
K EYSET U SER G U I D E
– Australian version –
L CD 24Bi L CD 12B S TD 12B
6B E N H A N C E D

The DCS telephone system has the following pre-set (default) feature access codes. These codes can be used if a key is not available for the feature you want to use. Standard telephone users must always dial these codes.
9 Call attendant or system o p e r a t o r 10 + xxx Retrieve parked calls 1 1 Put calls on and take calls off h o l d 12 +xxx Retrieve calls on hold at another s t a t i o n 1 3 Door lock release 16 + xxx Make speed dial calls 1 7 Save number and redial it 1 8 Recall dial tone for new call 1 9 Last number redial 2 x x Extension numbers 3 x x Extension numbers 4 0 0 Cancel Do not Disturb 4 0 1 Set Do Not Disturb 4 1 Set Message No Ring 42 + xxx Cancel message 4 3 Set/return messages 4 4 Busy station/line callback 4 5 Busy station camp-on 4 6 Set up a conference 4 7 Enter account code 4 8 Set programmed station m e s s a g e 4 9 Send flash to outside line 5 0 0 Station hunt group t o 5 2 9 Station hunt group 5 3 + g r p + 0 Out of group 5 3 + g r p + 1 In group
5 4 + z o n e Meet Me Page 55 + 0 Page all internal zones 55 + 1 Page internal zone 1 55 + 2 Page internal zone 2 55 + 3 Page internal zone 3 55 + 4 Page internal zone 4 55 + 5 Page external zone 1 55 + 6 Page external zone 2 55 + 7 Page external zone 3 55 + 8 Page external zone 4 55 + 9 Page all external zones 55 + , All Page 5 6 Meet Me Answer 5 7 Alarm sensor clear 5 8 DISA alarm clear 5 9 Walking class of service 6 0 0 Cancel all call forwarding 601 + xxx Set Forward All Calls 602 + xxx Set Forward Busy 603 + xxx Set Forward No Ans 604 + xxx Set Fwd Busy/No Ans 605 + xxx Set Fwd Follow m 6 5 Directed call pickup 6 6 Group call pickup 6 7 Universal Answer 6 8 1 Voice Dialler 6 8 2 Voice Dialler Record 7 x x Individual line numbers 8 x Line groups 0 Line group 0 (Local)

LCD 24Bi LCD 12B STD 12B
6B ENHANCED KEYSET USER GUIDE
S A M S U N G D I G I TAL COMMUNICATION SYSTEM



P u bl i c ation Info rm at i o n
Samsung Electronics re s e rves the right without prior notice to revise info r- m ation in this publ i c ation for any re a s o n .
Samsung Electronics re s e rves the right without prior notice to make ch a n ge s in design or components of equipment as engi n e e ring and manu fa c t u ri n g m ay wa rra n t .
All rights re s e rve d. No part of this manual may be rep roduced in any fo rm or by any means - grap h i c, e l e c t ronic or mechanical, including re c o rd i n g, t ap i n g, photocopying or info rm ation re t ri eval system - without ex p re s s w ritten permission of the publisher of this mat e ri a l .
Ju n e / 9 8

THINGS YOU SHOULD KNOW
USER ORIENTAT I O N 1 CALL INDICAT I O N 1 S P E A K E R P H O N E 2 HOT KEYPA D 2 VOLUME CONTROLS 2 SYSTEM TO N E S 2 LCD 24B or STD 12B KEYSET LAY O U T
LABELLING PROGRAMMABLE KEYS 4 LCD 12B or STD 12B KEYSET LAY O U T
LABELLING PROGRAMMABLE KEYS 5 LCD 24Bi KEYSET LAY O U T
LABELLING PROGRAMMABLE KEYS 6 6B ENHANCED KEYSET LAY O U T
LABELLING PROGRAMMABLE KEYS 7 ADD-ON MODULE (AOM) LAY O U T
LABELLING PROGRAMMABLE KEYS 8 OUTSIDE CALLS
MAKING AN OUTSIDE CALL 9 ANSWERING AN OUTSIDE CALL 9 UNIVERSAL ANSWER DEVICE 1 0 RECALL DIAL TO N 1 0 SENDING A FLASH 1 0 BUSY LINE QUEUING WITH CALL-BACK 1 0




