Gebruiksaanwijzing /service van het product PPM 42S3 van de fabrikant Samsung
Ga naar pagina of 52
PDP-MONITOR (P LASMA D ISPLA Y P ANEL ) PPM42S3 PPM50H3 PPM63H3 Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference. ON-SCREEN MENUS P ICTURE I N P ICTURE (PIP) VIDEO W ALL MDC (M UL TIPLE D ISPLA Y C ONTROL ) Intended for Commercial Use and Operation BN68-00457B-01_ENG 2003.
2 ENG Wa rning! Important Safety Instructions CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 ENG Important Safety Informations (UL1492) ◆ Read all safety and operating instructions before operating your PDP. ◆ Keep the safety and operating instructions for future reference. ◆ Heed all warnings on the PDP and in the operating instructions.
4 Important Safety Informations (UL1492) (continued) ENG ◆ Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits.
5 Important Safety Instructions (UL6500) ENG ◆ Read these instructions. ◆ Keep these instructions. ◆ Heed all warnings. ◆ Follow all instructions. ◆ Do not use this apparatus near water. ◆ Clean only with dry cloth. ◆ Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
6 FCC Information ENG User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
7 ENG Important Warranty Information Regarding PDP Format V iewing Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.
8 ENG User Instructions ◆ Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma display panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”.
9 ENG DNIe TM ( D igital N atural I mage e ngine) This feature bring you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, much detailed image to you.
10 ENG Contents ◆ F OREWORD ■ Warning! Important Safety Instructions ......................................................... 2 ■ Important Safety Informations (UL1492) ....................................................... 3 ■ Important Safety Informations (UL6500) .
11 ENG Contents (continued) ◆ U SING Y OUR D ISPLA Y ( CONTINUED ) ■ Locking the Control buttons ........................................................................... 31 ■ Setting the MDC ( M ultiple D isplay C ontrol) ....................
12 ENG Y our New Plasma Display Panel Front Panel ➢ The actual configuration on your PDP may be different, depending on your model. SOURCE - External input selection. - Store your settings in the menu. - When the Main menu is displayed on screen, the Main menu is not operated with source key.
13 Y our New Plasma Display Panel ENG ➢ The actual configuration on your PDP may be different, depending on your model. Rear Panel b a d c h g i e f j a) RS232C - IN : Used for the MDC function when connecting PC or RS232C output of another PDP. - OUT : Used for the MDC function when connecting with RS232C input of another PDP.
14 Becoming Familiar with the Remote Control ENG PDP ON NUMERIC BUTTONS VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF ➣ Press it again , or - /+ button to turn the sound back on.
ENG 15 You must insert or replace the batteries in the remote control when you: ◆ Purchase the PDP ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it.
16 ENG Installing the Display on the Wall Attachment Panel Wall Mount Bracket Mounting Kits PPM42S3/PPM50H3: 4 PPM63H3: 6 Plastic Hanger Screws How to Adjust Mounting Angle 1 Secure the PDP to the wall mount bracket. (Please refer to the following instructions.
17 ENG Installing the Display on the Wall Attachment Panel 1 Remove the screws from the back of the PDP. 2 Use the screws and assemble the plastic hanger.
18 ENG Installing the Display V ertically You can install the PDP vertically. (PPM42S3/50H3/63H3 models are available. Other manufacturers do not guarantee a reliably working.
19 ENG Connecting Speakers 1 Remove the screws on the rear of the PDP. 2 Hang the two “T” shaped hangers on the square holes on the rear of the PDP. 3 Tighten the PDP and the speaker bracket using the screws removed from the PDP. ➢ When moving your PDP, do NOT hold the speaker connected to your PDP.
20 ENG Connecting Speakers (continued) Ferrite Cores The ferrite cores are used to attenuate undesired signals. When connecting cables, attach one of these ferrite cores to the cable near the connector.
21 When you start using your PDP for the first time, you must select the language which will be used for displaying menus and indications. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Function .
22 ENG If necessary, select the broadcasting standard which best corresponds to your viewing requirements. 1 Press the MENU button. Result : The options available in the Picture group are displayed. 2 Press the √ button. Result : The Color System is selected.
23 ENG Your PDP has several settings which allow you to control picture quality. 1 Press the MENU button. Result : The options available in the Picture group are displayed. 2 Press the √ button. 3 Press the ▲ or ▼ button to select Adjust . Press the √ button.
24 Color Adjust Move Adjust Store ENG 1 Press the MENU button. Result : The options available in the Picture group are displayed. 2 Press the √ button. 3 Press the ▲ or ▼ button to select Adjust . Press the √ button. Result : The Adjust menu is displayed.
25 ENG Size Wide œ œ √ √ Sel. Store Selecting the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. Result : The options available in the Picture group are displayed. 2 Press the √ button.
