Gebruiksaanwijzing /service van het product MD-M2H van de fabrikant Sharp
Ga naar pagina of 52
MD MICRO SYSTEM OPERA TION MANU AL MODEL MD-M2H Pa g e SPECIAL NO TES .............................................. 1 A CCESSORIES ................................................. 2 PRECA UTIONS ................................................. 2 NAMES OF CONTR OLS AND INDICA TORS .
1 NO TE FOR USERS IN THE U .K. The mains lead of this product is fitted with a non- rewireab le (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or AST A approv ed BS 1362 fuse marked or and of the same rating as abo ve, which is also indicated on the pin f ace of the plug must be used.
2 AM loop aerial × 1 ■ General ● Please ensure that the equipment is positioned in a well v entilated area and ensure that there is at least 10cm (4") of free space along the sides and back. There must also be a minimum of 20cm (8") of free space on the top of the unit.
3 ■ Fr ont panel 1. On/stand-by Button 2. (MD) Display Button 3. Timer Stand-b y Indicator 4. MD Compartment 5. (MD) Record Button 6. (CD/MD/TUNER) Memory Button 7. (CD/MD) Stop Button (TUNER) T uning Down Button 8. (CD/MD) Play/P ause Button (TUNER) T uning Up Button 9.
4 ■ Displa y window 1. Level Meters 2. Character Information Displa y 3. Surround Indicator 4. Extra Bass Indicator 5. FM Stereo Indicator 6. FM Stereo Mode Indicator 7. (CD/MD) Disc Indicator 8. (CD/MD) T rack Indicator 9. (CD/MD/TUNER) Memory Indicator 10.
5 ■ Remote contr ol 1. Remote Control T ransmitter LED 2. (RDS) Programme T ype/T raffic Informa- tion Search Button 3. (RDS) Station Selector Button 4. Clock Button 5. Surround Button 6. Timer Button 7. Name/T OC Edit Button 8. Sleep Button 9. (TUNER) Preset Up/Down Buttons 10.
6 PREP ARA TION FOR USE ■ Aerial connection ■ Speaker connection Connect each speaker wire to the SPEAKER ter- minals as shown. Use speakers with an impedance of 4 ohms or more, as low er impedance speakers can damage the unit. Caution: ● Before connecting the speak ers to the unit, con- nect the speaker wires to the speak ers first.
7 (Continued) ■ Removing the speaker grilles ■ Connecting the A C power lead Connect the AC po wer lead to the A C INPUT sock et, then connect the AC po wer lead plug to an A C sock et. Notes: ● Unplug the AC po wer lead from the A C soc k et if the unit will not be in use for a prolonged period of time.
8 15 ● 2 "AA" size batt eries (UM/SUM-3, R6, HP-7 or similar) 15 Remote sensor 0.2 m - 6 m (8" - 20') (Continued) ■ Remote control ■ T o change the brightness of the display When bright When dark Ï ● When inser ting or removing the batteries, push them toward the battery ter minal.
9 SETTING THE CLOCK 4,6,8 2 1 3,5,7 , 9 1 Press the ON/ST AND-BY button to turn the power on. 2 Press the CLOCK button. DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN REC kHz MHz SLEEP 3 Within 5 seconds, press the ENTER button. DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN REC kHz MHz SLEEP 4 Press the or button to select the time displa y mode.
10 SOUND CONTR OL ■ V olume (Main unit operation) When the VOLUME control is turned clockwise, the v olume will increase. When it is turned anticlock- wise, the v olume will decrease. (Remote control operation) Press the VOLUME button to increase the v olume and the V OLUME button to decrease the v olume.
11 COMP A CT DISC OPERA TION ■ CD pla yback DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN REC kHz MHz SLEEP Total number of tracks Total playing time TOTAL Flash 1 Press the ON/ST AND-BY button to turn the pow er on. 2 Press the CD button. 3 Press the 7 CD EJECT b utton to open the CD compar tment.
12 MINIDISC OPERA TION 1 Press the ON/ST AND-BY button to turn the power on. 2 Press the MD button. 3 Load a MiniDisc in the direction indicated by the arrow on the MiniDisc, with the labeled side f ac- ing up. ● The total number of trac ks and the total pla ying time on the MiniDisc will be display ed.
13 06 2 4 5 3 5 3 2 4 06 CONVENIENT CD AND MD OPERA TION ■ APSS (A uto Program Sear ch System) APSS automatically locates the beginning of any track. ■ Repeat and random play 1 Select the desired programme source , CD or MD . 2 Press the P-MODE button.
14 ■ APMS (Automatic Pr ogrammable Music Selector) 1 Select the desired programme source , CD or MD , by pressing the CD or MD button. 2 Press the MEMOR Y button. MEMORY MEMORY REC 3 Press the 5 3 or 2 4 button. TRACK MEMORY REC Selected track number TRACK 4 Press the ENTER button.
