Gebruiksaanwijzing /service van het product CR9970 van de fabrikant Roberts Radio
Ga naar pagina of 24
CR9970 Dual Alarm CD Clock Radio Please read this manual before use ROBER TS Sound for Generations cr9970 instruction book.PMD 6/11/2004, 10:57 AM 1.
2 Contents ............................................................................ 2 Controls .......................................................................... 3- 4 Switching on and setting the time .................................... 5 Listening to the radio .
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 3 Controls Front 1. Stop button 2. Repeat button 3. Snooze button 4. B.Skip button 5. Time Set button 11. Low Battery LED 12. Clock/CD Display 13. Play/Pause button 14.
4 Controls 25. Alarm 1 function switch 26. Alarm 2 function switch 27. Dimmer switch 28. Alarm Mode switch 29. CD Door handle 30. Tuning control 31. Function switch 32. Volume control 33. Battery compartment (on underside) 25 26 27 28 29 30 31 32 Left hand side Right hand side 33 cr9970 instruction book.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 5 Switching on and setting the time Before using your CD clock radio you must first set the correct time. 1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on at the wall socket.
6 Listening to the Radio 1. Switch on your CD clock radio by pressing the Power On button . The Power indicator LED will light. 2. Slide the Function switch to the required waveband. 3. Tune in to the desired station by rotating the Tuning control . The station frequency is indicated in the dial scale.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 7 Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up.
8 Inserting a CD 1. Press the Power On button to switch on your CD clock radio. The Power indicator will light. 2. Set the Function switch to CD. 3. To open the CD compartment, lift the CD door by the handle as shown. 4. Press the CD onto the spindle and close the CD door .
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 9 Playing a CD 1. Press the Play/Pause button to start playback. The Play indicator will light. The display will show the track number. 2. Set the Volume control to the required setting.
10 Selecting a track 1. Whilst the CD is playing, press either the F.skip or B.skip buttons to change to the desired track. You can also skip tracks when the player is in stop mode. Skip to the desired track using the F.skip or B.skip buttons. 2. Press the Play/Pause button to play the selected track.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 11 CD repeat mode 1. Whilst the CD is playing press the Repeat button once to repeat the current track. The Repeat indicator will flash. 2. Press the Repeat button again to repeat all tracks on the CD.
12 Programmed play By programming the player you can play up to 20 tracks in any desired order. 1. Whilst the CD is in Stop mode, press the Program button . The display will show ‘01’ and the Program indicator will flash. 2. Select the first track you wish to play using the F.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 13 1 Erasing a programme 1. Programmes are erased by opening the CD door , changing position of the Function switch , pressing the Power Off button , or interrupting the mains supply.
14 Setting the alarm times The alarms can be set to wake you by a buzzer, CD or the radio. Your CD clock radio has 2 separate alarms which can be set to activate at different times. Setting Alarm 1 1. Slide the Alarm 1 function switch to the 'Adj' position.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 15 Checking the Alarm Times 1. To check Alarm 1 time, set the Alarm 1 function switch to the 'Adj' position. Alarm 1 time will show in the display.
16 Setting the alarms to wake to buzzer 1. Set the alarm time as previously described. Set the Alarm mode switch to the 'Buzz' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position. The corresponding Alarm indicator will light.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 17 Setting the alarms to wake to radio 1. Set the alarm time as previously described. Set the Alarm Mode switch to the 'Music' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position.
18 Setting the alarms to wake to CD 1. Set the alarm time as previously described. Set the Alarm Mode switch to the 'Music' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position. The corresponding Alarm indicator will light.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 19 Snooze control 1. The buzzer, CD or radio alarm can be silenced for 7 minutes by pressing the Snooze button. This sequence can be repeated during the 60 minute alarm period.
20 Dimmer 1. The Dimmer switch, located on the left side of your clock radio, can adjust the intensity of the clock display to suit room brightness. Slide the Dimmer switch to either the High or Low setting to change the display brightness. 1 1 Changing the back up battery 1.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 21 The Company reserves the right to amend the specification without notice. Specifications Power Requirements Mains AC 230 volts, 50Hz only Back-up Battery IEC size 6LR61 (6F22, PP3) Frequency Coverage F M 87.
22 Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363). If another type of plug is used a 5A fuse should be fitted in the plug, adaptor or distribution board.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 23 Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below.
ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 cr9970 instruction book.
Een belangrijk punt na aankoop van elk apparaat Roberts Radio CR9970 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Roberts Radio CR9970 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Roberts Radio CR9970 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Roberts Radio CR9970 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Roberts Radio CR9970 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Roberts Radio CR9970 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Roberts Radio CR9970 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Roberts Radio CR9970 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.