4. Operation Method of the M3S-UFLA32R 4.1 S tartup Double-click the ic on after the M3S-U FLA32R setup is complet ed. 4.2 Exit Choose [ Exit(X )] fr om [File(F )] menu.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 7 of 30 4) Reset the T arget MCU Reset the target MCU by pressing th e reset switch on the targ et board.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 8 of 30 5. Function Description of the M3S-UFLA32R 5.1 Function List T able 5.1 lists functions of the M3S-U FLA32R. Choose each function from menu or click a button for execution.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 9 of 30 5.2 Program Data (Motorol a S-format file) Selection (1) Choose [Load(L )] from [File(F )] menu or click [Refer] button.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 10 of 30 (3) Choose a file to display the dialog that shows ex ecution process, and then re ad program dat a file into the internal buf fer . After com pleting read, the dialog is closed and file nam e is displayed in "File Name:" box.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 1 1 of 30 5.4 Lock Bit Information (1) Choose [Lock Bit Information (L )] from [Display(V )] menu to displ ay the dialog that shows execution process, and then read lock bit.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 12 of 30 (3) In [Lock Bit S t atus Display] dialog, the lock bit stat uses of all blocks of curr ently selecte d MCU are displayed . Click [OK] to close "Lock Bit S tatus Display" dialog.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 13 of 30 5.5 Program (1) Choose [Program(P )] from [Device(D )] menu or click [Program] button to display the dialog that shows execution proce ss, and then write program dat a stored in the interna l buf fer to the flash memory .
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 14 of 30 5.6 Erase (1) Choose [Erase(E )] from [ Device(D )] menu or click [Erase] button to displ ay the dialog that shows execution process, and then erase the flash memory .
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 15 of 30 5.7 Block Erase (1) C hoose [Block Er ase(L )] from [Device(D )] menu to display "Block Erase" dialog. Figure 5.7.1 Block Erase (2) In "Block Erase" dialog, all blocks of currently selected MCU are displayed .
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 16 of 30 (3) Click [OK] in the "Block Erase…finish" dialog to close the dialog.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 17 of 30 5.8 Lock Bit/Set (1) Choose [Lock Bit]-[Set(S )] from [Device(D )] menu to display the dialog t hat shows execution process, and then read out lock bit.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 18 of 30 (2) In "Lock Bit Set" dialog, the blocks without setting of lock bit are displayed. Click [Select All] to select all blocks. Click [Clear] to clear all selected blocks.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 19 of 30 5.9 Lock Bit/Enable (1) Choose [Lock Bit]-[Enable(E )] from [ Device(D )] menu to display the dialog that shows execution process, and then enable lock bit.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 20 of 30 5.10 Lock Bit/Disable (1) Choose [Lock Bit]-[Disable(D )] from [Device(D )] menu to display the dialog that shows ex ecution process, and then di sable lock bit.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 21 of 30 5.1 1 Blank Check (1) Choose [Blank Check(B )] from [Device(D )] menu or click [Blank Check] button to display the dialog that shows execution process, and then pe rform bl ank check o peration.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 22 of 30 5.12 V erify Check (1) Choose [V erify Check(V )] from [Device(D )] menu or click [V erify Check] button to display the dialog that shows execution process, and then pe rform veri fy check operation.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 23 of 30 5.13 E.B.P .V . (Erase, Blank Check, Program, V erify Check) (1) Choose [Batch Processi ng] -[E.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 24 of 30 5.15 B.P .V . (Blank Check, Program, V erify Check) (1) Choose [Batch Processing ]-[B.P .V .] from [Device(D )] menu or click [B.P .V .] button to consecutively execute "Blank Check," "Pr ogram," and "V erify Check.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 25 of 30 5.16 Setting (1) Choose [Setting(S )] from [Others(O )] menu to display "Setup" dialog.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 26 of 30 (2) In the "Setup" dialog, it is possibl e to choose M CU ty pe, verify process, and write ID code i nto the ID code area. It is possible to choose MCU from "Mcu T ype(M )" pull-down menu.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 27 of 30 5.17 ID Code Setting (1) Choose [ID Code Setting(I )] from [Others(O )] menu to display "ID code setting" dialog.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 28 of 30 (2) In the "ID code setting" dialog, the ID c ode for verification is set. T able 5.17.1 shows function list of operable and n ot operable functions accordi ng with the verify result.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 29 of 30 5.18 V ersion Information (1) Choose [V ersion information (UFLA32R) (A )] from [Help(H )] menu to display "V ersion information (UFLA32R)" dialog.
M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 30 of 30 6. Error Message List T able 6.1.1 lists error messages, causes, and approa ches provided from the M 3S-UFLA32R. T able 6.1.1 Error Message List Error Message Cause Approach 1 MCU information is incorrect.
Revision History M3S-UFLA32R UART Flash Memory Programming Utilit y Description Rev . Date Page Summary 1.00 Jun 25, 2000 - First edition issued. 1.01 Dec 4, 2000 - Changed output messa ge from Japa nese to English. 1.02 Jan 29, 2002 7 Added references to 2) Connecting Ho st PC with T arget System in Chapter 3.
Uart Flash Memor y Programming Utility User’ s Manual M3S-UFLA32R Publication Date: 1st Edition, Jun., 2000 Re v .1.40, Mar . 06, 2007 Published b y: Sales Strategic Planning Div . Renesas T echnology Cor p. 2007. Renesas T echnology Cor p., All r ights reser ved.
M3S-UFLA32R User’s Manual 2- 6 -2, Ote-machi, Chiyoda-ku, Tokyo, 1 00-0004, Japan.
Een belangrijk punt na aankoop van elk apparaat Renesas M3S-UFLA32R (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Renesas M3S-UFLA32R heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Renesas M3S-UFLA32R vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Renesas M3S-UFLA32R leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Renesas M3S-UFLA32R krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Renesas M3S-UFLA32R bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Renesas M3S-UFLA32R kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Renesas M3S-UFLA32R . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