15 DISPLAY DISPLAY ■ Switching the time displa y Each time the TIME b utton is pressed during play- back or when in the pause mode , the display will change. TIME (Remote control operation) The elapsed playing time f or current track will be display ed.
16 RADIO OPERA TION 2,3,5 1 1 2,3,5 4 ■ T uning 1 Press the ON/ST AND-BY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) b utton to select the desired frequency band. (FM ST , FM or AM) 4 Press the TUNING ( X or W ) button to tune into the desired station.
17 (Continued) 2,4 2,4 3 3 ■ Preset tuning Y ou can store up to 40 stations in memory (40 sta- tions consisting of any combination of AM and FM stations you lik e) and recall them. T o enter stations into memory: 1 P erf orm steps 1 - 5 in the "T uning" section.
18 Descriptions of the PTY (Programme T ype) codes, TP (T raffic Programme) and T A (T raffic Announcement) With this unit, you can search f or and receiv e the follo wing PTY , TP and T A signals. NEWS: Shor t accounts of f acts, e vents and publicly e xpressed views, repor tage and actuality .
19 (Continued) SCIENCE: Programmes about the natural sci- ences and technology . V ARIED: Used for mainly speech-based pro- grammes usually of light-entertain- ment nature, not cov ered by other categories. Examples include: quiz- zes. panel games, personality inter- views.
20 (Continued) ■ ASPM (Auto Station Pr ogram Memory) It is recommended that you store stations in memor y using ASPM. (This memor y can be used f or PTY searches , sta- tion select and EON switching.
21 (Continued) 2,3 1 1 2,3 4,6 4,6 5 5 5 Within 6 seconds, press the PRESET ( X or W ) button to select a desired station name y ou want. ● Each time the button is pressed, the station name will appear . If the button is held down f or more than 0.5 seconds, the station name will continu- ously change.
22 T o try to store a station name again, if the wrong name was stored in memory by mistake: When you store station names in memory using the ASPM function, the correct station names ma y not actually be stored if there is lots of noise or if the RDS station signal is too weak.
23 (Continued) 6 Whilst the selected programme type is flashing (within 4 seconds), press the PTY .TI SEARCH (PTY .TI) button again. DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN REC kHz MHz SLEEP DISC TO.
24 PRESET ( X W ) PRESET ( X W ) (Continued) ■ T o manually recall the stations stored in memory ■ T o switch the display Each time the DISPLA Y MODE button is pressed whilst an FM station is tune.
25 2 4 3 (Continued) 5 When a programme of the type specified starts on an ON (other network) station, the unit will automatically s witch to the station broadcasting the selected programme type , and "PTY" will flash.
26 (Continued) 2 4 3 ■ EON-TI (Main unit operation) 1 T une in the desired RDS station (when a sta- tion name is being display ed). 2 Press the EON button when "EON" appears . ● "PTY TI" and "SELECT" will appear alternately for about 6 seconds .
27 (Continued) In the f ollowing cases, the EON stand-b y mode will be cancelled. ● Press the ON/ST AND-BY button to enter the stand-by mode . ● When the unit is switched to another band in the EO.
28 ■ Differences fr om tape recor dings Y ou cannot recor d music on the re- verse side of a MiniDisc. MiniDiscs are single sided and should only be inser ted with the correct side up. Y ou don’t need to sear ch for the start- ing point at which to record.
29 ■ Recor ding from a CD onto a MiniDisc (One-T ouch Editing) A CD can be recorded to a MiniDisc, starting from the first trac k, with a one-touch operation. ● After recording (all of the trac ks that can be recorded), the unit will stop automatically .
30 ■ APMS recording CD 0 MD EDIT H 1 1 2 3 2 3 H H 4 4 1 Select tracks f or APMS playback. (P age 14) 2 Load a recordable MiniDisc. 3 Press the CD 0 MD EDIT button. ● APMS playbac k will star t, and recording will star t automatically . ● Programmed trac ks will be recorded in order .
31 3 2 3 4 4 H H 5 5 ■ Recording fr om the b uilt-in radio onto a MiniDisc 1 T une in to the desired station. (pages 16 - 17.) 2 Load a recordable MiniDisc. 3 Press the ● REC button. ● The unit will enter the recording stand-by mode. 4 Check the recordab le time by pressing the DIS- PLA Y button.
32 DIVIDE A single trac k can be divided into two at an y desired position. ● The numbers of the tracks which come after the newly divided tr ack will be automatically increased by one. (Page 36) 12 3 12 34 AB C D AB C D MO VE A designated track can be mo ved to any desired position.
33 ■ T o create a disc name A name f or the whole disc. Disc names are displa yed when an MD is inserted. NAME/ TOC EDIT CLEAR ENTER DISPLAY / (Remote control operation) 6 Press the ENTER button to enter the character . REC SLEEP ● Repeat steps 4 to 6 abov e to enter the charac- ters in the name.
