Gebruiksaanwijzing /service van het product DMP-M600 van de fabrikant Sanyo
Ga naar pagina of 23
-1- Digital Memory Player DMP-M600 DMP-M700 V ersion 1.01 Instruction Manual.
-2- Accessories USB cable Headphones Strap Contents Accessories ..................................................................................................................................................................... 2 Precautions .......
-3- - The apparatus shall not be exposed to dripping or splashing. - Do not drop the player or subject it to strong shocks. - Do not use where there are extremes of temperature (below 5 ° C or exceeding 35 ° C). - IBM and PC/AT are registered trademarks of International Business Machines Corporation.
-4- Controls 1. Built-in microphone 2. Necklace connection hole 3. Headphones socket ( ) 4. Power, Play/Stop, Skip/Search, Select/Set button ( f , a , e POWER) 5. Volume buttons (+ VOL –) I/O 4 3 2 1 5 6 7 10 9 8 6. Mode/Menu button (MODE) 7. Reset switch (RESET) 8.
-5- Selecting the action Windows is to take (Windows XP only) After connection, the following screen will appear. Example: Adjust your settings to match your PC ’ s environment. In this manual, [Take no action] is selected, [Always do the selected action] is checked, and [OK] is clicked.
-6- How to install the MusicFileMaster software - Reproduction of this software is forbidden. - This software shall not be copied and reprinted. - SANYO shall not be liable for any damages arising out of the use of this software. - The screen shots are of Windows XP.
-7- Installing the MusicFileMaster software 1. In the step 2 on the previous page, click [Removable Disk (F:)] > [MusicFileMaster] folder. 2. Double click [Setup.exe] in [MusicFileMaster] folder. [InstallShield Wizard] screen appears. Click [Next].
-8- Disconnecting the player from your PC Before disconnecting, make sure no data is being transferred. For Windows 98SE: Disconnect the player from your PC. For Windows XP/2000/Me: 1. Right-click the Task tray icon at the bottom right of the Windows screen.
-9- An icon [Removable Disk] will appear in My Computer in Windows when the player is connected to your PC. [MUSIC] folder Files transferred from your PC are stored in this folder. - There is no set format for file names for files which are transferred, but they must be MP3 or WMA files.
-10- MusicFileMaster You can select music files on your hard disk and manage them using MusicFileMaster, by reading them into the application. MusicFileMaster enables you to transfer music files to your portable device, and manage the transferred music files.
-11- T ransferring data by MusicFileMaster Start up the MusicFileMaster (refer to page 10). Transferring data to the player After selecting [Help] menu > [Table of Contents], click [Basic operations] > [Transferring music files to portable device] of the [Portable device].
-12- T ransferring data using the Media Player If you have the Microsoft Windows Media Player installed, you can transfer WMA files to the player and listen to them. See the Windows Media Player on-line help for details on how to do this. Note: - Never disconnect the player from your PC during transfer.
-13- Selecting the function 1. In the stop mode, press [MODE] (for at least 2 seconds). The first stage menu appears. 2. Press [ a ], then move [ a ] right ( e ) or left ( f ) to select the desired function ( “ ” , “ ” or “ ” ) and press [ a ] again.
-14- Play music First, select “Music” function (refer to the previous page). 1. In the stop mode, press [MODE] (for at least 2 seconds). The first stage menu appears. 2. Move [ a ] right or left to select “ Music Setting ” . 3. Press [ a ]. “ SOUND EQ ” appears.
-15- ALL RANDOM ONE MUSIC Selecting the repeat/random playback Only for files in the MUSIC (or FM) folder: 1. In the stop mode, press [MODE] (for at least 2 seconds). The first stage menu appears. 2. Move [ a ] right or left to select “ Music Setting ” .
-16- (Valid only for music files transferred by MusicFileMaster.) ALL : Selects all the music files. ARTIST : Selects the music files by artist name. ALBUM : Selects the music files by album name. GENRE : Selects the music files by genre name. PLAYLIST : Plays the music files in the playlist.
-17- Recording voice First, select “Voice” function (refer to page 13). Recording time The recording time differs as shown below. (When [MusicFileMaster] and [Manual] folders are deleted) Recording mode Recording time (approx.) DMP-M600 HQ: High-quality 8 hr.
-18- Listening to the FM radio Important note: When listening to the radio, you must connect the headphones. The headphones serve as an FM aerial. First, select “FM” function (refer to page 13). - If a radio frequency is not displayed; press [ a ], then move [ a ] right or left to select “ LISTEN FM ” and press [ a ].
-19- Erasing Erasing a file First, select the function (Music, FM or Voice) which has the file to be erased. 1. In the stop mode, press [MODE] (for at least 2 seconds). The first stage menu appears. 2. Move [ a ] right or left to select “ CommonSetting ” .
-20- Menu setting Common procedures of menu setting 1. In the stop mode, press [MODE] (for at least 2 seconds). The first stage menu appears. 2. Move [ a ] right or left to select the first stage menu, then press [ a ] to confirm the menu.
-21- Function Selecting the function : Music function : FM function : Voice function Music Setting SOUND EQ: Setting up the sound equalizer POP: Pop ROCK: Rock JAZZ: Jazz NOR: Normal (Deactivates the .
-22- T roubleshooting guide WHAT TO DO IF... If the operation of the player or display is not normal, 1. Press [RESET] using a clip, etc. 2. Resume operation. This operation should not be performed under ordinary circumstances. I/O Symptom Possible cause Corrective action The player does not start.
-23- Cleaning the cabinet Clean the outside of the player with a clean soft cloth, moistened with lukewarm water. Do not use benzene, thinner or alcohol since they will mar the finish of the surfaces.
Een belangrijk punt na aankoop van elk apparaat Sanyo DMP-M600 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sanyo DMP-M600 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sanyo DMP-M600 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sanyo DMP-M600 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sanyo DMP-M600 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sanyo DMP-M600 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sanyo DMP-M600 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sanyo DMP-M600 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
