Gebruiksaanwijzing /service van het product LC 20B1U van de fabrikant Sharp
Ga naar pagina of 59
LIQUID CR YST AL TELEVISION LC-20B1U ENGLISH LC-20B1U FRANÇAIS TÉLÉVISEUR À CRIST A UX LIQUIDES TELEVISOR DE CRIST AL LÍQUIDO TELEVISOR DE CRIST AL LÍQUIDO MANU AL DE MANEJO PORTUGUÊS ESPAÑOL MANU AL DE OPERAÇÃO OPERATION MANUAL MODE D’EMPLOI 20B1UCover 02.
LC-20B1U LIQUID CR YST AL TELEVISION OPERA TION MANU AL ENGLISH ENGLISH IMPOR T ANT INFORMA TION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
2 IMPOR T ANT INFORMA TION WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
3 DEAR SHARP CUST OMER Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precau- tions carefully before using this product.
4 ■ The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.
5 IMPOR T ANT SAFETY PRECA UTIONS (Continued) ■ If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
6 CONTENTS Page DEAR SHARP CUSTOMER ............................................................................................................ .3 IMPORTANT SAFETY PRECAUTIONS ..........................................................................
7 Make sure the following accessories are provided with the product. SUPPLIED A CCESSORIES Remote Control AC Cord Antenna Cable “ AAA ” size (UM/SUM-4) Dry Battery ( × 2) AC Adapter UBATU0026GEZZ.
8 PREP ARA TION Batteries for the Remote Control If the remote control fails to operate the LCD color TV functions, replace the batteries in the remote control. 1 Open the battery cover. 2 Insert batteries (two “ AAA ” (UM/SUM-4) size batteries, supplied with product).
9 Power Connection Plug into AC outlet. Household power outlet AC cord AC adapter ● Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet. ● Always turn the main POWER switch of the LCD TV set to off when connecting the AC adapter.
10 PREP ARA TION (Continued) A. Combination VHF/UHF Antenna OUTDOOR ANTENNA CONNECTION • Use one of the f ollowing two diagrams if y ou connect an outdoor antenna. A: Using a VHF/UHF combination outdoor antenna. B: Using separate VHF and/or UHF outdoor antennas.
11 ● TV/VIDEO , CH ( )/( ) , VOL (–)/(+) , and MENU on the main unit have the same functions as the same buttons on the remote control. Fundamentally, this operation manual provides a description based on operation with the remote control.
12 VIDEO AUDIO L Y P B P R R AUDIO L R COMPONENT AV-IN2/OUT ANT. VIDEO S-VIDEO AUDIO L R HEAD PHONE POWER INPUT DC13V AV-IN1 PC Card PC Card V O L C HM E N U T V /V ID E O M A IN P O W E R Main unit (.
13 Listening with Headphones FR ONT AND REAR CONTR OL OPTIONS (Contin ued) ■ Before connecting a connection cord into the rear terminal, remove the back cover.
14 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP CARD ENTER CH VOL FLASHBACK MUTE BRIGHT MENU TV/VIDEO REMOTE CONTROL B ASIC OPERA TION This product is factory set to comply with the TV broadcasting system in the United States.
15 AV 2 C O MP O N E N T CA R D AV 1 12 B ASIC OPERA TION (Continued) 1 Press MAIN POWER , located on the upper side of the main unit, to on. 2 The POWER indicator instantane- ously changes from red to green and the main unit is turned on.
16 Sound Volume ON/OFF Standby 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP CARD ENTER CH VOL FLASHBACK MUTE BRIGHT MENU TV/VIDEO To mute the sound 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP CARD ENTER CH VOL FLASHBACK MUTE BRIGHT MENU TV/VIDEO B ASIC OPERA TION (Continued) 1 Press VOL (+) to increase the sound volume.
17 1 Press the button. 2 Press the 5 button. B ASIC OPERA TION (Continued) Changing the Channels Changing channels by using Channel Select on the remote control To select a 1- or 2-digit channel number (e.g., Channel 5): Complete the following procedure within 4 seconds.
