Gebruiksaanwijzing /service van het product HP-P5071 van de fabrikant Samsung
Ga naar pagina of 116
Owner ’ s Instructions HP-P5071 This device is a Class B digital apparatus..
2 Impor tant W arranty Information Regarding T elevision Format V iewing User Instructions W ide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.
3 General Information Y our New Plasma Display Panel ......................6 Remote Control Buttons ..................................8 W all Installation Instructions ..........................10 Installing the Speakers ..............................
.
PLASMA DISPLA Y P ANEL General Information Y our New Plasma Display Panel ......................................................6 Remote Control Buttons ..................................................................8 W all Installation Instructions .
Front Panel Y our New Plasma Display Panel 6 Checking Accessories Owner’ s Instructions (BN68-00645A) Once you have unpacked your PDP , check to make sure that you have all the parts shown here.
7 Rear Panel Side of the TV Œ DVI INPUT (DVI-D / L-AUDIO-R) Connect to the digital video and audio output jack of a device with DVI output. ´ MONITOR OUT (VIDEO / L-AUDIO-R) Outputs for external devices. ˇ PC INPUT (RGB IN / AUDIO) Connect to the video and audio output jack on your PC.
Remote Contr ol Buttons Œ POWER button Tu r ns the PDP on and off. ´ ASPECT button Press to change the screen size. ˇ Number buttons ¨ +100 button Press to select channels over 100. For example, to select channel 121, press “+100”, then press “2” and “1.
¸ SRS TSXT button Selects T rusurround XT mode. ˛ MTS button Press to choose stereo, mono or Separate Audio Pro- gram (SAP broadcast). ◊ AUTO PROG. button The TV automatically cycles through all of the avail- able channels and stores them in memor y .
W all Installation Instructions This wall mount bracket installation guide is for the following models:HP-P5071 1 Do not install the PDP on any location other than a vertical wall. 2 To protect the perfor mance of the PDP and prevent problems, avoid the following locations: • Do not install next to smoke and fire detectors.
1 The wall mount comes packaged in 3 parts. These par ts must be assembled together . Please tighten the captive screw in the direction of the arrow after assembling the bracket. Install the W all Mount Bracket after the screws are securely inser ted into the wall.
1 Remove the screws from the back of the PDP . 2 Connect insulation holders to screws (see the illustration below). • If you are uncertain about installation, hire a specialist to install the wall mount bracket.
13 Note • Contact an authorized technician when installing the wall attachment panel. • After hanging the PDP panel on the wall attachment panel, make sure that the Insulation holders are completely hung. • Be careful not to get your fingers caught during installation.
Installing the Speakers This speaker installation guide is for the PSN5040 (BN96-00712A) speakers. The speakers are sold separately . 14 Parts How to Assemble the Speakers (Standing) 2EA 1EA 1EA Speak.
15 Screw ② 2 Set the Speaker Guide Bracket into the square grooves located on either side of the PDP’ s bottom rear , then push the Speaker Guide Bracket towards the center (as the arrow illustrates). Secure the Speaker Guide Bracket with provided screws @ .
Installing the Speakers 16 How to Assemble the Speakers (W all Mount) 1 Remove the screws indicated on the rear of the PDP (6 screws on the left and right sides, 2 screws on the center).
17 3 Secure the Speaker Dust Cover by setting it into the grooves located on the front side of the speakers. 4 Connect the speakers to the PDP using the speaker cables. The connection terminals are on the rear side of both the PDP and the speakers. (Match the color coded terminals and cables.
➤ ➤ T wo or more people should carr y the PDP . Never lay the PDP on the floor because of possible damage to the screen. Always store the PDP upright.
PLASMA DISPLA Y P ANEL Connections Connecting VHF and UHF Antennas ..............................................20 Connecting Cable TV ....................................................................21 Connecting a VCR ...........................
Connecting VHF and UHF Antennas 20 Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. 1 Plug the antenna lead into the VHF/UHF terminal on the PDP . Use the Antenna Cable, an accessor y included in the product package.
21 Connecting Cable TV Y ou can connect different cable systems to your PDP , including cable without a cable box, and cable with a cable box that descrambles some or all channels. Cable without a Cable Box 1 Plug the incoming cable into the VHF/UHF terminal on the PDP .
22 Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter , an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store). 1 Find and disconnect the cable that is connected to the ANTENNA IN terminal of your cable box.
