Gebruiksaanwijzing /service van het product CW-50MC van de fabrikant Runco
Ga naar pagina of 36
O WNER ’ S O PERATING M ANUAL CW -43MC CW -50MC Flat Panel Display Monitor with.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION Congratulations on your purchase of the CW -43MC/CW -50MC Plasma display! Y our CW -43MC/CW -50MC will provide you with many years of enjoyment no other plasma can match. It is compatible with current NTSC and P AL systems, as well as DTV standards.
W ARNINGS AND SAFETY PRECAUTIONS CAUTION: T o turn off main power , be sure to remove the plugs from power outlets. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. REMARQUE: Pour mettre l’appareil hors circut, s’assurer de retirer la fiche de la prise d’alimentation.
This equipment has been tested and found to comply with the limits for a Class ‘B’ digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
LIMITED W ARRANTY IMPOR T ANT : RUNCO IS NOT RESPONSIBLE FOR IMAGE BURNS ON ANY DISPLA Y . PLEASE EXERCISE CAUTION WHEN USING A 4:3 IMAGE ON A 16:9 SCREEN. 5 Congratulations on your purchase of a Runco International video product and welcome to the Runco family! W e believe Runco produces “The W orld’ s Finest Home Theater Products”.
6 This Limited W arranty only covers failure due to defects in materials and workmanship that occur during normal use and does not cover normal maintenance.
OPERA TION The Runco CW -43MC and CW -50MC are standalone flat panel plasma displays with outboard V ivixII™ video processing. W ith 1024 x 768 native resolution for the CW -43MC and 1280 x 768 native resolution for the CW -50MC, both are capable of imaging native HDTV .
INPUTS AND CONTROLS 8 1 SPEAKER (R) terminal For connection of an external right speaker . Connect a speaker whose impedance is 8 -16 Ω. 2 COMBINA TION IN/OUT Used when a number of sets are controlled collectively . Use a mini DIN 6 pin cable (straight, fully connected).
9 7 DIGIT AL RGB (INPUT2) (DVI-D jack-non HDCP) Use to connect a computer resolution only . (VESA standard) 8 AUDIO (INPUT2) (Stereo mini jack) Used to obtain sound when INPUT1, INPUT2 is selected. Connect this jack to the audio output connector of the device connected to the plasma display’ s INPUT1 or INPUT2.
CONNECTING THE PLASMA DISPLA Y INPUT 5 DVI SOURCE INPUT (WITH HDCP DECR YPTION): (Digital 480P , 720P , 1080i): Input for set top box or PC with DVI digital output. INPUT 4 COMPONENT INPUT : Component video is the best type of signal that can be used.
FRONT P ANEL 1 . ST A N DB Y In di c a to r This indicator is red during standby mode. The flashing pattern is also used to indicate error messages. 2 . ON In d i c a to r Lights green when the plasma display is operating. When flashing, the indicator is used to indicate error messages.
SDTV -1 SDTV -2 DIGIT AL IN HDTV -2 PC/HDTV -1 POWER ASPECT RA TIO RGB SETUP INFO 1 2 3 4 MENU MAGNIFY SET - + MUTE VOLUME A D G J C F B I K R S Q P E H L, M, N, O REMOTE CONTROL DESCRIPTION 12 A. ASPECT RA TIO Press to change the aspect ratio or geometry of the image.
MENUS for VIDEO NTSC, P AL or DIGIT AL 480P and HDTV INPUT 3 CINEMA W ALL SCREEN SET UP OPTION PICTURE CONTRAST : 0 BRIGHTNESS : 0 COLOR : 0 TINT : 0 SHARPNESS : 0 FACTORY INPUT3 CINEMA W ALL SCREEN SET UP OPTION PICTURE POSITION : 0/ 0 DISPLAY RESET INPUT 3 CINEMA W ALL SCREEN SET UP OPTION PICTURE AUTO POWER OFF : DISABLE COLOR TEMP.
MENUS for VIDEO NTSC, P AL or DIGIT AL 480P and HDTV OSD Menus for V ideo NTSC, P AL or Digital 480p & HDTV This menu will appear only when displayed for video. 4. OPTION T ab The OPTION menu has selection for optional functionality of the panel: • LANGUAGE allows selection of the desired language and what language will be set in the memory .
INPUT 1 CINEMA WALL SCREEN SET UP OPTION PICTURE CONTRAST : 0 BRIGHTNESS : 0 R. ADJUST : 0 G. ADJUST : 0 B. ADJUST : 0 H. SHARPEN : 0 V. SHARPEN : 0 FACTORY INPUT1 CINEMA W ALL SCREEN SET UP OPTION PICTURE POSITION : 0/ 0 FREQ.
INPUT 3 INST ALLER ADJUST PICTURE CONTRAST : 128 BRIGHTNESS : 128 COLOR : 64 TINT : 30 SHARPNESS : 8 WHITE BAL. SCREEN SET UP OPTION INPUT 3 INST ALLER ADJUST PICTURE R. GAIN : 128 G. GAIN : 128 B. GAIN : 128 R. OFFSET : 128 G. OFFSET : 128 B. OFFSET WHITE BAL.
INPUT 3 INST ALLER ADJUST PICTURE GAMMA : 2.0 BRT. ENHANCE : OFF SUB VOLUME : 20 WHITE BAL. SCREEN SET UP OPTION INPUT 3 INST ALLER ADJUST PICTURE OSD FRONT INDICATOR : OFF FAN CONTROL : AUTO COLOR MODE : NORMAL RUNCO PRO FRC : MODE1 WHITE BAL. SCREEN SET UP OPTION INPUT 3 INST ALLER ADJUST PICTURE PDP PROTECTION SCREEN MASK : OFF SIDEBAR ADJ.
