Gebruiksaanwijzing /service van het product LC-19A33X-BK van de fabrikant Sharp
Ga naar pagina of 54
MODEL LC-19A33X-BK LC-19A33X-WH LCD COLOUR TELEVISION OPERA TION MANUAL Cover_19A33X.indd 1 Cover_19A33X.indd 1 2007/07/11 15:56:34 2007/07/11 15:56:34.
Cover2_19A33X.indd 1 Cover2_19A33X.indd 1 2007/07/11 16:51:17 2007/07/11 16:51:17.
1 Dear SHARP customer Contents Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product.
2 Contents Watching TV (Continued) Energy conservation settings ................................................................................... 25 Auto power-off at a designated time ............................................................. 25 Auto power-off after the end of broadcast .
3 Important Safety Precautions • Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product.
Supplied accessories 4 Make sure the following accessories are provided with the product. Remote control unit “AA” size battery ( g 2) AC cord Cable clamp Operation manual Stand unit Page 8 Page 12 Page 9 Page 9 Page 5 Stand Screws ( g 3) Hex key Used with batteries inserted.
5 Preparation 1 2 1 Insert the stand into the openings on the bottom of the TV. 2 Insert and tighten the 3 screws into the 3 holes on the rear of the stand. Hex key Screw Soft cushion NOTE • To detach the stand, perform the steps in reverse order. Confi rm the 3 screws supplied with the TV.
6 Preparation Part names Volume up ( e )/down ( f ) buttons Channel up ( r )/down ( s ) buttons OPC indicator* POWER (On/Off) button TV/VIDEO button *OPC: Optical Picture Control (See page 30) ** See page 13 for the TV status indicator.
7 Preparation TV (Rear) RS-232C terminal INPUT 3 (HDMI) terminals INPUT 4 (PC INPUT) terminals INPUT 2 terminals INPUT 1 terminals Antenna input terminal AC INPUT terminal Regarding the headphone jack • Use headphones with a stereo mini plug (Ø 3.5 mm).
8 Preparation Remote control unit 1 POWER (STANDBY/ON) To switch the power on and off. (See page 13.) 2 DISPLAY Display the channel or input information. 3 0 – 9 Set the channel. (See page 17.) TELETEXT mode: Set the page. (See pages 43 and 44.) 4 A (Flashback) Press to return to the previous selected channel or external input mode.
Preparation 9 1 Before turning on the power Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. • Do not turn on the power of the TV before connecting the AC cord.
10 Preparation CAUTION • To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box), PC or other external equipment. • Refer to the relevant operation manual (VCR, DVD player, etc.
11 Preparation Connecting a Digital TV STB (Set Top Box) You can use the INPUT 1 (component) or INPUT 3 (HDMI) terminal when connecting to a Digital TV STB (Set Top Box) and other audiovisual equipment. NOTE • When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 3.
30º 30º 30º 30º 12 Preparation CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. • Do not mix batteries of different types. Different types of batteries have different characteristics.
13 Turning on the power Press POWER on the TV. • POWER indicator (Green): The TV is on. (After a few seconds, an image appears with sound.) • After turning the power “ON” by pressing POWER on the TV, you can turn the power ON/OFF by pressing POWER on the remote control.
ENTER : Select : Enter MENU : End RETURN : Back w Using the control panel of the TV You can also operate the Menu using the control panel of the TV. Button operations on the control panel correspond to the ones on the remote control as shown below. NOTE • Menu options differ in the selected input modes, but the operating procedures are the same.
Picture Picture 15 Preparation TV/AV input mode menu items List of TV/AV menu items to help you with operations PC input mode menu items List of PC menu items to help you with operations AV Mode ........................................................
16 Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press a / b to select “Auto Installation”, and then press ENTER . 1 2 3 MENU [ Setup .
17 You can change channels in several ways. Using CH r / s on the remote control unit • Press CH r to increase the channel number. • Press CH s to decrease the channel number. NOTE • CH r / s on the TV operates the same as CH r / s on the remote control unit.
18 Setting channels to your preference You can run the auto search procedure again at any time by accessing the Setup menu and Programme Setup. Channels can be tuned automatically or manually. Auto search You can also automatically search by performing the procedure below.