23 Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack S-Video Cable Audio Cable V ideo Cable Power Plug Connect the Video/Audio cables between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the PDP and VIDEO or S-VIDEO / L - AUDIO - R jacks on the VCR.
24 Connecting a Camcorder Audio Cable V ideo Cable Power Plug Connect a Video/Audio cable between the VIDEO / L - AUDIO - R jacks on the PDP and the VIDEO/AUDIO OUTPUT jacks on the camcorder . Viewing T apes 1. T ur n on your PDP . 2. Press the SOURCE button to select “V ideo(A V1, A V2 or A V3)”.
25 Connecting a DVD Player (480i, 480p) This PDP displays the optimum picture in 720p mode. Playing DVD Audio Cable V ideo Cable Power Plug Connect a Video Cable between the Y , P b , P r (COMPONENT1, 2) input jacks on the PDP and Y/P B /P R output jacks on the DVD player .
Connecting a DTV Receiver (480p, 720p, 1080i) This PDP displays the optimum picture in 720p mode. 26 W atching DTV V ideo Cable Audio Cable DVI Cable or Power Plug Connect the cable or antenna to the antenna input jack on the DTV .
PLASMA DISPLA Y P ANEL Operation Tu r ning the PDP On and Off ..........................................................28 Plug & Play Feature ......................................................................30 Memorizing the Channels........
Tu rning the PDP On and Off 28 Tu rning the PDP On and Off Press the POWER button on the remote control. The PDP will be turned on and you will be ready to use its features.
29 Displaying Status Information Press the INFO button on the remote control. The PDP will display the Picture mode, Sound mode, MTS, Caption, and Clock.
30 Plug & Play Feature When the television is initially powered ON, several basic customer settings proceed automatically and subsequently . The following settings are available. 1 If the television is in Standby mode, press the POWER button on the remote control.
5 Select the correct signal source (Air , STD, HRC and IRC), then press the ENTER button. 6 To start the channel search, press the ENTER button. 7 Press the ENTER button. Press the œ or √ button to move to the Hour , Minute, or am/pm. Set the Hour , Minute, or am/pm by pressing the ▲ or ▼ button.
32 Plug & Play Feature (continued) If you want to reset this feature... 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Miscellaneous”, then press the ENTER button.
33 Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the PDP (i.e., an antenna or a cable system). 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
34 Storing Channels in Memor y (Automatic Method) 1 First, select the correct signal source (Air , STD, HRC and IRC). See steps on previous page. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER button.
35 Adding and Erasing Channels (Manual Method) First, press the CH or CH button or the number buttons to select the channel you want to add or delete. 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
36 To View Memorized Channels (PIP Mode) 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Scan”, then press the ENTER button. Only the memorized channels are chosen.
37 Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press the CH or CH button, the PDP changes channels in sequence. Y ou will see all the channels that the PDP has memorized. (The PDP must have memorized at least three channels.
38 Setting Up Y our Remote Contr ol This PDP's remote control can operate almost any VCR, cable box or DVD. After it has been set up properly , your remote control can operate in four different modes :TV , VCR, Cable, DVD or STB.
39 Remote Control Codes VCR Codes Cable Box Codes DVD Codes.
40 Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the ENTER button to select “Source List”.
Assigning Names to External input mode 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the ▲ or ▼ button to select “Edit Name”, then press the ENTER button.
.
PLASMA DISPLA Y P ANEL Picture Contr ol Customizing the Picture ................................................................44 Using Automatic Picture Settings ....................................................45 Selecting the Color T one ......
Customizing the Picture Y ou can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color , and T int settings of your PDP . 44 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
45 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the ▲ or ▼ button to select “Dynamic”, “Standard”, “Movie”, “Custom” picture setting.
46 Selecting the Color T one 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Color T one”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Cool2”, “Cool1”, “Normal”, “W arm1” or “W arm2”.
DNIe (Digital Natural Image engine) Samsung’ s New T echnology brings you more detailed images with contrast, white enhancement and 3D noise reduction. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
48 Changing the Screen Size Screen size selection depends on the type of video input(DVD, PC etc.). 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Size”, then press the ENTER button.
49 Notes • In TV , VIDEO, S-VIDEO and Component (480i) modes, all screen modes can be selected. (16:9 ➞ Panorama ➞ Zoom ➞ 4:3). •I n PC/DVI mode, only 16:9 & 4:3 modes can be selected. • In Component (480p, 720p. 1080i) modes, Panorama mode can’t be selected.
50 Still Press the STILL button on the remote control to freeze a moving picture. Press again to cancel. Freezing the Picture.
