Gebruiksaanwijzing /service van het product CR9936 van de fabrikant Roberts Radio
Ga naar pagina of 24
CR9936 Dual Alarm CD Clock Radio With Night Light Please read this manual before use ROBER TS Sound for Generations.
1 Contents ............................................................................ 1 Controls .......................................................................... 2- 3 Switching on and setting the time .................................... 4 Listening to the radio .
Controls 1. Night Light button 2. On/Off button 3. Sleep button 4. Repeat button 5. CD mode button 11. CD display button 12. Time set button 13. Snooze button 14. Alarm 1 indicator 15. PM indicator 2 6. B.Skip/down button 7. Play/Pause button 8. F.Skip/up button 9.
3 Controls 25. Buzz/Music switch 26. Alarm 2 function switch 27. Alarm 1 function switch 28. Headphone socket 29. Night Light 30. Tuning control 31. Volume control 32.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Switching on and setting the time Before using your CD clock radio you must first set the correct time. 4 2 2 3 4 4 1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on the wall socket.
5 Listening to the Radio 1. Switch on your CD clock radio by pressing the On/Off button . The On indicator LED will light. 2. Slide the Function switch to the required waveband. 3. Tune in to the desired station by rotating the Tuning control . The station frequency is indicated in the dial scale.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up.
7 Inserting a CD 1. Press the On/Off button to switch on your CD clock radio. The On indicator will light. 2. Set the Function switch to CD. 3. To open the CD compartment, lift the CD door on the rear edge as shown. 4. Press the CD onto the spindle until it clicks into place.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 8 Playing a CD 1. Press the Play/Pause button to start playback. The display will show the track number. After a short time the display will revert to showing time.
9 Selecting a track 1. Whilst the CD is playing, press either the F.skip or B.skip buttons to change to the desired track. You can also skip tracks when the player is in stop mode. Skip to the desired track using the F.skip or B.skip buttons. 2. Press the Play/Pause button to play the selected track.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 10 CD repeat mode 1. Whilst the CD is playing press the Repeat button once to repeat the current track. The Repeat indicator will flash. 2. Press the Repeat button again to repeat all tracks on the CD.
11 Programmed play By programming the player you can play up to 20 tracks in any desired order. 1. Whilst the CD is in STOP mode, press the Memory button . The display will show ‘ P 01’. Note: the display will revert to showing time after 10 seconds of inactivity.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Setting alarm times The alarms can be set to wake you by a buzzer, CD or the radio. Your CD clock radio has 2 separate alarms which can be set to activate at different times.
Checking the Alarm Times 1. To check alarm 1 time, set the Alarm 1 function switch to the 'Adj' position. Alarm 1 time will flash in the display. 2. Return the Alarm 1 function switch to the 'Off' position. The display will revert to showing time.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Setting the alarms to wake to buzzer 1. Set the alarm time as previously described. Set the Alarm mode switch to the 'Buzz' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position.
Setting the alarms to wake to radio 1. Set the alarm time as previously described. Set the Alarm function switch to the 'Music' position. 2. Set the Alarm 1 or Alarm 2 selector switch to the 'On' position. The corresponding Alarm indicator will light.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Setting the alarms to wake to CD 1. Set the alarm time as previously described. Set the Alarm function switch to the 'Music' position. 2. Set the Alarm 1 or Alarm 2 selector switch to the 'On' position.
17 Setting the alarm to wake to CD programme 1. Set the alarm to wake to CD as previously described. 2. Programme your favourite tracks as described earlier. 3. Press the Play button followed by the CD Stop button. 4. Press the On/Off button to switch off your CD clock radio, the On indicator will switch off.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 18 Snooze control 1. The buzzer, CD or radio alarm can be silenced for 6 minutes by pressing the Snooze button. This sequence can be repeated during the 90 minute alarm period.
Headphones 1. A Headphone Socket (3.5mm) located on left side is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker. Night light 1. Press the Night Light button to adjust level of night light, press once for dim light press once again for bright light and once again to switch off.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 20 The Company reserves the right to amend the specification without notice. Specifications Power Requirements Mains AC 230 volts, 50Hz only Back-up Battery IEC size 6LR61 (6F22, PP3) Frequency Coverage F M 87.
21 Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363). If another type of plug is used a 5A fuse should be fitted in the plug, adaptor or distribution board.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below.
ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1.
Een belangrijk punt na aankoop van elk apparaat Roberts Radio CR9936 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Roberts Radio CR9936 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Roberts Radio CR9936 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Roberts Radio CR9936 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Roberts Radio CR9936 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Roberts Radio CR9936 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Roberts Radio CR9936 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Roberts Radio CR9936 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
