Gebruiksaanwijzing /service van het product FPE2607DV van de fabrikant Audiovox
Ga naar pagina of 31
26” HD FLA T P ANEL LCD TV WITH BUIL T -IN DVD PLA YER PL V31260CS10 / A UDIOVO X I/B 811-312691W030 <English> SIZE : 148 X 210MM MA TERIAL : 80g WOODSFREE P APER OWNER'S MANUAL FPE2607DV FOR ASSIST ANCE CALL CUSTOMER SER VICE A T 1-800-645-4994 OR VISIT US A T WWW .
E - 1 SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
E - 2 IMPORT ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with a dry cloth. 7) Do not block any ventilation openings.
E - 3 CONTENTS SAFETY PRECAUTIONS ................................ 1 IMPORT ANT SAFETY INSTRUCTIONS ............................................................................. 2 MAINTENANCE ................................................ 2 CONTENTS .
E - 4 DISC FORMA TS NOTES ON COPYRIGHT It is forbidden by law to copy , broadcast, show, broadcast on cable, play in public or rent copyrighted material without permission. Apparatus Claims of U.S. Patent Nos. 4,907,093; 5,315,448 and 6,516,132 licensed for limited viewing uses only .
E - 5 ACCESSORIES Please check and identify the supplied accessories. Remote Control (with batteries) ................................................................................................. x 1 GETTING ST ARTED USING THE REMOTE CONTROL • Point the remote control at the remote sensor located on the unit.
E - 6 CONTROL REFERENCE GUIDE REMOTE CONTROL 1. ST ANDBY / ON button Press to turn ON the unit or put it in ST ANDBY (OFF) mode. 2. TV button Press to switch to TV mode. DVD button Press to switch to DVD mode. A V button Press to switch to source connected to A V1 / A V2 (composite) input.
E - 7 CONTROL REFERENCE GUIDE REMOTE CONTROL 1 7 . FUNCTION button Press to switch between TV / A V 1 / A V 2 / YUV in / DVD / HDMI 1 / HDMI 2 / PC in. 18 . LAST CH button Press to switch repeatedly between the last two channels displayed. 19. MUTE button Press to turn off the sound.
E - 8 CONTROL REFERENCE GUIDE FRONT & SIDE VIEWS 1. STD.BY / ON button Turns the unit on and off. 2. MENU button Enters the on-screen TV menu. 3. FUNCTION button Selects TV / A V 1 / A V 2 / YUV in / DVD / HDMI 1 / HDMI 2 / PC in. 4. CH buttons Confirms selections on the TV menu screen and changes the TV channels.
E - 9 CONTROL REFERENCE GUIDE REAR VIEW 12. AUDIO IN (Left/Right) jacks (A V IN 2) 13. VIDEO IN jack (A V IN 2) 14. VIDEO IN jack (A V IN 1) 15. Headphones jack 16 . TV ANTENNA terminal 17. AUDIO IN (Lef t / Right) jacks (A V IN 1) 18. S-VIDEO IN jack (A V IN 1) 19.
E - 10 CONNECTIONS CONNECTING A TV ANTENNA / CABLE / SA TELLITE T o view television channels correctly , a signal must be received from one of the following sources: - An indoor or outdoor aerial ante.
E - 11 CONNECTIONS CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO OUTPUT T o connect A/V devices such as a VCR, video game system or camcorder: Connecting to a VCR / Video Game System / C.
E - 12 CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input.
E - 13 CONNECTIONS CONNECTING HDMI T o HDMI OUT jack HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV , set-top boxes and other digit al AV devices.
E - 14 CONNECTING THE AC POWER CORD • Connect the AC power cord into a wall outlet. • Press the STD. BY / ON button on the left side of the unit or use the remote control to turn on the unit. NOTES • TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG TO WIDE SLOT OF W ALL OUTLET , THEN FULL Y INSERT .
E - 15 INST ALLA TION REMOVING THE BASE ST AND WARNING: The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object s, or anything that could scratch or damage the LCD display , come in contact with it.
