Gebruiksaanwijzing /service van het product MMP-2 van de fabrikant Roland
Ga naar pagina of 61
Owner’s manual All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. http://www.roland.co.jp/ Copyright © 2002 ROLAND CORPORATION Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY”(p.
2 USING THE UNIT SAFELY • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. ................................................................................................ • Do not open or perform any internal modifi- cations on the unit.
3 USING THE UNIT SAFELY • Protect the unit from strong impact. (Do not drop it!) ................................................................................................ • Do not force the unit ’ s power-supply cord to share an outlet with an unreasonable number of other devices.
4 Contents USING THE UNIT SAFELY ....................................................... 2 Contents ................................................................................... 4 IMPORTANT NOTES .................................................
5 Contents Settings for Digital Connections .......................................... 26 Sampling Clock Source .......................................................................................... 26 Sampling Frequency ..........................
6 IMPORTANT NOTES In addition to the items listed under “USING THE UNIT SAFELY” (p. 2), please read and observe the following: Power Supply • Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system).
7 IMPORTANT NOTES • Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions. • Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit.
8 Getting Started Checking the Included Items This product includes the following items in addition to the MMP-2 itself. Check to make sure they are all present and accounted for. If anything is missing, contact the retailer from whom you purchased the product.
9 Top and Rear Panels Top and Rear Panels Top Panel 1. [METER] Button This changes the meter display. (p. 16) 2. [PATCH] Button This performs Select, Store, and Reset operations for patches. (p. 14) 3. [SYSTEM] Button This accesses Clock, USB, and other functions.
10 Top and Rear Panels These adjust the [MIC IN] sensitivity. (p. 17) 10. [PEAK] Indicators These light up when the input level exceeds the set value. (p. 17) 11. [PHANTOM/PHASE/LO-CUT] Buttons These call up the Phantom power switches, plus the Phase, Lo-cut, and Attenuator setting screens.
11 Function Organization and Signal Flow Function Organization and Signal Flow The diagram below shows how the functions are organized, and how the signals flow.
12 Set Up and Basic Operations This chapter introduces the basic functions of the MMP-2 in the following order, which you should follow in getting started with your new unit. Read through this in sequence as you try things out for yourself. Getting Ready to Switch on the Power ■ Making the Connections fig.
13 Set Up and Basic Operations Set Up and Basic Operations Connecting the Input Device Microphone Input (MIC IN) Use the XLR or phone plug to connect the input device. fig.MicInPin.eps * Microphone input for the unit uses a balanced-type (XLR/TRS) jack which is wired as shown in the figure.
14 Set Up and Basic Operations Global Functions Save pressing [ENTER] button When you change system parameters or input parameters, the [ENTER] button lights up. This indicates that there are changes that have not been saved. Pressing the [ENTER] button saves them immediately.
15 Set Up and Basic Operations Set Up and Basic Operations Patch Selection (SELECT) The alphabet character shown upper left side of the patch number is showing the status of patch. (U) to be indicated if it is a user patch. (P) to be indicated if it is a preset patch.
16 Set Up and Basic Operations 4. Re-press [ENTER]. Reset will be executed. Once the reset is completed, system go back to normal screen after indicating “ Completed. ” on screen. ■ Meters Press the [METER] button to select from the three types of level meters.
17 Set Up and Basic Operations Set Up and Basic Operations Settings for the Analog Inputs ■ Pad Pressing either of these switches attenuates the MIC IN input signal by 20 dB. You use these at times such as when devices other than microphones are connected.
18 Set Up and Basic Operations ■ Phase fig.MicInPin.eps The microphone input jacks for this unit are balanced. The jack wiring is shown in the figure. However, Hot and Cold may be reversed of MMP-2 on some balanced equipment. If such equipment is connected, sound localization may be poor, or the balance of left and right will be disrupted.
19 Using Effects Using Effects The effects this unit provides are divided into four groups, which are respectively assigned to the four [EDIT SELECT] buttons [MODEL], [EQ], [DYNAMICS], and [PLUG IN]. The functional algorithms are pre-set according to the types of patches (p.
20 Using Effects Modeling Microphone (OUTPUT) This table shows the choices for different microphones or microphone types that the effect will model. When you select a condenser microphone modeling for “ OUTPUT, ” lower range response is extended, so bass noise from the microphone stand may become prominent.
21 Using Effects Using Effects Because you can make the settings anywhere within this range, it ’ s even possible, for instance, to set all four points so they ’ re stacked at the same location, and create a sharp filter. * A frequency 3 dB lower than the flat portion of the response curve is taken to be the cutoff frequency.
