Gebruiksaanwijzing /service van het product DCS 400si van de fabrikant Samsung
Ga naar pagina of 32
SAMSUNG DC S 400si SYSTEM June 2001 F ALCON KEYSET USER GUIDE Every effort has been made to eliminate errors and ambiguities in the information contained in this guide. Any questions concerning information presented here should be directed to SAMSUNG TELE- COMMUNICA TIONS AMERICA, 2700 N.
T ABLE OF CONTENTS ABOUT THIS B OOK ..........................................................1 THINGS Y OU SHOULD KNOW ............................2–9 AS SEMBLING Y OUR KEYSET ................................10 ADDING A KEYSET DA UGHTERBOARD MODULE .
Off-Hook V oice Announce ................................................................37 OHVA Block ......................................................................................38 OHVA Reject ...............................................
ABOUT THIS B OOK Y our F ALCON keyset is the most visible part of your telephone system. No matter what model keyset you are using telephone calls are handled the same way . The 28B and 18B keysets have additional conveniences that are not available to 8B keyset users.
3 Y our outside calls will light green on your keyset and red on other keysets. Y ou never lose sight of your calls while they are on hold. They stay right where you put them and are identified with a green flashing light. Some simple rules to remember: • Any steady LED indicates the line or feature is in use.
5 28 BUT TON F ALCON KEYSET Scroll Call 1 Call 2 Message Memory Redial Transfer Speak er HOLD ANS/RLS V olume 1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ 0 OPER FALCON 28B 32 CHARACTER DISPLA Y T wo lines with 16 characters each. TERMINAL STA TUS INDICATOR Used to provide your keyset status.
7 8 BUT TON F ALCON KEYSET Scroll HOLD ANS/RLS 1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ 0 OPER Call 1 Call 2 Message Transfer Speaker VOLUME FALCON 8B 32 CHARACTER DISPLA Y T wo lines with 16 characters each. TERMINAL STA TUS INDICATOR Used to provide your keyset status.
KEYSET DA UGHTER MODULES [28 AND 18 BUTTON KEYSETS ONL Y] Falcon 28 and 18 button keysets can have one of three different types of daugher module installed on them to enhance the operation of the keyset or to provide an additional local port depending on the type of module.
11 ADDING A KEYSET DA UGHTERB OARD MODULE • Place the keyset face down on a flat surface. • Remove the base pedestal by placing your thumbs over the attachment clips and press outward while simultaneously pressing down on the key- set body with your fingertips.
RECALL DIAL TONE Press the NEW button to disconnect your existing call, wait for dial tone and then make a new call on the same line. NOTE: If this button does not appear on your keyset, the FLASH key may be programmed to recall dial tone. SENDING A FLASH While on an outside call, press the FLASH key to send a flash to the tele- phone company .
BUSY ST A TION CALLBACK When you call another station and receive a busy signal: • Press the CBK key or dial 44 . • When the busy station becomes free, your keyset will ring. • Lift the handset or press ANS/RLS to call the now idle station. NOTES: 1.
17 CALL PROCES SING SYSTEM HOLD • When you are connected to any call, press HOLD . The call will flash green at your keyset. If this call appears on a line key at other keysets, it will flash red at those keysets. • T o take the caller off hold, press that key and the green flashing light will go steady green again.
line when the called station hangs up or you can press TRANSFER to return to the outside party . If you wish to send the call to another exten- sion without waiting for the first station to hang up, simply press anoth- er DSS button. OR Press the CALL button or C.
21 FORW ARDING CALLS Y ou may forward your calls to another station, group of stations or an exter- nal telephone number . Program a destination for the type of forwarding you want as detailed below . If you have FWD ALL , FWD BUSY and FWD NO ANSWER keys, press one to turn that forward feature on.
FORW ARD DND T o forward your phone when you activate DND. • Dial 607 plus the extension number or group number . • Receive confirmation tone and hang up. NOTE: 1. If the Hot Keypad feature has been turned off you must first lift the hand- set or press the SPEAKER key before you begin dialing.
25 DIALING FEA TURES SPEED DIALING Y ou can dial a preprogrammed telephone number stored in the system-wide speed dial list of numbers 500–999 or from your personal list of numbers 00–49: • With the handset on-hook, press the MEMORY key or dial 16 .
