Gebruiksaanwijzing /service van het product AVM-32F4, AVM32F9 van de fabrikant Sanyo
Ga naar pagina of 26
1 Introduction 2 Safety Instructions 3 Location of Controls 4 Remote Control Use 5 Antenna Connection 6 Cable TV(CATV) Connection 7 Video/Audio Connections 8 Basic Operation 10 Basic Menu Operation 11.
3 2 SAFETY INSTRUCTIONS Caution To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be inserted fully to prevent blade exposure. GRAPHICAL SYMBOLS EXPLANA TION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN.
5 4 REMOTE CONTROL USE Point to remote control sensor of the TV set. The maximum operable distance is approximately 20 feet from the remote control sensor, and not more than 30 to either side of center. The operation of the remote control is most effective when there is nothing between it and the remote control sensor.
7 6 CABLE TV (CA TV) CONNECTION A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm coaxial cable to the set, screw the 75-ohm cable to the COAXIAL CABLE CONNECTOR. Some cable TV companies offer "premium pay channels".
9 8 To view a connected video source, press the TV/VIDEO button on the side of the cabinet or VIDEO button on the remote control. (2) Side Input Jacks Please use the side jacks (VIDEO 2) for a GAME-PLAYER or CAMCORDER. To view a connected video source, press VIDEO button to set the TV to the VIDEO 2 mode.
11 10 BASIC MENU OPERA TION 1. Press POWER button to turn the TV on. 2. Press MENU button and move the cursor to " SETUP " option and press VOL + button. The " SET UP " menu is displayed. 3. Press VOL + button to select ANTENNA option.
13 12 SET -UP ANTENNA SELECTION In this mode, you can change the antenna mode between " TV " (If you use a VHF/UHF antenna) and " CATV " (If you have cable connection.) 1. Press MENU button, move the cursor to " SETUP " option and press VOL + button.
15 14 SET -UP MANUAL MEMOR Y (channel add/delete) 1. TO ADD A CHANNEL If you want to add a channel not store during AUTO PROGRAM to the memorized channel follow these steps. Select a channel you want to view by using the number buttons on the remote control.
17 16 SET -UP LNA (Low Noise Amplifier) EFFECTS Set LNA ON to increase a weak incoming signal. However, if you are located in a strong signal area, such as nearby a broadcasting station, and if the picture is distorted, set LNA OFF. 1. Press CH / b ut to n s or use the number buttons to select a channel you want to adjust.
19 18 PICTURE ADJUSTMENT CUSTOM (MANUAL) ADJUSTMENT You can sequentially select and adjust one of five picture properties. Contrast, Brightness, Sharpness , Color, or Tint. Press the MENU button. Move the cursor to PICTURE by pressing the CH / buttons and press the VOL + button.
21 20 SOUND ADJUSTMENT USING ON-SCREEN MENU You can also select a sound setting by using the on-screen menu. Press the MENU button. Move the cursor to SOUND by pressing the CH / buttons and press the VOL + button. Move the cursor to SOUND by pressing the CH / buttons.
23 22 SOUND ADJUSTMENT HEADPHONES Follow these instructions to select the audio source (main screen or PIP channel) that you want to receive through the headphones. If you want to listen to sound from the PIP, make sure that sound from the PIP is being received.
25 24 SOUND ADJUSTMENT SURROUND SOUND SOUND MENU Move the cursor to SOUND by pressing the CH / buttons and press the VOL + button. Move the cursor to SURROUND by pressing the CH / buttons. Press the VOL + button. Whenever this button is pressed, the mode will change as follows.
27 26 SOUND ADJUSTMENT MTS USING SOUND MENU : Press the MENU button. Move the cursor to SOUND by pressing the CH / buttons and press the VOL + button. Move the cursor t o MTS by pressing the CH / buttons. Press the VOL + button. Whenever this button is pressed, the mode will change as follows.
29 28 CLOCK/TIMER ON/OFF TIMER The ON/OFF timer lets you use alarm and automatic off functions. Press MENU button. The " MENU " is displayed on the screen. Move the cursor to TIME by pressing the CH / buttons and press the VOL + button. " TIME " menu is displayed on the screen.
31 30 CLOCK/TIMER ON TIME CHANNEL NUMBER You can select the channel on which the TV turns on as programmed by ON-TIMER. This function will not work if the TIMER is set to OFF or the current time has not been set. 1) Move cursor to ON CHANNEL and press CH / key.
33 32 OTHER FUNCTIONS BLUE BACKGROUND When there is no picture signal or the signal is weak, the screen reverts to a solid blue color. Disable this feature to watch very weak signals.
35 34 In this mode, you can enjoy viewing two programs at the same time. PIP PIP SIZE PIP POSITION PIP SWAP WITH MAIN SCREEN MAIN PIP Press PIP on the remote control. When it is ON, the PIP screen appears in the lower right corner. Press PIP again to clear the PIP screen from the main screen.
37 36 V -CHIP OPERA TION CALLING UP THE BLOCKING MENU WITH YOUR ACCESS CODE 1. Press the MENU button to display the MAIN MENU. 2. Use the CHANNEL / buttons move the cursor to FUNCTION. 3. Use the CHANNEL / buttons to move the cursor to BLOCKING. 4. Press the VOLUME + button.
39 38 MOTION PICTURE RA TING. 39 RATING REMARKS N/A (No rating) Not rated or not applicable program movie has not been rated or ratings do not apply. G (General audience) All ages admitted PG (Parental guidance suggested) Some material may not be suitable for children.
41 40 V -CHIP OPERA TION N/A(No Rating): Not rated or not applicable program. Important note: You have the ability to block all programs which are not rated, but you should be aware that such blocking may have unintended consequences.
43 42 V -CHIP OPERA TION TV-G (General audience): Most parents would find this rating suitable for all ages. Although this rating does not signify a program designed specifically for children, most parents may let younger children watch TV-G programs unattended.
45 V -CHIP OPERA TION CONTENT LABELS TV Parental Guidelines may have one or more letters added to the basic rating to let parents know when a show contains higher levels of potentially, offensive material. Note that the content label should be considered in light of its associated rating.
47 46 V -CHIP OPERA TION TO ACTIV A TE V -CHIP FUNCTION BLOCK 1. Press MENU. 2. Use CH / to select BLOCK. 3. Press VOL+ button to set BLOCK ON. CHANGING THE ACCESS CODE This procedure allows you to choose a private 4 button key combination to the ACCESS CODE.
49 48 TROUBLESHOOTING GUIDE Before requesting service, please refer to the following chart for the symptom and possible solution. For more information, see the corresponding page in this manual. SYMPTOM TV does not operate Make sure the power cord is plugged in.
51 50 LIMITATIONS (a). SANYO Canada Inc. reserves the right to change or improve the design of the model of the product warranted hereunder without incurring any obligation to make any modifications to or to install any improvement in or on the product.
Een belangrijk punt na aankoop van elk apparaat Sanyo AVM-32F4, AVM32F9 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sanyo AVM-32F4, AVM32F9 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sanyo AVM-32F4, AVM32F9 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sanyo AVM-32F4, AVM32F9 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sanyo AVM-32F4, AVM32F9 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sanyo AVM-32F4, AVM32F9 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sanyo AVM-32F4, AVM32F9 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sanyo AVM-32F4, AVM32F9 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
