Gebruiksaanwijzing /service van het product S-OPT van de fabrikant Roland
Ga naar pagina of 18
Owner’s Manual S-OPT is a REAC optical converter that converts RSS Digital Snake System REAC signals to and from optical signals for long-distance digital audio transmission. By using this REAC optical converter and optical cables (sold separately), the REAC transmission distance can be extended to a maximum of 2 kilometers.
2 IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. ............................................................................................ 001-50 • Connect mains plug of this model to a mains socket outlet with a protective earthing connection.
4 USING THE UNIT SAFELY 012a • Immediately remove the power cord from the outlet, and request servicing by your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as l.
5 Important Notes In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2 and 3–4, please read and observe the following: 301 • Do not .
6 Panel Descriptions Optical Port This port is used to connect optical cables or optical cords. Two-core multimode, 50/125 micrometer core diameter optical fibers are supported. • Please use one of the following models of Neutrik’s Mobile Fiber Cable for the optical cable.
7 Panel Descriptions AC IN Connect the included power cord. Please use the cord clamp (p. 9) to fix the power cord and prevent it from being unplugged accidentally. POWER LINK Cable Clamp Clamp and fix the proprietary POWER LINK cable (ARC-15, sold separately).
8 Turning the Power On and Off This device has no power switch. Power is switched on by plugging the power cord into a power outlet; remove the plug from the outlet to switch power off. When powering up, first connect any peripheral devices, then plug in the power to the S-OPT before turning on the power to the connected devices.
9 Turning the Power On and Off Use the following procedure to secure the power plugs. 1. Insert the power cord into the AC INPUT on the rear panel. 2. Lower the power cord clamp to secure the power cord plug.
10 About Placement If you want to mount the S-OPT in a rack, make sure to use only the BOSS RAD-50 Rack Mount Adaptor (sold separately). To install, secure the S-OPT to the RAD-50 with three screws, one is screw supplied with the RAD- 50 and another two screws are supplied with the S-OPT.
11 Notes to Observe in Using the REAC System The REAC cable connected to the REAC port used by the REAC system to transmit sound can transmit multi- channel audio signals by using network technology. In very rare cases, noise may be generated when these systems are used in certain environments.
12 Notes to Observe in Using the REAC System Cat5e Crossover Wiring (REAC cable: SC-W100S) fig.app-01.eps Cat5e Straight-Through Wiring fig.app-02.eps Ethernet Connectors As mentioned previously, Cat5e Ethernet cables use RJ45 plugs. Each REAC device provides an RJ45 receptacle for its REAC ports.
13 Notes to Observe in Using the REAC System For REAC connections, make sure to attach ferrite cores to your cables. If you want to use REAC cable SC-W100S (sold separately) or Cat5e cable instead of .
14 System Connection Example S-4000S 32x8 (Master REAC device) S-OPT S-OPT S-4000H 8x32 (Slave REAC device) 8 outputs from console 32 mic/line inputs 32 mic/line sources from stage 8 outputs from cons.
15 System Connection Example S-1608 16x8 (Master REAC device) S-0816 8x16 (Slave REAC device) 8 outputs from console 16 mic/line sources from stage 8 outputs from console 16 mic/line inputs S-OPT S-OP.
16 Specifications S-OPT: REAC OPTICAL CONVERTER * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
For EU Countries For China.
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Een belangrijk punt na aankoop van elk apparaat Roland S-OPT (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Roland S-OPT heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Roland S-OPT vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Roland S-OPT leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Roland S-OPT krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Roland S-OPT bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Roland S-OPT kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Roland S-OPT . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.