22 Using Effects Compressor Type (TYPE) This chooses the type of compressor. “ SOLID ” : Semiconductor compressor characteristics “ TUBE1 ” ... ” TUBE4 ” : Vacuum-tube compressor characteristics Key In Channel (KEY IN) The compressor operates when the input level of the channel specified here exceeds the threshold.
23 Using Effects Using Effects ■ Expander This lowers or suppresses, at a constant ratio, low-volume sounds that do not reach the threshold. It is effective for low-volume noise. Expander OFF/ON (EXP) This is the On/Off switch for the expander effect.
24 Using Effects Enhance Level (ENHLEV) This is to set the level to increase. The level can be set from 0.0 dB to 12.0 dB. This is not available for de-esser. De-esser Rejection Level (DESREJ) This is to set the level to decrease. The level can be set from -24.
25 Using Effects Using Effects Bright This parameter adjusts the brightness of the input sound by changing the high frequency content's balance. Brightness Frequency (BRT F) This sets the lower limit of this parameter. The sound components that are of a higher frequency than this parameter will be adjusted.
26 Settings for Digital Connections When you change the digital-connection settings, sound may stop momentarily until the new settings are in place. ■ Sampling Clock Source Select the source of sampling clock. fig.LcdClock.eps 1. Press the [SYSTEM] button several times to display “ CLOCK.
27 Examples of Use Examples of Use This section shows some examples of how you can use the MMP-2. * Before hooking up or turning on any equipment, make sure the volume on all devices is turned down. Analog Input to Analog Output The microphone input is output from the MMP-2 as an analog signal and sent to a recording device or a mixer.
28 Other Features ■ Channel Linking This interlinks the effect parameters for the two channels. You can use it with stereo recording or other applications. Input parameters are not linked. Linking Hold down the [EDIT CH SELECT] button for channel 1 and press the [EDIT CH SELECT] button for channel 2.
29 Other Features Other Features 2. Press [PAGE] button several times to display “ RECOVER ” on screen. 3. Operate external devices like computer to start sending/receiving signal. ■ Route Select one of the following routings from input to output.
30 Use of computer and setup You can add effect algorithms via a USB connection. You can also use a computer editor to easily and intuitively change the equalizer and dynamics parameters. What ’ s more, you can also exchange MIDI signals with the computer.
31 Use of computer and setup Use of computer and setup OMS or FreeMIDI is a driver to let MacOS to communicate with external devices on MIDI protocol. USB-MIDI driver is the driver that makes the communication on OMS or FreeMIDI through USB possible. You can download OMS from the Web site of Opcode Systems, Inc.
32 Use of computer and setup 7. Use the USB cable to connect the MMP-2 to your computer. As appropriate, switch the USB select switch to either the front or the rear position. fig.02-01.e 8. Turn on the power of the MMP-2. * After you have made connections correctly, you must turn on the power in this step.
33 Use of computer and setup Use of computer and setup * If you wish to use the MMP-2 at the same time as another USB device connected to your computer, disconnect the other USB device from the USB connector before installing the MMP-2 driver.
34 Use of computer and setup fig.003 8. From the Windows Start menu, select “ Run. ” fig.004 9. In the “ Open ” field of the dialog box that appears, enter “ Q:DriverWin2000Setupinf.exe ” and click [OK]. * Enter the drive name Q: appropriate for the drive name of your CD-ROM drive.
35 Use of computer and setup Use of computer and setup fig.01-05 14. The “ Files Needed ” dialog box will appear. In the “ Copy files from ” area, input “ Q:DriverWin2000 ” and click the “ OK ” button. Installation will be completed. * Change the drive name Q: to match the drive name of your CD- ROM drive.
36 Use of computer and setup fig.e.OmsDriverEInstallIcon.eps 1. In the “ MMP-2 Driver E ” folder of the CD-ROM, double-click the “ MMP-2 OMS Driver-E Installer ” icon. fig.e.OmsDriverEInstaller.eps 2. Make sure that OMS is already installed in the location where the driver will be installed, and click [Install].
37 Use of computer and setup Use of computer and setup fig.OmsAppleTalk.eps 4. If the “ Apple Talk ” dialog box appears, click [Turn It Off]. Then, in the dialog box that appears next, click [OK]. fig.OmsCreateNewStudioSetup.eps 5. The “ Create a New Studio setup ” dialog box will appear.
38 Use of computer and setup fig.OmsMidiDeviceSetup.eps 8. Verify that the MMP-2 is listed in the OMS MIDI device setting dialog box, then click [OK]. 9. A dialog box will appear, allowing you to save the settings file. Input the desired filename, and click [Save].