34 1 During playback or in the pause mode , press the NAME/T OC EDIT button. REC SLEEP 2 Within 10 seconds, press the ENTER button. TRACK REC SLEEP TRACK ● The unit will enter the character input mode. ● The trac k you are listening to will be play ed repeatedly .
35 ■ T o change disc names and track names T o add a character: Example: T o change “BET” to “BEST” 1 T o change disc names, perf orm steps 1 - 3 on page 33. T o change track names , perf or m steps 1 - 2 on page 34. 2 Press the or button to make the char acter at the place you w ant to add a letter begin flash- ing.
36 ■ Divide ■ Combine 1 Pla y the track which you w ant to divide into two , and press the 0 6 button at the point where you w ant to divide the track. ST 2 Press the NAME/T OC EDIT b utton, and within 10 seconds, select “DIVIDE” pressing the or button.
37 ■ Mo ve 4 Select the new tr ack position pressing the or button. ● T o cancel the operation, press the ■ button. 5 Press the ENTER button again. ● The trac k is mov ed, and the unit is stopped at the beginning of the new trac k selected in step 4.
38 ■ Erase T o erase all of the tracks at once: 1 Press the ■ button. ● The total number of trac ks and the total pla ying time on an MD will appear . 2 Press the NAME/T OC EDIT button, and within 10 seconds, select “ALL ERASE” pressing the or button.
39 TIMER OPERA TION ■ Timer playbac k Before timer pla yback, the follo wing preparations are required. I Load a CD , MD . I Preset the radio station. 1 Press the ON/ST AND-BY button to turn the power on. 2 Press the MD , CD , TUNER(BAND), A UX button to select desired function.
40 ■ Timer recording Bef ore timer recording, the follo wing preparations are required. ● Load a CD , a recordable MD . ● Preset the radio station. ● Before setting the timer , make sure that the clock setting is correct. (P age 9) 1 Press the ON/ST AND-BY button to turn the power on.
41 Sleep timer setting Timer playback (record) setting Timer playback (record) start 1 minute - 2 hours Desired time Sleep operation will automatically stop. End time Caution: In the follo wing cases, the timer recording function will not work. ● When a MiniDisc has not been inser ted.
42 ■ Connecting external units Before connecting e xter nal units, set this unit to the stand-by mode and turn off the power to the e xternal units. Connecting to stereos or MD/CD player s (equipment which can output analogue signals) The other MD/CD player Commercially available lead wi th 3.
43 ■ Listening to sound from an e xter- nal unit T o listen to sound from an external unit connected to the analogue input terminals: ■ Manual recor ding Y ou can start a recording manually whilst listening to playbac k from other e xternal equipment (T ape deck, T uner) connected to the auxiliar y input.
44 The disc is stored in a car tridge. Y ou can handle it easily without worrying about dust, finger prints, etc. Howe ver , dust entering the opening of the car tr idge, dir t on the car tridge, warping, etc. ma y cause malfunctions. Please note the follo wing.
45 Even if the maxim um recording time of a MiniDisc has not been reached, “TOC FULL ” may be displa yed. Even if the maxim um recording time of a MiniDisc has not been reached, “DISC FULL ” ma y be display ed. Even if se veral short tracks are erased, the remaining recording time ma y not show an increase.
46 (Continued) Symptom ● A recording cannot be made. ● Even though a disc has been loaded, “MD NO DISC” or “READ ERR” is displa y ed. ● Playbac k sounds are skipped.
47 When an error message is display ed, proceed as follo ws: Error messa ges BLANK MD CAN’T EDIT CAN’T REC CD NO DISC DISC FULL FOCUS ERR MD ERR MD NO DISC MECHA ERR* (*:Number or symbol) NAME FUL.
48 MAINTENANCE ■ Internal care ● Do not touch the Laser pickup lens. If fingerprints or dust accumulate on the pickup , clean it gently with a dry cotton swab . ■ External care ● P er iodically wipe the cabinet with a soft cloth and a diluted soap solution, then wipe with a dr y cloth.
49 SPECIFICA TIONS As par t of our policy of continuous improv ement, SHARP reser ves the right to make design and speci- fication changes for product impro vement without prior notice. The perfor mance specification figures indicated are nominal values of production units.
50 MEMO.
TERMS OF GU ARANTEE Shar p Electronics (UK) Ltd. ("Shar p") guarantees to provide f or the repair , or at its option the replace- ment, of this product subject to the conditions listed below:- 1. This guarantee shall only apply to f aults which are due to inferior workmanship or materials.
Een belangrijk punt na aankoop van elk apparaat Sharp MD-M2H (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sharp MD-M2H heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sharp MD-M2H vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sharp MD-M2H leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sharp MD-M2H krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sharp MD-M2H bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sharp MD-M2H kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sharp MD-M2H . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