Selecting the PIP Screen 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ENTER button, then press the ▲ or ▼ button to select “On”.
Selecting an External Signal Y ou can use PIP to view a signal from an external source, such as a VCR. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
53 Swapping the Contents of the PIP and Main Image 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Swap”, then press the ENTER button.
54 Changing the Size of the PIP Window 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Size”, then press the ENTER button.
55 Changing the Location of the PIP Image 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Position”, then press the ENTER button.
56 Selecting a Signal Source (Antenna or Cable) for PIP If the PIP source is TV while PIP is ON, you can select a different broadcasting source for the PIP picture from the main picture. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
57 57 Changing the PIP Channel 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
58 Setting the MCC(My Contr ol Color) Mode MCC (My Color Control) Modes: MCC allows users to adjust colors to according to their preferences, by adjusting skin, sky , and grass tones using the predefined settings (Standard, Custom, T urkish Blue, Emerald Green, Indian Pink) without affecting other colors on the screen.
59 59 MCC Mode Characteristics Using MCC Mode, you can enjoy vivid colors as shown below . Note •I mages shown above may differ from the actual adjustment on the screen. These images are presented for illustrative purposes. ➤ ➤ Standard Picture.
60 Setting the MCC(My Contr ol Color) Mode MCC Custom Settings Users can adjust the 3 MCC colors (Skin, Sky , and Grass T ones). 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “MCC”, then press the ENTER button.
61 61 Resetting the MCC Colors to the Factor y Defaults To return to the factor y default settings for MCC colors, use the Reset function. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “MCC”, then press the ENTER button.
.
PLASMA DISPLA Y P ANEL Sound Contr ol Customizing the Sound ................................................................64 Using Automatic Sound Settings ....................................................65 Choosing a Multi-Channel Sound (MTS)Soundtrack .
64 Customizing the Sound 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Custom”, then press the ENTER button. 3 Select the option (volume, balance, equalizer) to be adjusted by pressing the œ or √ button.
65 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the ▲ or ▼ button to select “Standard”, “Music”, “Movie”, “Speech” or “Custom” sound setting, then press the ENTER button.
66 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “MTS”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Mono”, “Stereo” or “SAP”, then press the ENTER button.
67 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Auto V olume”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “On”, then press the ENTER button.
68 Setting the T ruSurr ound XT Tr uSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. T rusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers.
Listening to the Sound of the Sub(PIP) Picture When the PIP feature is activated, you can listen to the sound of the sub picture. 69 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
70 Selecting the Internal Mute The internal speakers can be muted in order to hear sound from external speakers you've connected. 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Internal Mute”, then press the ENTER button.
PLASMA DISPLA Y P ANEL Channel Contr ol Fine T uning Channels ....................................................................72 LNA (Low Noise Amplifier) .
Fine T uning Channels Use fine tuning to manually adjust a particular channel for optimal reception. 72 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Fine T une”, then press the ENTER button.
73 LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
.
PLASMA DISPLA Y P ANEL Connecting a PC and Operation Connecting a PC ..........................................................................76 Adjusting the PC Screen ................................................................80 Changing the Position of the Image .
Connecting a PC Connection to a Macintosh computer may require an adapter . 76 To watch the PC screen: 1. T ur n on your PDP . 2. Press the SOURCE button on the remote control or SOURCE button on the front panel to select “PC”. 3. T ur n on your PC and check for PC system requirements.
77 Pin Configuration D-Sub Cable DVI-D Cable (Digital-Only Connector) • 15Pin Signal Cable (based on protruded pin) Setting up Y our PDP (Plug and Play) Our adoption of the new VESA Plug and Play solution eliminates complicated and time consuming setup.
78 How to Set up Y our PC Software (Windows only) The Windows display-settings for a typical computer are shown below . However , the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card.
79 Notes: Both screen position and size will var y , depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: • The interlace mode is not supported. • The PDP operates abnormally if a non-standard video format is selected.
Adjusting the PC Screen 80 Adjusting the R.G.B Preset: •P ress the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Color Control”, then press the ENTER button.
81 Changing the Position of the Image After connecting the PDP to your PC, adjust the position of the screen if it is not well-aligned. Preset: •P ress the SOURCE button to select “PC.” 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
82 Picture Quality Adjustment Picture Automatic Adjustment Preset: •P ress the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PC”, then press the ENTER button.
83 Coarse Adjustment Preset: •P ress the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PC”, then press the ENTER button.