ASPECT RA TIOS 18 There are four aspect ratios available that can be selected for video signal inputs. 16:9 Screens: • ANAMORPHIC: The image is compressed vertically , but anamorphic software will appear properly proportioned. This is best suited for use with 16:9 DVD’ s.
RS-232C ADJUSTMENT MODE 19 Through the unit’ s RS-232 terminal, it is possible to use the PC to make various adjustments and settings. 1) About the RS-232C Adjustment Mode • Adjustments in the RS-232C adjustment mode: - The adjustments are written to the same memory area as for the installer mode.
20 1) Connector: D-sub 9 pins (male) 2) Pin Layout: Interface Pin No. Signal 1 NC (not connected) 2 TxD (T ransmit Data) 3 RxD (Receive Data) 4 NC (not connected) 5 GnD 6 NC (not connected) 7 NC (not .
21 6) Protocol: Fr om computer to plasmas display: (1) When sending one command at a time: STX (02 hex) ID (2 Byte) COMMAND (3 Byte or 6 Byte) ETX (03 hex) COMMAND: 3 Byte (ASCII) ARGUMENT: 3 Byte (ASCII) (2) When transmitting commands in batches (up to max.
22 Command Name Full Name RS-232C Adjustment V alidity Normal V alidity Numerical Direct V alidity Description A AJN - ● T erminates the RS-232C installer adjustment mode. AJY ADJUST : ON ● Starts the RS-232C installer adjustment mode. AMN AUDIO MUTING: OFF ● ● T urns audio mute OFF .
23 Command Name Full Name RS-232C Adjustment V alidity Normal V alidity Numerical Direct V alidity Description C CTP COLOR TEMP: ******** ● Displays the current COLOR TEMP . CTPS01 COLOR TEMP .: 1 ○ Sets the COLOR TEMP . to LOW (equal to -3000K) CTPS02 COLOR TEMP .
Command Name Full Name RS-232C Adjustment V alidity Normal V alidity Numerical Direct V alidity Description F FMK SCREEN MASK: ##### ● Displays the current SCREEN MASK setting.
25 Command Name Full Name RS-232C Adjustment V alidity Normal V alidity Numerical Direct V alidity Function L LEN FRONT INDICA TOR: OFF ○ T urns OFF the front indicator . LEY FRONT INDICA TOR: ON ○ T urns ON the front indicator . LNN LOUDNESS: OFF ○ ○ Disables LOUDNESS.
26 * NOTE: Make sure to use commands for adjusting sub-volume (SV1~5) after rst switching to the prescribed input using the input switching commands (IN1~5). Command Name Full Name RS-232C Adjustment V alidity Normal V alidity Numerical Direct V alidity Function P PLN BRT .
27 Command Name Full Name RS-232C Adjustment V alidity Normal V alidity Numerical Direct V alidity Function U UPO # ○ ○ Adds 10 to the adjustment value. UPn # ○ ○ Adds n to the adjustment value (n = 1 to 9). UPF # ○ ○ Sets the adjustment value to maximum.
28 GET Commands What are GET Commands? • They are commands for outputting TXD such as adjustment data from the internal microcomputer of the plasma display to a PC. • Adjustment data, etc., is output in ASCII code. NOTE: Command names are given inside brackets < >.
29 2) <GPI> (GET PICTURE DA T A: Gets installer/Picture data.) Order Data Contents Size Remarks 1 CONTRAST 3byte # 2 BRIGHTNESS 3byte # 3 C. DET AIL R (RED) 3byte # 4 C. DET AIL Y (YELLOW) 3byte # 5 C. DET AIL G (GREEN) 3byte # 6 C. DET AIL C (CY AN) 3byte # 7 C.
5) <GSS> (GET ST A TUS SETUP: Gets menu and installer SETUP data.) Order Data Size Output Remarks 1 GAMMA 1byte 1: GAMMA 2.0 2: GAMMA 1.8 3: GAMMA 2.2 4: DRE MID 5: DRE HIGH 6: DRE LOW 7: HIGH CNT . # 2 BRT . ENHANCE 1byte 0:OFF 1: ON # 3 SUB VOLUME 2byte 00 to 20 4 COLOR TEMP .
6) <GSO> (GET ST A TUS OPTION: Gets menu and installer OPTION data.) Order Data Size Output Remarks 1 ENERGY MODE 1byte 1: ST ANDARD 2: MODE 1 3: MODE 2 4: MODE 3 5: AUTO 2 ORBITER 1byte 0:OFF 1.
32 DIMENSIONS .
33 .
SPECIFICA TIONS 34 CW -43MC CW-50MC Native Resolution: 1024 x 768 1280 x 768 Screen Size: 43 in. (diagonal) 50 in. (diagonal) Screen Aspect Ratio: 16:9 16:9 A vailable Aspect Ratios: 4:3, Letterbox, 16:9 Anamorphic, V irtualW ide 4:3, Letterbox, 16:9 Anamorphic, V irtualW ide Image Ar ea (W x H): 37 3/8 in.
RUMA-01 1000 1 1-08-04 v2.1 Runco International • Union City , CA 94587 • Ph: 510-324-7777 • Fax: 510-324-9300 • www .runco.com.
Een belangrijk punt na aankoop van elk apparaat Runco CW-50MC (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Runco CW-50MC heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Runco CW-50MC vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Runco CW-50MC leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Runco CW-50MC krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Runco CW-50MC bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Runco CW-50MC kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Runco CW-50MC . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