USER ORIENTAT I O N
DCS telephones are called "keysets." They contain buttons or "keys" that are used to access or activate the many features of your DCS system. The keys with paper designation strips are programmable keys which can be programmed for a specific functions on your keyset that you require. See your System Administrator to get your most frequently used features assigned to your programmable keys.
Lines from the telephone company are "C.O. lines." Calls on these lines are referred to as "outside calls." Your system can have individual C.O. line keys or lines may be assigned to groups. When they are in a group, you access a line by dialling an access code or pressing a programmed button. For example: dial 0 or press the L O C A L key to get a local outside line. Each line in the system is numbered, beginning with 701, then 702, 703, etc.
Direct Station Selection (D S S) keys are programmed to ring specific stations. You can press a D S S key instead of dialing the extension n u m b e r. A D S S key will light red when that station is busy (Busy Lamp Indication). Each extension in the system is numbered, beginning with 201, then 202, 203, etc
DCS provides distinctive ring patterns to your keyset:
The keys on your phone have light emitting diodes (LEDs). Some of these are tri-coloured LEDs that light green, red or amber. Some of the keys can only light red. See telephone layout for details.
Intercom calls, also called internal calls, always appear on your C A L L buttons. They will always light green. You can have up to eight C A L L buttons, but two are recommended.
Outside calls appear on individual line keys if they are assigned. When an individual line is not assigned to its own key, it will appear on a C A L L button. Your outside calls will light green on your keyset and

red on other keysets.
You never lose sight of your calls while they are on hold. They stay right where you put them and are identified with a green flashing light.
Some simple rules to remember:
Pressing the A N S / R L S key will answer or release a call on the speaker phone. Switching from the handset to the speaker phone is easy. Press the S P E A K E R key and hang up the handset. HOT KEYPA D On the DCS, your keysets keypad can be made "live" or "hot" so that it is not necessary to lift the handset or press S P E A K E R before you begin dialing. Calls can be made and features activated by simply dialing the outside line number, line access code, intercom number or feature access code. If the Hot Keypad feature has been turned off, you must first lift the handset or press S P E A K E R before dialing.
DCS keysets use the U P & DOWN keys to adjust the ringer volume while the keyset is ringing, the speaker volume while the speakerphone is in use and the handset volume while you are listening. These three levels will be stored in memory until changed. If background music is turned on at your keyset, the volume keys will also control the level of music. The volume of pages heard through the speaker of keyset can be adjusted during a page announcement by using the volume keys. There are 16 levels for each volume setting. The volume of off-hook ring is controlled by a user- programmable setting.
The system provides several tones to assist you. Some of these tones are already familiar to you.


the vicinity of small metal objects.

LABELLING PROGRAMMABLE KEYS Insert the end of a paper clip into the notch of the clear cover. Push the cover sideways. Lift the cover and remove the designation strip. Label the designation strip. Replace the strip and cover.
32 CHARACTER DISPLAY Two lines with 16 character each. On LCD 24B only
SOFT KEYS Used to activate feature via the display. - LCD 24B only
S C R O L LK E Y Used to scroll through displays.
16 PROGRAMMABLE KEYS WITH TRI-COLORED LIGHTS Used for CALL buttons, intercom calls and many other system features. VOLUME CONTROL KEYS Used to set independent levels for handset, speaker, background music, ring and page volumes.


MEMORY(SPEED DIAL) KEY
DO NOT DISTURB KEY SPEAKER KEY Used to switch call to speakerphone.
8 PROGRAMMABLE KEYS WITH RED LIGHTS Used to call stations directly, for One- Touch dialling and many other system f e a t u r e s .
TRANSFER KEY
PULLOUT DIRECTORY TRAY
M I C R O P H O N E For handsfree operation.
ANSWER/RELEASE KEY

LABELLING PROGRAMMABLE KEYS Insert the end of a paper clip into the notch of the clear cover. Push the cover sideways. Lift the cover and remove the designation strip. Label the designation strip. Replace the strip and cover.
32 CHARACTER DISPLAY Two lines with 16 character each. On LCD 12B only
SOFTKEYS Used to activate feature via the display.- LCD 12B only
S C R O L LK E Y Used to scroll through displays.
8 PROGRAMMABLE KEYS WITH TRI-COLORED LIGHTS Used for CALL buttons,
intercom calls and many other system features. VOLUME CONTROL KEYS Used to set independent levels for handset, speaker, background music, ring and page volumes.


