Gebruiksaanwijzing /service van het product SP46L5HX van de fabrikant Samsung
Ga naar pagina of 68
COLOUR TELEVISION SP43L2HX SP50L2HX SP61L2HX SP46L5HX SP56L5HX Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference.
2 ENG S afety Instructions ◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions. ◆ Do not expose the television to direct sunlight and other sources of heat. ◆ Do not expose the television to any liquids.
3 ENG Contents ◆ F OREWORD ■ Safety Instructions ......................................................................................... 2 ■ Caution ..............................................................................................
4 ENG Contents (continued) ◆ U SING Y OUR T ELEVISION ■ Adjusting the Sound Settings ........................................................................ 37 ■ Adjusting the Volume Automatically ...............................................
5 ENG 1 Use a screwdriver to remove the screw. 2 Remove the Lamp cover. 3 Use a screwdriver to remove the screws securing the Lamp. There are 2 screws: one on the up and one on the down. When the screws have been completely unfastened, they will still be connected to the body of the Lamp.
6 ENG 1 Use a screwdriver to remove the screw. 2 Remove the Lamp cover. 3 Use a screwdriver to remove the screws securing the Lamp. There are 2 screws: one on the up and one on the down. When the screws have been completely unfastened, they will still be connected to the body of the Lamp.
7 ENG Contr ol P anel of Y our T elevision a d c b e f LED Indicators ➢ The actual configuration on your TV may be different, depending on your model.
8 ENG ( :On, :Blinking, :Off) TIMER LAMP STAND BY/TEMP Indication Standby mode. A timer pilot lights when Timer Auto On or Off is selected. Normal operation. Normal operation (when Timer Auto On or Off is selected). Lamp is warming up. The normal picture comes on after 25 seconds.
9 ENG Connection P anel of Y our T elevision ➢ The actual configuration on your TV may be different, depending on your model. b a e d f g i j h S-VIDEO 1 S-VIDEO 2 c ➣ For further details about connection, refer to pages 54~60. a) 75 Ω Coaxial connector for Aerial or Cable Network.
10 ENG To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the 75 Ω coaxial socket on the rear of the television.
11 ENG Connecting A dditional Speak er s You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it.
12 ENG Infrared Remote Contr ol POWER ON/OFF DIRECT CHANNEL SELECTION VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF MENU DISPLAY/ TELETEXT INDEX MOVE TO THE REQUIRED MENU OPTION/ ADJUST AN OPTION VALUE RESPECTIVELY STILL THE MAIN PICTURE ➢ In the PIP mode, the main and sub pictures are stilled at the same time.
13 ENG The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. ➢ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz. 2 Press the “ I ” button (On/Off) on the side of the television.
14 ENG Becoming F amiliar with the Remote Contr ol The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Display the on-screen menu system The following table presents the most frequently used buttons and their functions.
15 ENG When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the television is in Standby mode, press the POWER () button on the remote control. Result : The message Plug & Play is displayed.
16 ENG If you want to reset this feature... 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the † or … button to select Setup . Result : The options available in the Setup group are displayed. 3 Press the ENTER () button. 4 Press the † or … button to select Plug & Play .
17 ENG You can scan for the frequency ranges available to you, (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
18 ENG You can store up to television channels, including those received via cable networks. When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify 1 Press the MENU () b u tton.
19 ENG 7 If you know the number of the channel to be stored, see the following steps. ◆ Press the œ or √ button to select Channel . ◆ Press the † or … button to select C (Air channel) or S (Cable channel). ◆ Press the √ button. ◆ Press the numeric buttons (0~9) to select indicate the required number.
20 ENG ◆ Skipping unwanted channels You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are thus not displayed. All channels that you do not specifically choose to skip are displayed during scanning.
21 ENG This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using ATM. You can delete those channels you do not want to keep. 1 Press the MENU () b u tton. Result : The main menu is displayed.
22 ENG Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the † or … button to select Channel .
23 ENG ◆ Activating the child lock This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme.
24 ENG S electing a Channel by Inf ormation You can display the list of stored channels. 1 Press the CH INFO. button. Result :A list is displayed with the first 5 channels. Two text boxes to the right of the list indicate: ◆ Whether the Teletext feature is available.
25 ENG You can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the † or … button to select Picture . Result : The options available in the Picture group are displayed.
26 ENG Your television has several settings which allow you to control picture quality. 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the † or … button to select Picture . Result : The options available in the Picture group are displayed.
27 ENG 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the † or … button to select Picture . Result : The options available in the Picture group are displayed. 3 Press the ENTER () button. 4 Press the † or … button to select Custom .
28 ENG 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the † or … button to select Setup . Result : The options available in the Setup group are displayed. 3 Press the ENTER () button. 4 Press the † or … button to select Image Lock .
29 ENG Using the Fine T une If reception is weak, you can fine tune a channel manually. 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the † or … button to select Channel . Result : The options available in the Channel group are displayed.
30 ENG Vi e wing the Channel S can Picture 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the † or … button to select Channel . Result : The options available in the Channel group are displayed. 3 Press the ENTER () button.
31 ENG This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, but not noise. This feature is working only weak signal condition, and that is memorized on current channel, additional.
32 ENG S electing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Picture is selected. Result : The options available in the Picture group are displayed.
33 ENG TV If the signal received by your television is weak, you can activate this feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Picture is selected.
34 ENG This feature bring you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, much detailed image to you. DNIe TM technology will fit every signals into your eyes.
35 ENG If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “ Blue Screen “ mode to “ Off “. 1 Press the MENU () b u tton.
36 ENG You can select the type of special sound effect to be used when watching a given broadcast. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the † or … button to select Sound . Result : The options available in the Sound group are displayed.