84 Fine T uning (Fine) Preset: •P ress the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PC”, then press the ENTER button.
85 Information Preset: •P ress the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PC”, then press the ENTER button.
.
PLASMA DISPLA Y P ANEL Time Setting Setting the Clock .......................................................................88 Setting the Sleep T imer ...............................................................89 Setting the T imers ............
Setting the Clock 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “T ime”, then press the ENTER button. 3 Press the ENTER button to select “Clock”, then press the ▲ or ▼ button to select correct hour .
Y ou can set your PDP to automatically turn off after a preset inter val. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “T ime”, then press the ENTER button.
90 Setting the Timers This PDP can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the PDP’ s clock, as described previously . 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
6 Press the √ button to select “Channel”, then press the ▲ or ▼ button to select the channel you want when PDP turns on. 7 Press the √ button to select “V olume”, then press the ▲ or ▼ button to select the volume level you want when PDP turns on.
.
Selecting a Menu Language .....................................................94 Digital Noise Reduction ...........................................................95 Selecting the Film Mode ...........................................................
Selecting a Menu Language 94 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ENTER button to select “Language”. 3 Press the ▲ or ▼ button to select the appropriate language: “English”, “Français” or “Español”.
95 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
96 Selecting the Film Mode On: Automatically senses and processes film signals from all sources and adjusts the picture for optimum quality . Off: Switches off the Film mode. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Color W eakness ” , then press the ENTER button. 3 Press the ▲ or ▼ button to select “On”, then press the ENTER button.
98 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Miscellaneous”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Melody”, press the ENTER button.
99 Setting the Blue Screen If no signal is being received or the signal is ver y weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen“ mode to “Off“.
100 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Miscellaneous”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Fan”, then Press the ENTER button.
101 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “Caption”, then press the ENTER button. 2 Press the ENTER button to select “Caption”. Press the ▲ or ▼ button to turn closed caption on/off, then press the ENTER button.
102 Using the V -Chip The V -Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V -Chip restrictions are set up or changed. Note: When the V -chip feature is activated, the PIP and auto channel program features do not function.
103 How to Enable/Disable the V -Chip 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “V -Chip”, then press the ENTER button. The message “Enter PIN” will appear .
104 How to Set up Restrictions using the “TV guidelines” First, set up a personal identification number (PIN), and enable the V -Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating.
105 5 At this point, one of the TV -Ratings is selected. Press the ENTER button. Depending on your existing setup, a symbol will be selected. (Blank = Unblocked, = Blocked) While “ ” is selected, press the ▲ or ▼ button to block the categor y .
106 How to Set up Restrictions using the MP AA Ratings: G, PG, PG-13, R, NC-17, X The MP AA rating system uses the Motion Picture Association of America (MP AA) system, and its main application is for movies.
107 How to Reset the TV after the V -Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V -Chip will block it. The screen will go blank and the following message will appear: “Excessive rating”. To resume normal viewing, tune to a different channel using the number buttons.
.
PLASMA DISPLA Y P ANEL Appendix Tr oubleshooting ..........................................................................110 Care and Maintenance ..............................................................111 Specifications ......................
110 Tr oubleshooting Problem Poor picture. Y our Remote control does not operate the PDP . The PDP won’t turn on. There is no screen image. The image is too light or too dark. The image is too large or too small. Before you call a ser vice technician, please scan this list of problems and possible solutions.
111 W ith proper care, your PDP will give you many years of service. Please follow these guidelines to get the maximum perfor mance from your PDP . Identifying Problems • Do not put the PDP near extremely hot, cold, humid or dusty places. • Do not put the PDP near appliances that create magnetic fields.
112 Specifications HP-P5071 1257 (W) X 84 (D) X 740 (H) mm / 49.5 (W) X 3.3 (D) X 29.1 (H) inches 59 (W) X 22 (D) X 209 (H) mm / 2.3 (W) X 0.9 (D) X 8.
113 Memo.
Memo 114.
115 Memo.
BN68-00645A-0 1 1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 V alley Road, Suite 201 Mount Arlington, NJ 07856 www .samsungusa.com Samsung Electronics Canada Inc. Samsung Customer Car e 7037 Financial Drive Mississauga, Ontario L5N 6R3 www .
Een belangrijk punt na aankoop van elk apparaat Samsung HP-P5071 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung HP-P5071 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung HP-P5071 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung HP-P5071 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung HP-P5071 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung HP-P5071 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung HP-P5071 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung HP-P5071 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