39 Use of computer and setup Use of computer and setup fig.e.FmDriverEInstaller.eps 2. Click [Install]. If the dialog box that all other currently-running applications will be exited appears, click [Continue].
40 Use of computer and setup fig.WelcomeToFreeMidi.eps 4. The first time FreeMIDI is started up, a “ Welcome to FreeMIDI! ” dialog box will appear. Click [Continue]. If this is the second or later time, select “ FreeMIDI Preferences ” from the File menu.
41 Use of computer and setup Use of computer and setup fig.FreeMidiConfiguration.eps 9. A setting window like the following will appear. Change “ MMP-2, MMP-2 Port ” to different name like “ MMP-2 interface ” . Change “ Device1 ” to different name like “ MMP-2 ” .
42 Trouble Shooting If the unit doesn ’ t work the way you think it should, check the items shown in the following table before you assume that there is a malfunction. If the cause of the problem is still unclear, contact your retailer or Roland Corporation ’ s Customer Service Center.
43 Trouble Shooting about Computer Trouble Shooting about Computer * Please read the “ReadMe” file in the MMP-2 Driver & Software CD-ROM. You can get any additional information not written in the owner’s manual from the “ReadMe” file. Windows users USB connections cannot be made correctly.
44 Trouble Shooting about Computer My computer hangs up when I open a MIDI file This problem can occur if the USB waveform of your computer does not sufficiently meet the standards. In this case, the problem may be solved if you connect the MMP-2 via a USB hub (USB hub containing a power supply).
45 Trouble Shooting about Computer Trouble Shooting about Computer Cannot make USB connections correctly ◆ Was the MMP-2 recognized? Disconnect the USB cable, and then re-connect it. If another USB device is connected, try connecting only the MMP-2.
46 MIDI Implementation Model: MMP-2 Version: 1.00 TRANSMITTED DATA AND REGOGNIZED RECEIVE DATA ■ Channel Voice message ● Polyphonic Key Pressure Transmits the level meter value of MMP-2(MIDI ch. is fixed to 16.) Status Second Third AFH mmH llH mm = Note No.
47 MIDI Implementation ❍ Data Set (DT1) Status Data Bytes Status F0H 41H,Dev,00H,4EH,12H,aaH,bbH,ccH,ddH, ..., eeH,Sum F7H Byte Description F0H Status of System Exclusive Message 41H Manufacturer ID.
48 MIDI Implementation |——————————+—————————+———————————————————————————————————————————————————| | 02 32 | 01 — 79 | EQ 1: Low EQ Frequency 20 — 20.
49 MIDI Implementation |——————————+—————————+———————————————————————————————————————.
50 MIDI Implementation ❍ Response 40 Complete (No Error) +——————————————————————————————————————————————.
51 MIDI Implementation | 48H — | 400 || 58H — | 1000 || 68H — | 2500 || 78H — | 6300 | | 49H — | 422 || 59H — | 1060 || 69H | 2660 || 79H — | 6700 | | 4AH — | 450 || 5AH — | 1120 || .
52 MIDI Implementation Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Program Change System Exclusive System Common System Real Time Aux Messages Notes Transmitted Recogn.
53 Specifications Analog Input Connector: XLR-3-31 type (balanced) 1/4 inch TRS phone type (balanced) Input Impedance: 40k Ω Phantom Power: DC 48 V and 7m A when the output is shorted PAD: 20 dB pad Maximum Input Level: + 2 dBu (PAD off) +22 dBu (PAD on) Nominal Input Level: -64 dBu – +4 dBu Equivalent Input Noise: -132 dBu (IHF-A typ.
54 Index Symbols +48V .......................................................................................... 17 A A-GAIN .................................................................................... 22 ATT analog input .....................
55 Index L LCDCNT .................................................................................. 14 LEVEL ....................................................................................... 22 Line Output ......................................
56 memo.
57 memo.
Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. As of January 1, 2002 (Roland) ARGENTINA Instrumentos Musicales S.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
02897523 ’02-2-E2-21KS This owner ’ s manual is printed on recycled paper..
40457423 1*REC About the Phantom Power of the MMP-2 Limitations and Conditions of Condenser Microphone The phantom power source of MMP-2 can drive Condenser Microphones with electrical specification 6.0mA or lower at 48V. Microphones that require more ampere is not supported.
Een belangrijk punt na aankoop van elk apparaat Roland MMP-2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Roland MMP-2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Roland MMP-2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Roland MMP-2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Roland MMP-2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Roland MMP-2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Roland MMP-2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Roland MMP-2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