19 Watching TV Search tuning Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information displays. Press a / b to select “Search”, and then press ENTER . 1 2 MENU [ Setup ... Programme Setup ] Fine Colour System Sound System Skip Search 179.
20 Press MENU and the MENU screen displays. 1 Press c / d to select “Setup”. Press a / b to select “Programme Setup”, and then press ENTER . If you already set the password, enter it here. • See page 24 for setting a password. 2 3 Press a / b to select “Sort”, and then press ENTER .
21 Watching TV Press MENU and the MENU screen displays. 1 Press c / d to select “Setup”. Press a / b to select “Programme Setup”, and then press ENTER . If you already set the password, enter it here. • See page 24 for setting a password. 2 3 Press a / b to select “Erase Programme”, and then press ENTER .
22 Useful viewing functions Watching TV Freezing the image Allows you to capture and freeze one frame from a moving image that you are watching. 1 2 Press FREEZE . • Captures one frame from a moving image. Press RETURN to cancel the function. NOTE • The still image automatically goes out after 30 minutes.
23 Switching the analogue audio format You can switch between multiple audio modes when watching a multiple audio or stereo broadcast programme. When receiving a monaural signal Each time you press MPX , the mode switches between NICAM MONO and MONO. Watching TV NOTE • “BBC2” and “99” are tentative network name and channel.
24 Password setting for the child lock (For TV input mode) Allows you to use a password to protect certain settings from being accidentally changed. Setting a password Register a 4-digit password number to use the Child Lock function. Press MENU and the MENU screen displays.
25 Watching TV Auto power-off at a designated time This function is conveniently used when, for instance, going to bed while watching TV. 1 2 Sleep timer: Remain 2 hr . 00 min. NOTE • When the time has been set, countdown automatically starts. • Five minutes before the preset of time expires, the remaining time displays each minute.
26 Press MENU and the MENU screen displays. 1 Press c / d to select “Power Control”, and then press ENTER . • Power control menu displays. 2 Press a / b to select “Power Management”, and then press ENTER . 3 Press a / b to select “Mode1” or “Mode2”, and then press ENTER .
27 Watching TV Selecting the Wide Screen Signalling (WSS) picture size automatically WSS allows a television to switch automatically among the different screen formats. Press MENU and the MENU screen displays. 1 Press c / d to select “Setup”. 2 Press a / b to select “WSS”, and then press ENTER .
28 Selected item Normal Zoom 14:9 Panorama Full Cinema 16:9 Cinema 14:9 Description For 4:3 “standard” pictures. A side bar appears on each side. For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes.
Press AV MODE . • Present AV MODE displays. Press AV MODE again before the mode displayed on the screen disappears. • The mode changes as shown below.
Press MENU and the MENU screen displays. 1 Press c / d to select “Picture”. 2 Press a / b to select the desired menu item. Press ENTER to proceed if necessary. 3 Press a / b or c / d to select the desired item or adjust the item to the desired level.
Press MENU and the MENU screen displays. 1 Press c / d to select “Picture”. 2 Press a / b to select “Advanced”, and then press ENTER . 3 w Colour Temp. (Colour Temperature) Adjusts the colour temperature to give the best white image. w C.M.S. (Colour Management System) Colour tone is managed using the six-colour adjustment setting.
32 Watching TV Other picture settings DNR (Digital Noise Reduction) Reduces noise on the screen and provides a clearer video image. Press MENU and the MENU screen displays. 1 Press c / d to select “Option”. 2 Press a / b to select “DNR”, and then press ENTER .
33 Audio adjustment You can adjust the audio of the selected AV mode. w Sound Wide This feature can increase the spread of the sound. Press c / d to select “Audio”.
34 To watch an HDMI equipment image, select “INPUT3” using TV/VIDEO on the remote control unit or on the TV. 1 Press MENU and the MENU screen displays. 2 Press c / d to select “Setup”. 3 Press a / b to select “HDMI Audio Select” or “HDMI Auto View”, and then press ENTER .