26 ENG You can freeze the picture when watching a moving picture simply by pressing the “STILL” button. To return to normal viewing, press it again. ➣ In the PIP mode, the main and sub pictures are stilled at the same time. Freezing the Current Picture You can select the type of special sound effect to be used when watching a given broadcast.
27 ENG The sound settings can be adjusted to suit your personal preferences. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Sound . Result : The options available in the Sound group are displayed.
28 ENG ◆ Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed.
29 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Setup . Result : The options available in the Setup group are displayed. 3 Press the √ button. Result : The Screen Adjust is selected. 4 Press the √ button again.
30 ENG 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Setup . Result : The options available in the Setup group are displayed. 3 Press the √ button. Result : The Image Lock is selected. 4 Press the √ button again.
31 This feature allows you to lock the PDP so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users. 1 Press the MENU button. Result : The main menu is displayed.
32 ENG You can prevent the residual image of the PDP. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Setup . Result : The options available in the Setup group are displayed. 3 Press the √ button.
33 You can get the various display effect with many PDPs. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Setup . Result : The options available in the Setup group are displayed. 3 Press the √ button.
34 ENG 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Setup . Result : The options available in the Setup group are displayed. 3 Press the √ button. 4 Press the ▲ or ▼ button to select Information .
35 ENG You can set the clock so that the current time is displayed. You must also set the time if you wish to use the automatic on or off timers. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Function .
36 ENG Time Clock 11:35 Clock Display œ œ Off √ √ Timer œ œ Off √ √ On Time Volume 10 On Time 06:00 Off Time --:-- Move œ œ √ √ Sel. Store Time Clock 11:35 Clock Display œ œ Off √ √ Timer œ œ Off √ √ On Time Volume 10 On Time 06:00 Off Time 23:30 Move œ œ √ √ Sel.
37 ENG You can use the Fan if you are anxious for the PDP. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Function . Result : The options available in the Function group are displayed. 3 Press the √ button.
38 ENG You can display a sub picture within the main picture. In this way you can monitor the video input from any connected devices while monitoring other video input. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select PIP .
39 Easy functions of remote control. Buttons Feature PIP ON Used to activate or deactivate the PIP feature directly. SIZE Used to select a size of sub picture ( Large , Small , Double1 , Double2 ). LOCATE Used to move the sub picture counterclockwise.
40 ENG PIP œ œ On √ √ Sel. œ œ Video √ √ Swap √ √ Size œ œ Large √ √ Locate œ œ √ √ Sound Sel. œ œ Sub √ √ PIP Move Sel. Return During the PIP feature is activating, you can listen to the sound of the sub picture. 1 Press the MENU button.
41 ENG Connecting to the Audio/Video Input The "VIDEO IN" connectors are used for the equipment with an Composite Video output, such as video game devices or video disc players.
42 ENG Connecting to the S-Video Input The S-VIDEO and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Rear of the PDP Camcorder VCR ① To play picture and sound, both the S-VIDEO and RCA connectors must be used.
43 ENG Connecting to the RGB(PC) Input Connecting to the DVI Input The “DVI IN” (video) and “AUDIO” connectors are used for equipment with a DVI output. Personal Computer and Rear of the PDP The “RGB1(PC1) IN” (or “R(Pr)/G(Y)/B(Pb)/H/V”) and “AUDIO” connectors are used for interfacing with your PC.
44 ENG Setting up Y our PC Software (Windows only) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card.
45 ENG Pin Configurations Pin Signal 1T . M .D.S. Data2- 2 T.M.D.S. Data2+ 3 T.M.D.S. Data2/4 Shield 4T . M .D.S. Data4- 5 T.M.D.S. Data4+ 6 Clock (DDC) 7D ata (DDC) 8 Not Connected 9T . M .D.S. Data1- 10 T.M.D.S. Data1+ 11 T.M.D.S. Data1/3 Shield 12 T.
46 ENG Input Mode (PC/DVI) Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: ◆ “ ❉ ” mode does not work with DVI mode. ◆ The interlace mode is not supported.
47 ENG Power Saver (PC1 mode only) This monitor has a built-in power management system called Power Saver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time.
48 ENG Tr oubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the PDP and contact your local dealer.
49 ENG T echnical Specifications Exterior design and product specifications are subject to change without prior notice to improve the performance of this product. This PDP applies to Class B digital device for home use. This PDP has been registered for residential use in terms of EMI.
50 Memo ENG BN68-00457B-01_ENG 2003.10.23 3:21 PM Page 50.
51 Memo ENG BN68-00457B-01_ENG 2003.10.23 3:21 PM Page 51.
ELECTRONICS BN68-00457B-01 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
Een belangrijk punt na aankoop van elk apparaat Samsung PPM 42S3 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung PPM 42S3 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung PPM 42S3 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung PPM 42S3 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung PPM 42S3 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung PPM 42S3 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung PPM 42S3 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung PPM 42S3 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