ENG 37 Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the vol.
38 ENG This mode allows you enjoy Dolby Pro Logic Surround effect fully with only surround speakers are connected to TV. This allows various modes for the main, center and rear speakers to be selected.
39 ENG Surround TV Mode : Pro Logic √ √ Center : 0dB √ √ Rear : 0dB √ √ Time Delay : 20ms √ √ Test Tone : Off √ √ Move œ œ √ √ Adjust Return A djusting Y our Dolby P references The following Dolby settings can be adjusted to suit your personal preferences.
40 ENG This feature allows you can adjust to suit your personal preferences when the equipment with output is connected to the television. 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the † or … button to select Sound .
41 ENG S electing the Sound Mode (depending on the model) The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual-I ” or “Stereo”, depending on the current transmission.
42 ENG You can hear clear melody sound when the television is powered on or off. 1 Press the MENU () b utton. Result : The main menu is displayed. 2 Press the † or … button to select Setup . Result : The options available in the Setup group are displayed.
43 ENG You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the † or … button to select Setup . Result : The options available in the Setup group are displayed.
44 ENG You can set the television’s clock so that the current time is displayed by pressing the “INFO ( )” button. You must also set the time if you wish to use the automatic on or off timers. ➣ When pressing the “ I ” button (On/Off) on the front of the television, the clock setting will be reset.
45 ENG You can set the television’s clock and set the On or Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select ◆ Swit.
46 ENG Vi e wing an External Signal S ource Use the remote control to switch between viewing signal from connected equipment, such as VCR, DVD, Set-Top-boxs and the TV source (broadcast or cable) 1 Press the MENU () button. Result : The main menu is displayed.
47 ENG TV You can display a sub picture within the main picture of TV program or external A/V devices. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. 1 Press the MENU () b u tton.
48 ENG 9 Press the † or … button to select Position . Press the ENTER () button. Result : The positions available are displayed. --- 10 Press the † or … button to select Prog. . Select the channel that you want to view through sub picture by pressing the ENTER () button.
49 ENG During the PIP feature is activating, you can listen to the sound of the sub picture. 1 Press the MENU () b u tton. Result : The main menu is displayed. 2 Press the † or … button to select Picture . Result : The options available in the Picture group are displayed.
50 ENG Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram).
51 ENG You can display Teletext information at any time on your television ☛ For Teletext information to be displayed correctly, channel reception must be stable; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service by pressing the P or P button.
52 ENG When you have displayed a Teletext page, you can select various options to suit your requirements. To display... Press the... ◆ Hidden text (reveal) (answers to quiz games, for example) ◆ T.
53 ENG You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result : The current page counter is incremented and the page is then displayed.
54 ENG Connecting to the External Input/Output “AV3” is used for the equipment with an RGB output, such as video game devices or video disc players.
55 ENG Connecting to the D VD Input The RCA connectors are used for equipment with a DVD output. DVD Rear of the TV S-VIDEO 1 S-VIDEO 2 Y / Pb / Pr L / R Connecting to the A udio Outputs The “AUDIO OUT” connectors are used for equipment, such as an audio system or external amplifier (to take full advantage of the Surround sound effect).
56 ENG Connecting to the A udio/V ideo Input The RCA (VIDEO + L-AUDIO-R) connectors are used for equipment such as camcorders, video disc players and some video game devices.
57 ENG Connecting to the PC Input The “PC” (video) and “PC AUDIO (L+R)” connectors are used for interfacing with your PC. Personal Computer and Rear of the TV S-VIDEO 1 S-VIDEO 2 Connecting to the D VI Input The “DVI” (video) and “PC AUDIO (L+R)” connectors are used for equipment with a DVI output.
58 ENG Se t ting up Y our PC S of tware (Windo ws onl y) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card.
59 ENG Input Mode (PC/D VI) Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: (N: Negative / P: Positive) ◆ The interlace mode is not supported.
60 ENG Pin PC IN 1 Red (R) 2 Green (G) 3 Blue (B) 4 Grounding 5 Grounding (DDC) 6 Red (R) Grounding 7G reen (G) Grounding 8 Blue (B) Grounding 9 Reserved 10 Sync Grounding 11 Grounding 12 Data (DDC) 13 Horizontal sync. 14 Vertical sync. 15 Clock (DDC) PC Input Connector (15Pin) Pin Signal 1 T.
61 ENG Pr ogramming the Remote Contr ol f or Other Components This TV’s remote control can operate VCR, CATV , DVD, or Set-top box (STB), in addition to controlling the TV. ➣ The remote control might not be compatible with the TV manufactured by another company.
62 ENG Pr ogramming the Remote Contr ol f or Other Components Admiral Aiwa Akai Audio Dynamics Bell&Howell Broksonic Candle Canon Citizen Colortyme Craig Curtis Mathes Daewoo DBX Dimensia Dynatech.
63 ENG Pr ogramming the Remote Contr ol f or Other Components Sylvania Symphonic Tandy Tashika Tatung Teac Technics Teknika TMK Toshiba 021, 025, 036, 056, 059 025 018, 025 006 037 025, 037, 068 021 0.
64 ENG Tr oubleshooting: Before Contacting S ervice Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer.
65 ENG Te c hnical Specif ications The descriptions and characteristics in this booklet are given for information purposes only and are subject to modification without notice.
66 Memo ENG.
67 ENG Memo.
ELECTRONICS BP68-00269A-00 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
Een belangrijk punt na aankoop van elk apparaat Samsung SP46L5HX (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung SP46L5HX heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung SP46L5HX vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung SP46L5HX leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung SP46L5HX krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung SP46L5HX bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung SP46L5HX kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung SP46L5HX . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