• The A key is not used. • The B key inserts a flash. • The C key inserts a pause. • The D key is used for pulse to tone conversion. If your system uses rotary (or pulse) dialing C.O . lines, pressing D while entering a speed dial number causes all subsequent digits to be sent as DTMF tones.
29 NOTES: 1. If you make another call, auto-redial is canceled. 2. T o cancel a retry , lift and replace the handset. PULSE TO TONE CHANGEOVER When making an outside call on a dial pulse line, press #. All digits dialed after the # with be sent as tones.
T o retrieve an automatically parked call: • Dial 10 plus the number that was announced. If you have a P AGPK key , press it and dial the number that was announced. If you have a P ARK key , press it and dial the announced orbit number . • Y ou will be connected to the parked call.
33 CONVENIENCE FEA TURES DO NOT DISTURB Use this feature when you want to block calls to your keyset. • While on-hook, press the DND key or dial 401 . The DND key lights steady red to remind you of this mode. • T o cancel DND, press the DND key again or dial 400 .
ANSWERING THE DOOR PHONE When you are programmed to receive calls from a door phone: • Y ou will receive three short rings repeated. • Lift the handset or press ANS/RLS key . Y ou are connected to the door phone. • If an electric door lock release is installed, dial 13 to unlock the door .
• While on-hook, press TRANSFER and then dial 100 . • Dial your four digit station passcode. • Dial 1 to locking outgoing, 2 for locked all calls, or 0 to unlock. • Press TRANSFER to store your selection. NOTE: When your keyset is locked for outgoing, the HOLD key will flash.
• Press the flashing CALL button on your keyset. This will place the orig- inal party on hold and allow you to talk to the announcing party . • T o return to your first party , press the key corresponding to your original call. This will disconnect the OHVA call.
• Redial the new passcode to verify . If successful, you will hear two beeps. Four beeps indicate an incorrect code. Reenter the code again. • Press TRANSFER to store the new passcode.
43 DISPLA Y FEA TURES INTERACTIVE DISPLA Y KEYS The three keys below the display are substitutes for dedicated feature keys and access codes. Pressing one of these keys has the same effect as press- ing a programmable key . These keys are called soft keys as their functions are not fixed.
CALL DURA TION TIMER The system can be set to automatically time outside calls. A few seconds after you dial a telephone number , the timer appears in the display . It appears immediately for incoming calls. The call timer continues for the du- ration of the call.
PERSONAL SPEED DIAL NAMES Each personal speed dial number can have an 11 character name assigned to it. This name is used to select the speed dial bin when you are dialing by directory . • Press TRANSFER and then dial 106 . • Dial the speed dial bin number 00–49 .
INVALID CID INFO This is a message that will be displayed when CID infor- mation is sent on the line but was somehow corrupted. NO CID RECEIVED This is a message that will be displayed when there was no CID information sent on the line.
INQUIRE CID/ANI P ARK/HOLD INFO If you are informed that an incoming call is on hold or has been parked for you, you may view the Caller ID information before you retrieve the call. This may influence how you choose to handle the call. From an idle keyset: • Press the INQUIRE key , OR Press the CID key and then the INQUIRE soft key .
Press SCROLL and then press STORE to save this number in a person- al speed dial bin. NOTES: 1. Each keyset defaults with ten review bins. Please see your system ad- ministrator to determine the number of bins assigned to your keyset.
64 BUT TON MODULE WITH KEYSET The 64 button module is used when you need more programmable keys added to your keyset. The 64 red LED’s provide visual indication of calls and features. The extra programmable keys are used exactly like the ones on your keyset.
57 PERSONAL SPEED DIAL NUMBERS CODE NAME TELEPHONE NUMBER 25 _________________________ _________________________ 26 _________________________ _________________________ 27 _________________________ ___.
Een belangrijk punt na aankoop van elk apparaat Samsung DCS 400si (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung DCS 400si heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung DCS 400si vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung DCS 400si leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung DCS 400si krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung DCS 400si bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung DCS 400si kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung DCS 400si . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
