Gebruiksaanwijzing /service van het product CR9935 van de fabrikant Roberts Radio
Ga naar pagina of 24
CR9935 PLL RDS Dual Alarm Clock Radio Please read this manual before use ROBER TS Sound for Generations.
Important Information ......................................................... 1 Automatic plug and play setup .......................................... 2 Controls ........................................................................... 3-4 Display .
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Automatic Plug and Play setup When your Clock Radio is first connected to the mains supply or after a p.
3 Controls 1. Preset buttons 2. Display button 3. Sleep button 4. On/Off button (Top) 1 9. Snooze/Night Light button 10. Weekend cancel/Traffic button 11. Memory button 12. Alarm 2 button 5. Radio text button 6. Time button 7. Program type button 8. Light button 13.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 4 Controls (Left side) 17. Headphone socket 18. Volume control 17 18 (Right side).
5 1. Waveband indicators 2. Auto time indicator 3. Traffic information indicator 4. Enhanced other networks indicator 5. RDS indicator 6. Memory indicator 7. Frequency, time and text display area 8. Weekend cancel indicator 9. Sleep time indicator 10.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Mains operation 1. Place your radio on a flat surface. 2. Plug the mains plug into a wall socket and switch on the wall socket. Display backlight The display back light will be switched on for 10 seconds whenever any button is pressed.
7 Setting the clock automatically The clock time and day of week can be set automatically when receiving an RDS station that transmits clock time (CT). The CT information is transmitted once every minute. If the station has sufficient signal strength the clock will set within one or two minutes.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Setting the clock manually 1. Ensure that the radio is switched off. 2. Repeatedly press the Time button until the auto time symbol is removed from the display.
Setting the alarm times 1. Press and hold down the Alarm 1 or Alarm 2 buttons . 2. Whilst the Alarm 1 or Alarm 2 button is held down set the alarm time by pressing the Up or Down buttons . The clock uses the 24 hour system e.g. 2:30pm is shown as 14:30.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Snooze control 1. The radio or buzzer alarm can be silenced for 5 minutes by pressing the Snooze button . This sequence can be repeated during the 90 minutes alarm period.
Operating your radio - search tuning 1. Switch on your clock radio by pressing the On/Off button. 2. Select the required waveband by pressing the Band button . The waveband selected will appear in the display. On FM fully extend the pigtail aerial from the rear of your clock radio.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Operating your radio - manual tuning 1. Switch on your radio by pressing the On/Off button . 2. Select the required waveband by pressing the Band button .
13 Pre-setting stations You may store up to 10 different stations on each of the two wavebands giving a total of 20 preset stations. 1. Switch on your radio using the On/Off button . 2. Select the desired waveband using the Band button . 3. Tune into the required station using one of the tuning methods previously described.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Recalling a preset station 1. Switch on your radio using the On/Off button . 2. Select the desired waveband using the Band button. 3. Press one of the Preset buttons to recall the station.
15 Radio Data System ( RDS ) The R adio D ata S ystem ( RDS ) is a system in which inaudible digital information is transmitted in addition to the normal FM radio programme.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Operating your radio using RDS (Radio data system) 1. Switch on your radio and select the FM waveband. 2. Tune into a station, the display will indicate frequency for two seconds and then change to show the station name.
17 Radio Text (RT) The RDS system provides a text message of up to 64 characters in length. It is displayed by scrolling the characters of the message from right to left. 1. Switch on your radio and select the FM waveband. Tune into a station carrying RDS information.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Programme Type search (PTY) 1. To search for a station of a particular type, repeatedly press and release the PTY button until the required programme type is shown in the display.
19 5. If the station carries Enhanced Other Network information the EON symbol will appear in the display. The radio will automatically tune to other stations transmitting traffic information. When the traffic announcement has finished the radio will re-tune to the previously selected station.
Demonstration mode Your radio is equipped with a demonstration mode which when active highlights the main features available on your clock radio. 1. Press and hold down the Display button until the display enters Demonstration mode. 2. Press any key to cancel demonstration mode.
21 Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363). If another type of plug is used a 5A fuse should be fitted in the plug, adaptor or distribution board.
Specifications Power Requirements Mains AC 230 volts, 50Hz only Batteries 2 x LR6 (AA size) for clock/memory Frequency Coverage F M 87.5-108MHz M W 522- 1620kHz Circuit Features Loudspeaker 77mm 8ohms Output Power 500mW into 8ohms Headphone socket 3.
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 Guarantee This instrument is guaranteed for twelve months.
Een belangrijk punt na aankoop van elk apparaat Roberts Radio CR9935 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Roberts Radio CR9935 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Roberts Radio CR9935 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Roberts Radio CR9935 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Roberts Radio CR9935 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Roberts Radio CR9935 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Roberts Radio CR9935 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Roberts Radio CR9935 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
