Gebruiksaanwijzing /service van het product PC 15.11 van de fabrikant Sigma
Ga naar pagina of 36
DE US/GB FR DE US/GB FR HE ART RAT E MONITOR PC 15 .11 DEUTSCH ENGLISH FRANÇAIS.
36 www.sigmasport.com 1 Foreword 38 2 Packaging contents 38 3 Safety guidelines 39 4 Overview 39 4.1 Activating the heart rate monitor 39 4.2 Attaching the chest belt 40 4.3 Before training 41 4.4 Pressing and h olding down buttons 42 4.5 Overview of modes and functions 43 4.
37 US/GB 6 Training mode 57 6.1 Activating the training mode 57 6.2 Display setup 57 6.3 Button assignment in the training mode 58 6.4 Functions while training 58 6.5 Starting a training session 59 6.6 Interrupting a training session 60 6.7 Ending a training session 60 6.
38 www.sigmasport.com 1 FOREWORD Thank you for purchasing the SIGMA SPORT ® PC 15.11 heart rate monitor. Your new heart rate monitor will be a faithful training partner for many years to come.
39 US/GB 2 PACKAGING CONTENTS Transmitter 3 SAFETY GUIDELINES k Consult your doctor before starting training in order to avoid health risks. This particularly applies if you suff er from any cardiovascular diseases or have not done any sport for a long time.
40 www.sigmasport.com 4 OVERVIEW For women, attach the belt just below the breast. It must be possible to read the SIGMA logo at the front. Lift the belt slightly from the skin and wet the rear surface of the conductive ribbed rubber pads with water or moisten the pads with saliva.
41 US/GB 4 OVERVIEW Before you can start training, you need to prepare the heart rate monitor in the following manner: 2. Activate the PC 15.11 by pressing any button. 4.3 BEFORE TRAINING 3. The heart rate monitor automatically switches to training mode.
42 www.sigmasport.com 4 OVERVIEW 4.3 BEFORE TRAINING 5. To finish training, simply press the START/STOP button. The stopwatch stops. To reset the values to zero, press and hold the START/STOP button. To exit the training mode, press and hold the TOGGLE (-) button.
43 US/GB 4 OVERVIEW 4.4 PRESSING AND HOLDING DOWN BUTTONS The sleep mode will be displayed. Release the TOGGLE (-) button. 4.5 OVERVIEW OF MODES AND FUNCTIONS The heart rate monitor has three main modes (training mode, setting mode and sleep mode). You can switch between these modes by pressing and holding a button.
44 www.sigmasport.com 4 OVERVIEW In sleep mode, only the time and date are displayed. To switch from sleep mode to training mode, press and hold down any button. 4.5.1 SLEEP MODE You will train in this mode. *Note: To provide you with a clearer overview while training, the total values are only displayed if the stopwatch is not running.
45 US/GB 4 OVERVIEW 4.5.3 LAP VIEW The PC 15.11 can be used for lap training. The values for the individual laps are saved in the heart rate monitor. You can view the values in the lap view after and during your training. You can only activate the lap view from the training mode.
46 www.sigmasport.com Language (ES, FR, IT, GB, DE) Zone alarm (On, Off) Button tones (On, Off) Contrast (5 levels) Total Kcal (Entry) Date (Entry, Format) Total running time (Entry) Time (Entry, 12h, 24h) Gender (Male, Female) Training zone (Fat Burn, Fit Zone, Individual) Date of birth (Entry) Max.
47 US/GB 5 SETTING MODE 5.1 ACTIVATING THE SETTING MODE Prerequisite: Your heart rate monitor must be in training mode (see section 4.5 “Overview of modes and functions”). Hold down the TOGGLE (+) button. The display will flash twice to indicate that the setting mode is now active.
48 www.sigmasport.com 5.4 BRIEF GUIDE TO DEVICE SETTINGS Device settings such as language, gender, date of birth, weight, max. HR, contrast, button tones and zone alarm are all set in the same manner: Select the device setting, change the value and save the modified setting.
49 US/GB 5 SETTING MODE 5.5.2 SETTING THE DATE Prerequisite: Your heart rate monitor must be in setting mode. Press the TOGGLE (+) button repeatedly until “Date” appears on the display. Press the START/STOP button. “Year” is displayed and below it the preset year flashes.
50 www.sigmasport.com Press the TOGGLE (+) button repeatedly until “Clock” appears on the display. Press the START/STOP button. “24H” is displayed and flashes. Use the TOGGLE (-) or TOGGLE (+) button to choose between 12-hour and 24-hour format.