35 Settings when using external devices Press TV/VIDEO on the remote control unit or on the TV to select the input source. • The image and sound from the selected source are output on the TV. • You can also select the input source by pressing a / b .
36 Settings when using external devices Press MENU and the MENU screen displays. 1 Press c / d to select “Option”. 2 Press a / b to select “Colour System”, and then press ENTER . 3 Press a / b to select a compatible video signal system of your equipment, and then press ENTER .
37 Connecting a PC Displaying a PC image on the screen ANALOG RGB AUDIO (L/R) To view an image from a PC, select “INPUT4” using PC or TV/VIDEO on the remote control unit or TV/ VIDEO on the TV. PC RGB cable (commercially available) Ø 3.5 mm stereo minijack cable (commercially available) Use the PC terminals to connect a PC.
38 Selecting the picture size Press WIDE . • The WIDE MODE menu displays. 1 Press WIDE or a / b to select a desired item on the menu. 2 (Example) You can select the picture size as illustrated below. NOTE • Connect the PC before making adjustments.
39 Press MENU and the MENU screen displays. 1 Press c / d to select “Setup”. 2 Press a / b to select “Fine Sync.”, and then press ENTER . 4 Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimise the image.
40 Connecting a PC Selecting the input resolution • Some input signals may have to be registered manually to display properly. • The input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually.
41 • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing.
42 P I I I D C C A A A A A A A A POWER OFF (ST ANDBY) INPUT SWITCHING (TOGGLE) TV (CHANNEL FIXED) INPUT1—4 (1—4) TV DIRECT CHANNEL (1—99) CHANNEL UP CHANNEL DOWN TOGGLE ST ANDARD MOVIE GAME USER.
43 1 2 3 Turning on and off Teletext Teletext function TELETEXT Red Green Yellow Blue What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
44 Teletext function 1 2 + 0002 00 01 02 03 3 4 Subpage screen Press m to display Teletext. Press 1 to display the subpage as shown below. Select the desired subpage by using c / d . • 0 — 9 directly selects the desired subpage. Press 1 to exit the subpage screen.
45 1 2 3 4 MENU [ Setup ... T ext Language ] Arabic/Hebrew W est Europe East Europe T urkish/Greek Teletext function Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press a / b to select “Text Language”, and then press ENTER .
Troubleshooting 46 The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced. Possible Solution Appendix Problem • No power. • Unit cannot be operated. • Remote control unit does not operate.
47 Appendix If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. Press a / b to select “Reset”, and then press ENTER . 3 Press MENU and the MENU screen displays. 1 Press c / d to select “Setup”.
Specifi cations 48 Appendix LCD panel Item LC-19A33X 18.5 o (470 mm) LCD Model Viewing angles H : 160º V : 160º Audio amplifi er 2W g 2 Speakers 30 g 75 mm 2pcs Video Colour System TV Function TV-Standard Receiving Channel VHF/UHF CATV TV-Tuning System Brightness Backlight life Terminals Rear Antenna input INPUT 1 PAL/SECAM/NTSC 3.
100 100 75 69 462 411.8 232.4 360 320 218 40 196 240 17.5 Dimensional drawings 49 Unit: mm Appendix 19A33X_en_h.indd 49 19A33X_en_h.indd 49 2007/07/23 18:25:37 2007/07/23 18:25:37.
Appendix 50 If you forget the password, clear the password using the following procedure. The Password is . NOTE • As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place. CLEARING THE PASSWORD 4 The password input screen displays.
Memo 19A33X_en_h.indd 51 19A33X_en_h.indd 51 2007/07/23 18:25:39 2007/07/23 18:25:39.
Memo 19A33X_en_h.indd 52 19A33X_en_h.indd 52 2007/07/23 18:25:39 2007/07/23 18:25:39.
Een belangrijk punt na aankoop van elk apparaat Sharp LC-19A33X-BK (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sharp LC-19A33X-BK heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sharp LC-19A33X-BK vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sharp LC-19A33X-BK leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sharp LC-19A33X-BK krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sharp LC-19A33X-BK bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sharp LC-19A33X-BK kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sharp LC-19A33X-BK . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