18 SELECTING MENU ITEMS • This LCD TV set allows y ou to adjust the v ar ious settings using the menu screen. Select the desired menu item b y follo wing the steps below and then ref er to the indicated page for details . 1 Press MENU to display the MENU screen.
19 Directly setting the SLEEP TIMER 1 Press SLEEP to display the SLEEP TIMER screen. 2 Press SLEEP to set the sleep timer (in minutes). The time can be set in increments of 30 minutes and in the range between 30 and 120 minutes. The SLEEP TIMER is turned off when --- is displayed.
20 ADJUSTMENT (Continued) Adjusting the BRIGHTNESS Settings You can set the brightness of the screen. Directly setting the BRIGHTNESS 1 Press BRIGHT to display the BRIGHTNESS screen.
21 Adjusting the LANGUAGE Settings The language for the On-Screen Display can be ENGLISH, SPANISH or FRENCH. 1 Press MENU to display the MENU screen. 2 Press ] / [ to move the cursor to SET UP, and press ENTER . 3 Press ] / [ to move the cursor to LANGUAGE, and press ENTER .
22 ADJUSTMENT (Continued) Adjusting the VIDEO ADJUST Settings 1 Press MENU to display the MENU screen. 2 Press ] / [ to move the cursor to VIDEO ADJUST, and press ENTER . 3 Press ] / [ to move the cursor to the desired item, and press ENTER . 4 Press < / > to change the setting.
23 Selected item Press < . Press > . PICTURE Decrease contrast Increase contrast TINT Toward purple Toward green COLOR Lower color intensity Higher color intensity BLACK LEVEL Less bright More b.
24 1 Press MENU to display the MENU screen. 2 Press ] / [ to move the cursor to PRESET, and press ENTER . ADJUSTMENT (Continued) Adjusting the PRESET Settings Selected item Factory setting Setting change BRIGHTNESS [B RI GHT] Maximum brightness [NORMAL] Brightness 60% → Suitable for viewing in a well-lit area.
25 ADJUSTMENT (Continued) SET UP ■ CHANNEL SETTING It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV programs. 1 Press MENU to display the MENU screen. 2 Press ] / [ to move the cursor to SET UP, and press ENTER .
26 SET UP (Continued) ■ Saving broadcast TV channels in the memory 1 Press MENU to display the MENU screen, press ] / [ to move the cursor to SET UP, and press ENTER . 2 Press ] / [ to move the cursor to CH-SETTING, and press ENTER . 3 Press ] / [ to move the cursor to CH SEARCH, and press ENTER .
27 ADJUSTMENT (Continued) ■ BLUE SCREEN Automatically turns the screen blue if a broadcast signal is not received. 1 Press MENU to display the MENU screen. 2 Press ] / [ to move the cursor to SET UP, and press ENTER . Adjusting the BLUE SCREEN Settings 3 Press ] / [ to move the cursor to BLUE SCREEN, and press ENTER .
28 Adjusting the CLOSED CAPTION Settings 1 Press MENU to display the MENU screen. 2 Press ] / [ to move the cursor to CLOSED CAPTION, and press ENTER . CAPTION TEXT OFF CH 1 CH 2 MODE: DATA: ● If a broadcast has CLOSED CAPTION and MUTE is pressed, the set enters [CAPTION] mode automatically .
29 Adjusting the V-CHIP Settings ■ V-CHIP • This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching violent or sexual scenes that may be harmful.
30 [2] TV P ARENT AL GUIDELINES RA TING ⇑ age base ⇓ Adjusting the V-CHIP Settings (Continued) ⇐ content base ⇒ FV V S L D (F antasy (Violence) (Sexual (Adult (Sexually Violence) Situation) La.