MEMORY(SPEED DIAL) KEY
DO NOT DISTURB KEY
SPEAKER KEY Used to switch call to speakerphone. 4 PROGRAMMABLE KEYS WITH RED LIGHTS Used to call stations directly, for One- Touch dialling and many other system features.
TRANSFER KEY
PULLOUT DIRECTORY TRAY
HOLD KEY
M I C R O P H O N E For handsfree operation.

LABELLING PROGRAMMABLE KEYS At the right edge lift up the plastic cover and remove the designation s t r i p . Label the designation strip and replace. Insert the plastic cover pressing firmly to click place.
32 CHARACTER DISPLAY Two lines with 16 character each.
SOFTKEYS Used to activate feature via the display.


S C R O L LK E Y Used to scroll through displays.
16 PROGRAMMABLE KEYS WITH TRI-COLORED LIGHTS Used for CALL buttons, intercom calls and many other system features.
8 PROGRAMMABLE KEYS WITH RED LIGHTS Used to call stations directly, for One- Touch dialling and many other system features.
SPEAKER KEY Used to switch call to speakerphone.
LAST NUMBER REDIAL KEY
TRANSFER KEY
VOLUME CONTROL KEYS Used to set independent levels for handset, speaker, background
music, ring and page volumes.
M I C R O P H O N E For handsfree operation.

LABELLING PROGRAMMABLE KEYS Insert the end of a paper clip into the notch of the clear cover. Push the cover sideways. Lift the cover and remove the designation strip. Label the designation strip. Replace the strip and cover.
6 PROGRAMMABLE KEYS WITH RED-COLORED LIGHTS Used for CALL buttons, intercom calls and many other system features.


VOLUME CONTROL KEYS Used to set independent levels for handset, speaker, background music, ring and page volumes. TRANSFER KEY
SPEAKER KEY Used to switch call to speakerphone
MICROPHONE For handsfree operation.



RED LED INDICATOR

MAKING AN OUTSIDE CALL
For more information on authorization and account codes, see your System Administrator.
press the flashing button to answer.

To answer calls ringing on a loud ringer dial 6 7 or press the U A k e y.
Press the F L A S H or N E W button to disconnect your existing call, wait for dial tone and then make a new call on the same line.
While on an outside call
BUSY LINE QUEUING WITH C A L L - B A C K
If you receive a busy signal on selecting an outside line.
seconds. If you have set a call back, your C B K key will l i g h t .

MAKING A CALL
VOICE ANNOUNCE MODE When another station calls you, your keyset will sound a brief attention tone and you will hear the caller's announcement.
A U TO ANSWER MODE When another station calls you, your keyset will sound a brief attention tone and then automatically answer the call.
When you call another station and receive a busy signal:

seconds. If you have set a callback, your C B K key will light.
When you call another station and receive a busy signal but you do not want to wait for a callback:

SYSTEM HOLD
To place an outside call on hold at your phone so that other users cannot access it:
If you leave a call on hold longer than the hold timer, it will recall your station. The button that the call appears on will have a slow flashing amber or red light.
When you are talking on an outside line and it is necessary to consult with another extension:
To answer

outside and inside party and internal extension.
To retrieve a line is on hold that does not appear on your keyset,
You may transfer a call to another extension in one of two ways:. A screened transfer allows you to inform the other party who is calling or you can do a blind transfer without notification.
and forth between the parties by pressing the T R S F k e y. 2. You cannot transfer an intercom call by pressing a D S S k e y. You must press the T R S F key and dial the destination extension number. 3. When you are transferring a call to a keyset set for Vo i c e Announce or Auto Answer, the transferred call will always r i n g .
When you are transferring a call to another station and you receive a busy signal, you may camp the call on to this station. Simply hang up when you hear the busy signal. The called party will be alerted that a call is waiting for them.

If an outside call has been camped on to your phone or another station has camped on to you:
You may conference up to five parties (you and four others) with a maximum of 2 external parties (eg. outside lines or remote extensions) in any order.
you are not able to reach the desired person, hang up and press the C O N F key again to return to your previous c o n v e r s a t i o n .
To drop a party from your conference call:
If you wish to leave outside lines connected together in a trunk to trunk conference.