E - 16 SOUND SYSTEM DOLBY DIGIT AL (FOR DVD) Dolby Digital is a sound system developed by Dolby Laboratories Inc. This unit automatically recognizes DVDs that have been recorded with Dolby Digital. Not all Dolby Digital sources are recorded with 6 channels.
E - 17 TV SETUP VIDEO MENU 1. Press the MENU button. 2. Press the ENTER or button to select Video . 3. Use the or button to select the options (Picture Mode, Brightness, Contrast, Saturation, Tint, Sharpness or Color T emperature).
E - 18 AUDIO MENU 1. Press the MENU button. 2. Use the or button to select Audio, then press the ENTER or button to go into the Audio settings. 3. Use the or button to select the options (Balance, Bass, T reble, Virtual Surround, Reverb or Sound mode) .
E - 19 TV MENU (For TV Mode Only) 1. Press the MENU button. 2. Use the or button to select TV . Press the ENTER or button to go into the TV settings. 3. Use the or button to select the options ( T uner Mode, Auto Scan, Auto Scan Add CH, Channel Skip, MTS or Audio Language).
E - 20 SETUP MENU 1. Press the MENU button. 2. Use the or button to select Setup . Press the ENTER or button to go into the Setup settings. 3. Use the or button to select the options (OSD Language, Time Setup, Caption or Restore setting).
E - 21 Restore Setting If you reset the TV to the factory settings, all your present settings on Video & Audio will be erased and replaced by the factory’ s default settings. However, picture settings in PC mode and Parent al settings will not be erased.
E - 22 Rating Enable : Select On to edit the following parental items. Select Off to disable parental control. Open V -Chip : Reads the ratings from A TSC TV programs if there is rating information broadcasted, and denies the channel when its rating is higher than the ratings you pre-set.
E - 23 PLA YING A DISC This owner’s manual explains the basic instructions of this unit. Some DVDs are produced with limited operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features.
E - 24 PLA YING A DISC ANGLE SELECTION (DVD) Some DVDs contain scenes that have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number current angles available.
E - 25 LOCA TING A SPECIFIC TITLE (DVD) If a DVD contains title numbers, you can locate a specific title by directly selecting its title number . 1. In STOP mode, press the GOTO button. 2. Press the or button to highlight a specific field and press the corresponding number button(s) for the title you want.
E - 26 REPEA T PLA YBACK Repeating a Specific Section (DVD) (CD) Y ou can play a specific section repeatedly . 1. While the disc is playing, press the REPEA T A-B button at the beginning of the section ( is displayed) you want to play repeatedly .
E - 27 DVD / CD PROGRAMMABLE PLA YBACK PROGRAMMABLE MEMORY The two types of programmed playback provided by this unit are title/chapter programmed playback and track programmed playback.
E - 28 CUSTOMIZING THE FUNCTION SETTINGS SYSTEM SETUP 1. Press the SETUP button in STOP mode. 2. Use the button to select LANGUAGE SETUP , then press the or button repeatedly until SYSTEM SETUP appears. 3. Use the or button to select the option ( TV TYPE or DEF AUL T ), then press the button.
E - 29 TROUBLESHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) • The region number of the disc does not match the region number of this unit. The picture is not clear. No picture. • Make sure that you select DVD mode. • The system is in pause mode. Press the PLA Y button to return to normal PLA Y mode.
Unit : INCH 26 1/4 18 3/4 7 7/8 19 3/4 22 5/8 8 1/4 3 7/8 8 5/8 5 1/8 Printed in China 81 1-312691W031 PLV31260_ib_eng_17-30.pmd 9/13/2007, 3:36 PM 30.
Een belangrijk punt na aankoop van elk apparaat Audiovox FPE2607DV (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Audiovox FPE2607DV heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Audiovox FPE2607DV vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Audiovox FPE2607DV leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Audiovox FPE2607DV krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Audiovox FPE2607DV bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Audiovox FPE2607DV kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Audiovox FPE2607DV . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
