Gebruiksaanwijzing /service van het product Expedition EX10 van de fabrikant Samson
Ga naar pagina of 17
® EX10 • EX20 • EX30 O WNERS MANU AL.
Produced by On The Right Wavelength for Samson Technologies Corp. Copyright 2000, Samson Technologies Corp. Printed March 2000 Samson Technologies Corp.
Introduction 3 Welcome to Samson Expedition—the portable audio system for the new millenium! This exceptionally versatile system offers the perfect solution wherever you need portable, high-quality .
Sy stem F eatures The Samson Expedition system uses state-of-the art technology to bring a revolutionary new degree of flexibility and portability to professional audio. Its main features include: • A built-in telescoping handle and locking wheels that make it easier than ever before to transport your audio system.
Sy stem F eatures • The EX30 includes all the features of the EX20, and adds a flexible four-channel stereo mixer that provides two monophonic and one stereo mic/line channels with dual XLR and 1/4" connectors. In addition, separate dual phono connectors allow you to hook up an external cassette or CD player.
Expedition EX10 Guided T our 1: 1/4" input - Use this standard 1/4" connector to connect signal from a power amplifier (rated at up to 250 watts into 8 ohms) to the EX10. 2: Speakon™ input - Alternatively, you can use this Speakon ™ connector to connect signal from a power amplifier (rated at up to 250 watts into 8 ohms) to the EX10.
Expedition EX10 7 SAMSON MPL2242 MMPL2242 MPL2242 S E R V O - 2 4 0 SAMSON SAMSON MPL2242 MMPL2242 MPL2242 S E R V O - 2 4 0 SAMSON Using two EX10s in mono: A single mono signal (bus or aux send) is routed from a mixer to a power amplifier.
8 Expedition EX20 Guided T our 1: Input connector - Use this balanced female XLR connector to route line-level signal into the EX20. 2: Output VU meter - This three-segment bar meter shows the EX20 output level.
Expedition EX20 9 ! 0 10 5 ! 0 10 5 SAMSON MPL2242 MMPL2242 MPL2242 ! 0 10 5 ! 0 10 5 SAMSON MPL2242 MMPL2242 MPL2242 Using two EX20s in mono: A single mono signal (bus or aux send) is routed from a mixer to one EX20 ’ s XLR input, and a connection is made between that EX20 ’ s XLR output to a second EX10 ’ s XLR input.
10 Expedition EX30 Guided T our 1: Equalizer - These controls allow you to shape your sound by boosting or cutting the amount of bass (at 100 Hz) or treble (at 10 kHz) by up to 15 dB. A center detent in each knob indicates no boost or cut (that is, flat response).
11 Expedition EX30 5: Insert (sub) connector - This 1/4" connector brings line-level signal in directly before the EX30 power amplifiers. It is normally used to return signal from an optional EX500 subwoofer. 6: Line inputs - Use these 1/4" jacks to connect line-level sources to the EX30.
12 Expedition EX30 15: CD inputs - Connect the outputs of a CD or tape player to this set of dual phono jacks. Signal arriving here returns to stereo channel 3/4.
Expedition EX30 13 Using one EX30 and an EX20 (stereo operation): In this example, microphones are connected to the XLR mic inputs of channels 1 and 2 of an EX30, and a stereo keyboard is connected to.
14 P ositioning and Mounting Instr uctions General P ositioning T ips • Operating a microphone or turntable in front of a speaker is a sure formula for feedback and/or rumble problems, so always place the Expedition in front of any mics or turntables that are being used.
15 P ositioning and Mounting Instr uctions Before fly-mounting, wall-mounting or ceiling-mounting the Expedition, you must first install a Samson MP 1030 mounting bracket to the fly points, as shown i.
16 As shown in the illustration on the left, the top panel of the Expedition EX20 and EX30 provides a prewired compartment that accommodates any of three different Samson wireless receivers: the UM1 or M32 UHF models or the VM1 VHF model. Output signal from a wireless receiver mounted in an EX30 arrives at channel 2 of the onboard mixer.
17 Specifications Power Rating: (@ 8 Ω ) : EX10 250 Watts Program; 400 Watts Max. Peak EX20, EX30 160 Watts LF; 40 Watts HF Frequency Response : (all models) 60 Hz – 15 kHz ± 3 dB Sensitivity: EX10 97 dB SPL @ 1W/1m Crossover Frequency: EX10 2.3 kHz (12 dB Per Octave) EX20, EX30 2.
Een belangrijk punt na aankoop van elk apparaat Samson Expedition EX10 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samson Expedition EX10 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samson Expedition EX10 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samson Expedition EX10 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samson Expedition EX10 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samson Expedition EX10 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samson Expedition EX10 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samson Expedition EX10 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