You may forward your calls to another station, group of stations or an external telephone number. If you have FWD ALL, FWD BUSY, and FWD NO ANSWER keys, a steady red light reminds you what forward condition is activated.
To clear all call forwards:
To forward all your calls to another station:
call back to the forwarding station.
To forward calls to another station when you are on the phone:
To forward calls to another station when you do not answer:
If you have both a Forward on Busy destination and a Forward No Answer destination programmed, you may set both of these at the s a m e :

When you want all calls to your extension forwarded to the extension you are now at:
F O RWARD TO AN EXTERNAL N U M B E R To forward outside calls to a number outside of your business, you must have a FWD EXTERNAL button on your keyset.
i n s t r u c t i o n s .
To pick up (answer) a call ringing at another station:
To pick up (answer) a call ringing in any pickup group,
pickup group.

SPEED DIALLING
You can dial a preprogrammed telephone number stored in the system-wide speed dial list of numbers (500-999 for the DCS or 500- 699 for the DCS Compact) or from your personal list of numbers 00- 1 9 :
PROGRAMMING PERSONAL SPEED DIAL NUMBERS To store telephone numbers in your personal speed dial list.
your System Administrator to determine the number assigned to your station.
For the purposes of programming speed dial numbers, the last 6 programmable keys of the right hand row are known as A, B, C, D, E and F and are defined below.

You may assign any speed dial number to an already existing one touch speed dial button for quick and easy dialling of frequently used numbers. (See your System Administrator for details)
To call this telephone number, just press the S P D b u t t o n .
To redial the last outside telephone number you dialled:
To save the number you just dialled for later use:
save another number.
You may manually dial additional digits following a speed dial number or chain as many speed dial numbers together as required:
After the first speed dial number is dialled,

number location OR • Manually dial additional digits after the speed dial number.
When you are making an outside call and you receive a busy signal, The system can automatically redial the number for you. It will automatically redial at a pre-programmed interval for up to 2 attempts or if connected to the ISDN network up to 9 attempts. On hearing a busy signal:
When making an outside call on a pulse (decadic) line:
Voice Dialler gives you the ability to record a voice pattern into a digital format and store it to an addressable location. It allows the calling party to speak a name into the handset and have the system automatically place a call.
Before using the Voice Dial feature:

pronounced Johncitizen). Avoid like names such as Ted and F r e d .

MAKING AN INTERNAL PA G E
To make an announcement through the keyset speakers:
To make an announcement through connected external paging s p e a k e r s :
To page all designated keysets and external speakers at the same t i m e :
need to press PA G E or dial the desired zone. 2. The LED on the PA G E key will only light when an All Page is in progress.

When you have a call for someone who is not at their desk, you can park the call and page the required party:
To retrieve a parked call:
period of time, it will recall your keyset and have a slow flashing amber light. 2. You cannot park and page intercom calls.
To leave a message at another station or station when no one answers or you receive a busy signal:

To cancel a message indication that you left at another station:
return them in any order. See Viewing Message Indications under Display Features. 2. f a message has been left at your keyset by a keyset in Auto Answer mode, you must manually cancel the message light after the message has been returned.

When you will be away from your phone for any length of time, you may leave a programmed station message. Display stations calling you will see this message and be informed of your status or follow your instructions.
No. Messages No. M e s s a g e s 01 In a meeting 11 02 Out on a call 1 2 03 Out to lunch 1 3 04 Leave a message 1 4 05 Page me 1 5 06 Out of town 1 6 07 In tomorrow 1 7 0 8 Return afternoon 1 8 09 On Vacation 1 9 10 Gone home 2 0

DO NOT DISTURB
Use this feature when you want to block calls to your keyset.
have a D N D k e y, your A N S / R L S key will flash to indicate DND status. 2. The system can be programmed so that direct in dial calls will override DND (See you Service Company)
If you are on a call and you do not wish to be interrupted while on that call, you can press the D N D key and place your station in DND. When you end the call the DND will be automatically cancelled.
You can mute the handset transmitter or the microphone during any c o n v e r s a t i o n :
When a music source is supplied, you may listen to music through the speaker in your keyset:

Two types are available TO D AY ONLY or DAILY. You can set up to three alarms for each type.
When the alarm rings, you will hear three short rings repeated three times. Lift the handset to answer the alarm. If you do not, the alarm will alert you two more times at five minute intervals.
To set alarms:
To cancel individual alarms:
Reminder Messages u n d e r Display Features.
When you are programmed to receive calls from a door phone:

CALLING THE DOOR PHONE/ROOM M O N I TO R You may call the door phone and listen to what may be happening outside or in another room.
E X E C U T I V E / S E C R E TA RY HOT LINE
If programmed, an executive and a secretary can have a hot line between them. When the executive station is in the DND mode, all of its calls will ring the secretary station.
When engaged on a call and using the handset, you may want other people to hear the distant party's voice over the speaker:
When equipped with optional Call Management software your SAMSUNG DCS system will allow calls to be charged to a specific a c c o u n t :
press the A C C T key twice and redial the correct code. Only the last account code dialed will be printed.