31 [ 1] MPAA RATING ■ SETTING V-CHIP Adjusting the V-CHIP Settings (Continued) 2 Press ] / [ to move the cursor to V-CHIP BLOCK, and press ENTER . 3 INPUT SECRET NO. will be displayed. Input the 4-digit secret number by using the channel select keys.
32 [2] TV GUIDELINES P arent Control (V -CHIP Operation Continued) Adjusting the V-CHIP Settings (Continued) 1 Repeat steps 1 to 3 of [1] MPAA RATING . 2 Press ] / [ to move the cursor to TV GUIDELINES, and press ENTER . 3 Press ] / [ to move the cursor to TV-Y7, and press ENTER .
33 P arent Control (V -CHIP Operation Continued) Adjusting the V-CHIP Settings (Continued) ADJUSTMENT (Continued) 3 Press ] / [ to move the cursor to BLOCK CONTENT, and press ENTER . 4 Press ] / [ to move the cursor to the desired item, and press ENTER .
34 [3] A CTIV A TE ON T O TURN ON V -CHIP BLOCK Adjusting the V-CHIP Settings (Continued) 1 Press MENU to display the MENU screen. 2 Press ] / [ to move the cursor to V-CHIP BLOCK, and press ENTER . 3 INPUT SECRET NO. will be displayed. Input the 4-digit secret number by using the channel select keys.
35 [5] CHANGING THE V-CHIP BLOCK SETTINGS Adjusting the V-CHIP Settings (Continued) 1 Repeat steps 1 to 3 of [1] MPAA RATING , then INPUT SECRET NO. will be displayed. 2 Input the 4-digit secret number by using the channel select keys; the V-CHIP select mode will be displayed.
36 MEMOR Y CARD PLA YB A CK Memory Car ds ■ Images that have been recorded on the memory card using a digital camera or other device and that conform to the DCF standard* can be played back in CARD mode. * DCF (Design rule for Camera File system) is a standard of the Japan Electronics and Information Technology Industries Association (JEITA).
37 MEMOR Y CARD PLA YB A CK (Continued) Car d Precautions ■ Precautions on Handling Follow the precautions given below when handling the memory cards and PC card adapter as failure to do so may result in damage to data or malfunction. ● Playback of images stored on memory cards other than those listed in the table on page 36 is not guaranteed.
38 1 Insert the memory card (commercially available) on which images have been recorded into the PC card adapter (commercially available). 2 Press POWER to turn off the LCD TV. CAUTION: Always turn off the LCD TV before plugging in or unplugging the PC card adapter or memory card.
39 1 Press POWER to turn on the LCD TV. 2 Press CARD to change to CARD mode. ACCESSING DATA is displayed on the screen. After data from the card is loaded, CARD is displayed on the screen. ● After purchasing the LCD TV, CARD playback mode is set as the factory settings.
40 1 Press CARD to change to CARD playback mode. 2 Press < / > to select the desired image to display. > cycles images in forward sequence, while < cycles images in reverse sequence. ACCESSING DATA is displayed until the next image is displayed.
41 1 Press CARD to switch to INDEX MODE. Nine images are displayed on the screen at a time. 2 Select an image using ] / [ / < / > , and press ENTER .
42 1 Turn on CARD mode. (see page 39) 2 Press MENU to display the MENU screen. 3 Press ] / [ to move the cursor to CARD SETTING, and press ENTER . 4 Press ] / [ to select the desired setting item, and press ENTER .
43 CARD ADJUSTMENT (Continued) Adjusting the SLIDE SHOW Settings You can set the desired display time and playback order. REPEAT setting is also available. 1 Press CARD to change to CARD mode. 2 Press CARD to switch to SLIDE SHOW as the playback mode.
44 CARD ADJUSTMENT (Continued) Adjusting the MY PROGRAM Settings You can select and register any of up to nine images from a large number of images. Images registered for MY PROGRAM are displayed in the specified sequence in SLIDE SHOW playback mode. 1 Press CARD to change to CARD mode.
45 CARD ADJUSTMENT (Continued) ■ Erasing the MY PROGRAM Settings 1 Press MENU to display the MENU screen, press ] / [ to move the cursor to CARD SETTING, and press ENTER to display the CARD SETTING screen. 2 Press ] / [ to move the cursor to MY PROGRAM, and press ENTER .
46 CARD ADJUSTMENT (Continued) Adjusting the ROTATE Settings • You can rotate a recorded image. • You can move to the next or previous image by selecting CHOOSE FILE even if you have not exited the ROTATE screen. When the image that you want to rotate is displayed in CARD or SLIDE SHOW playback mode, follow the steps below to rotate the image.
47 CARD ADJUSTMENT (Continued) Adjusting the SOUND Settings You can listen to the audio from TV or external devices such as VCR or DVD player, etc. through the TV set while card playback.
48 CONNECTING WITH EXTERNAL DEVICES You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of the TV set. When connecting an external device, turn off the power of the main unit first to prevent any possible damage.
49 CONNECTING WITH EXTERNAL DEVICES (Continued) Connecting a VCR, DVD player or a video camera (AV-IN1/2/COMPONENT) ● If your VCR (or other external devices) has an S-Video terminal, S-VIDEO connection is recommended.
50 CONNECTING WITH EXTERNAL DEVICES (Continued) Outputting video and audio (video output) You can output video and audio data from the TV set through the AV output terminals (AV-OUT).
51 TROUBLESHOOTING ■ Before calling for repair service, check the following items for possible remedies to the encountered symptoms. TV set Problem Check item Reference Pages There is no picture. There is no picture from AV-IN 1. 9 15 15 Sound Picture • Make sure the AC adapter is properly inserted in the power outlet.
52 Antenna Problem Check item • The reception may be weak. • The state of the broadcast may also be bad. • Make sure the antenna is facing the right direction. • Make sure the outside antenna is not disconnected. The picture is not sharp. TR OUBLESHOO TING (Continued) The picture moves.
53 TR OUBLESHOO TING (Continued) Card Problem Check item Reference Pages 39 • Check if data is recorded on the memory card. • Check if CARD mode is turned on as the input selection. • Images which have been processed by a PC sometimes cannot be played back by this equipment.
54 SPECIFICA TIONS Items LC-20B1U Model LCD panel 19.7 ” Advanced Super View & BLACK TFT LCD Number of dots 921,600 dots VGA Video color systems N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60 Destination USA/Latin A/Twn TV Standard (CCIR) NTSC/PAL-M/PAL-N TV function TV Tuning System PLL 181 ch.
55 DIMENSIONAL DRA WINGS Unit: inch/mm POWER INPUT DC12V ANT. HEAD PHONE S-VIDEO R AUDIO VIDEO AV-IN1 L AV-IN 2/OUT COMPONENT R AUDIO VIDEO L R AUDIO L P R P B Y CH VOL TV/VIDEO MENU MAIN POWER 24.8/630 15.8/401.3 6.5/163.9 1.2/30.5 2.6/65.5 9.0/229.4 18.
56 SHARP ELECTRONICS CORPORA TION Shar p Plaza, Mahwah, Ne w Jersey 07430-2135 SHARP CORPORA TION LIMITED W ARRANTY END-USER LIMITED W ARRANTY SHARP ELECTRONICS CORPORA TION warrants to the first end .
LIMITED W ARRANTY Consumer Electronics Products Congratulations on y our pur chase! Sharp Electronics of Canada Ltd. (hereinafter called “ Sharp ” ) gives the following express warranty to the fir.
LC-20B1U-GBpp48-58 02.2.21, 4:39 PM 58.
Een belangrijk punt na aankoop van elk apparaat Sharp LC 20B1U (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sharp LC 20B1U heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sharp LC 20B1U vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sharp LC 20B1U leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sharp LC 20B1U krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sharp LC 20B1U bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sharp LC 20B1U kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sharp LC 20B1U . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