You can allow/disallow incoming/outgoing calls from your keyset using this option. There are three possible levelst:
indication will be provided: U n l o c k as normal Locked out the HOLD key light will flash slowly. Locked all the HOLD key light will be on steady
Keysets may receive a voice announcement while on another call. The calling station must be a display Keyset or have an O H VA k e y. The O H VA feature will work with all types of call.
To make an off-hook voice announcement:
use the handset to avoid an echo eff e c t . 2. You cannot off-hook voice announce to single line telephones or Keysets in DND.

When you receive an off-hook voice announcement, you will hear the announcement in the handset receiver or over the keyset speaker while continuing to speak to the original party.
To answer the OHVA :
Your keyset can be programmed with an OHVA Block (O H B L K) key. Pressing this key will prevent anyone from making and OHVA to you until you press the button again and cancel the blocking.
Your keyset can be programmed with an OHVA Reject (R E J E C T) k e y. Pressing this key while receiving an OHVA call will disconnect the voice announcement and return you to your original call.
If your keyset is assigned to a station ring group, you can temporarily remove your keyset from the group. While you are out of the group, you can receive calls to your extension number but not calls to the group number.
If you do not have an I N / O U T k e y :

SELECT RING TO N E
Each keyset user can select any one of eight ring frequencies:
At installation, your station passcode is 1234. You can change your station passcode whenever you desire.
You can receive internal calls in one of three modes (see A n s w e r i n g Intercom Calls under Intercom Calls for descriptions):
While on a outside call, pressing a line key, route key or a flashing C A L L button will automatically put your call on hold and connect you to the next call. This feature can be turned on or off at your keyset.

Keyset users can switch between headset mode and handset mode. When using headset mode, press the A N S / R L S key to answer and release calls.
d i s a b l e d . 2. When you place your keyset in headset mode, the A N S / R L S key will light steady to indicate headset mode.
Hot Keypad allows the user to activate features without the need to lift the handset or press S P E A K E R f i r s t To activate this feature.
A short beep (confirmation tone) each time you press a button on the dial pad. This tone can be turned on or off .
Allows keyset users to hear the remaining portion of an ongoing internal page after completing a call. To enable this feature:

This feature sets the keyset to automatically answer ringing calls by lifting the handset or pressing the A N S / R L S k e y. Calls will always be answered in the order they arrived at your keyset. The alternative is to press the flashing button to answer a call allowing you to answer calls in the order you choose.

INTERACTIVE DISPLAY KEYS
The three keys below the display are substitutes for dedicated feature keys and access codes. Pressing one of these keys has the same e ffect as pressing a programmed key. These "soft" keys are context sensitive and their functions change to present you with the best options for a particular call condition.
The S C R O L L key is used to display options available to the user at a particular time or during a specific procedure. Press this key once while in the idle state to view the three main categories available.
A N S W E R: Guides you through the options to answer calls. OTHER : Guides you through features other than making or
answering calls. CALL : Guides you through the options to make a call.
Select one of the main categories: C A L L, O T H E R or A N S ( A N S W E R ). Press the S C R O L L key to display additional options available under each of the three main categories. The symbol -> displayed as the last character on the lower line of the display indicated that there are additional options. Press the S C R O L L key to display these additional options.
User instructions will be displayed in lower case letters. Options assigned to soft keys are in upper case letters.
An 11 character name can be assigned to each extension number. Display keysets can view the name of the called or calling station before answering. The Display will be:
Call from XXX where XXX is the extension no. NAME the calling extensions name
Each outside line can have an 11 character name. Incoming calls can be easily identified and answered with different greetings.

Each station group can have an 11 character name Outside and internal calls ringing to a station group will display [CALL N A M E]. This allows you to answer calls directed to you differently than calls directed to your station group.
Each station or speed dial number can have an associated directory name and can be selected by scrolling alphabetically through the directory name list. This on-line "phone book" allows the user to look up and dial any station or speed dial number in seconds.
To dial by directory:
Display keysets begin showing digits as they are dialled. They will stay in the display until the call duration timer comes on automatically or the T I M E R button is pressed. If the call duration timer is not used, the number dialled is displayed until the call is released, transferred or put on hold.
The system can time outside calls either automatically or manually. Call duration times are displayed in minutes and seconds.
Display keyset users may have the timer automatically start when they answer incoming calls or after a short delay on an outgoing call.

Display phone users may use this feature to time an incoming or outgoing call or as a simple stopwatch.
Display keyset users may have the call charge automatically displayed if metering is available.
VIEWING MESSAGE INDICAT I O N S You can view all your message indications before you return them:
When you use the alarm/appointment reminder feature, you can create a 16 character reminder message. When the alarm rings, The message will appear when the alarm rings. To program reminder messages:

C O U N T 1 2 3 4 5
DIAL 0 ( ) . & 0 DIAL 1 s p a c e ? , ! 1 DIAL 2 A B C @ 2 DIAL 3 D E F # 3 DIAL 4 G H I $ 4 DIAL 5 J K L % 5 DIAL 6 M N O ^ 6 DIAL 7 P Q R S 7 DIAL 8 T U V , 8 DIAL 9 W X Y Z 9 DIAL * : = [ ] ,
The # key can be used for the following special characters: #, space, &, !, :, ?, ., %, $, -, /, [, ], @ , ^, , ), _, +, {, }, ;, |, “ and ~.
key as the previous character, press U P to move the cursor one space to the right.
To cancel an individual alarm and reminder message:
Each personal speed dial number can have a ten character name assigned to it. This name is used to select the speed dial bin when you are dialling by directory. To program speed dial names:

Reminder Messages.
You can assign an 11 character name to your keyset. This allow other display keyset users to call you using the directory dial feature. To program a station name
You can view your key assignments and add extenders to some of your programmed keys for easy one touch operation of frequently used features.
K E Y E X T E N D E R
B O S S Boss and Secretary (1 - 4) D P Direct Pickup (extension or station group
n u m b e r ) D S Any extension or station group number F W R D Call Forward (0 - 5) G P I K Group Pick-up (01 - 20) I G In/Out of Group (501 - 529) M M P G Meet Me Page (0 - 9, ,) PA G E Page (0 - 9, ,) S P D Speed Dial (00 - 49, 500 - 999) F S M G Programmable Message (01 - 20) D I R SYS (0), PERS (1) or STN (2) S P UCD supervise ( UCD group number)

e x t e n d e r.
You can decide if you want to see the CLIP name or CLIP number in the display. Regardless of which one is selected, you can press the N N D key to view the other pieces of CLIP information. To select the CLIP information:
If you have a call waiting or a camped-on call at your keyset, you can press the N E X T key to display the CLIP information associated with the next call.
To view CLIP information: Press the N E X T k e y. If your keyset does not have a N E X T k e y, press the C L I P key and then the N E X T soft key.
At any time during an incoming call that provides CLIP information, you may press the S AV E key to save the CLIP number. If your keyset does not have a S AV E k e y, press the C L I P k e y, the S C R O L L key and then the S AV E soft key.
To redial a number that has been saved:
At any time during an incoming call that provides CLIP information, you may save the CLIP number as a speed dial number in your personal speed dial list.

To store a CLIP number:
INQUIRE CLIP PARK/HOLD INFO If you are informed that an incoming call is on hold or has been parked for you, you may view the CLIP information before you retrieve the call.
From an idle keyset:
If you are on a call:
turned off, you must finish the existing call or place it on hold before inquiring. 2. If you are inquire about an outgoing call, you will receive a [call no longer available] display.

Allows you to review CLIP information for 10-50 calls in a first-in, first- out basis. The list includes calls that you answered and calls that rang your keyset but that you did not answer. When reviewing this list, you can press one button to dial the person back. To access the CLIP information stored in your REVIEW list:
System Administrator to determine the number of bins assigned to your keyset.
When you are making an outside call using LCR and dial an incorrect digit, you can press the CLEAR soft key to cancel the digit and continue dialling the telephone number.
This feature does not operate if you have ISDN connected to your s y s t e m . .

»£¡÷«‚USER- ∫ª πÆ 98.7.16 12:52 PM ∆‰¿Ã¡ˆ42
WITH KEYSET
The add-on module (AOM) is used when you need more programmable keys. The extra programmable keys are used exactly as are the ones on your keyset. Make them DSS/BLF keys, line keys, One Touch Speed Dial buttons or any combination of these and other feature keys. A maximum of two AOMs can be added to any keyset.



Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.