51 US/GB 5 SETTING MODE 5.5.4 SETTING THE GENDER Follow the steps described in section 5.4 “Brief guide to device settings”. This device setting is taken into account when calculating the maximum heart rate and calories. You should therefore ensure that you set this value correctly.
52 www.sigmasport.com 5.5.8 SETTING THE TRAINING ZONE You can choose from three training zones. The upper and lower limits for the zone alarm are determined by the zone that you select. Example: If you want to lose weight, select the “Fat Burn”. Prerequisite: Your heart rate monitor must be in setting mode.
53 US/GB 5 SETTING MODE Press the TOGGLE (+) button repeatedly to scroll until “Train. Zone” appears on the display. 5.5.10 SETTING UP AN INDIVIDUAL TRAINING ZONE Example: You would like to train in an individual training zone for a run with a change of pace.
54 www.sigmasport.com Press the START/STOP button. “Upper limit” is displayed. The registered value flashes. Press the TOGGLE (+) button repeatedly until the value is set to 160. Press the START/STOP button. The upper and lower limits are set. Press the START/STOP button.
55 US/GB 5 SETTING MODE 5.5.11 SETTING THE TOTAL RUNNING TIME Example: You have bought a heart rate monitor and want to take the total running time of 5 hours and 36 minutes from your training diary. Prerequisite: Your heart rate monitor must be in setting mode.
56 www.sigmasport.com Press the START/STOP button. The setting is saved. 5.5.11 SETTING THE TOTAL RUNNING TIME 5 SETTING MODE 5.5.12 SETTING THE TOTAL CALORIES 5.5.13 SETTING THE CONTRAST Follow the steps described in section 5.5.11 “Setting the total running time”.
57 US/GB 6 TRAINING MODE 6.1 ACTIVATING THE TRAINING MODE To go to the training mode: k From sleep mode Press and hold any button. k From setting mode Press and hold the TOGGLE (+) button. 6.2 DISPLAY SETUP k Arrow next to the HR value In the example, the heart rate is below the selected training zone and should be increased.
58 www.sigmasport.com 6 TRAINING MODE 6.3 BUTTON ASSIGNMENT IN THE TRAINING MODE START/STOP Press: Start/stop the stopwatch Press and hold: Set the training values to zero (reset) LAP Press: Take the .
59 US/GB 6 TRAINING MODE START/STOP Press: Start/stop the stopwatch Press and hold: Set the training values to zero (reset) 6.4 FUNCTIONS WHILE TRAINING Use the TOGGLE (-) or TOGGLE (+) buttons to select which function you want to see in the lower display area.
60 www.sigmasport.com Press the START/STOP button. The stopwatch icon disappears. The stopwatch stops. Press the START/STOP button again. The stopwatch icon reappears. The stopwatch restarts. Press START/STOP button as soon as you want to end your training.
61 US/GB 6 TRAINING MODE 6.8 TRAINING VALUES AFTER TRAINING Prerequisite: You must be in training mode. After training, you can view the measured values in the training mode at your leisure. Use the START/STOP, TOGGLE (-) and TOGGLE (+) buttons to scroll through the individual values.
62 www.sigmasport.com 7 TRAINING WITH LAPS 7.1 USING LAP TRAINING 1 Prerequisite: You must be in training mode. The stopwatch is not running and is set to zero. 2 Start first lap. Press the START/STOP button. The stopwatch is started. 4 Stop the training after the last lap.
63 US/GB 7 TRAINING WITH LAPS 7.2 SUMMARY OF THE LAST LAP If you press the LAP button, the current lap will be ended and a new l ap automatically started. “Last lap” flashes on the display and a summary of the last lap is displayed for five seconds.
64 www.sigmasport.com 7 TRAINING WITH LAPS 7.3.1 ACTIVATING THE LAP VIEW MODE Prerequisite: Your heart rate monitor must be in training mode. Hold down the LAP button. The display will flash twice to indicate that the lap view mode is now active. 7.3.
65 US/GB 7 TRAINING WITH LAPS 7.3.3 BUTTON ASSIGNMENT FOR THE LAP VIEW LAP 10 Average heart rate LAP 1 LAP 9 Maximum heart rate LAP 2 LAP 8 Calories LAP 3 Hours since start LAP 7 LAP 4 LAP 6 LAP 5 Tim.
66 www.sigmasport.com 7 TRAINING WITH LAPS 7.3.4 DISPLAYING VALUES FOR INDIVIDUAL LAPS 7.4 FAQ (FREQUENTLY ASKED QUESTIONS AND SERVICES) You can re-view the different measured values for the individual laps. Prerequisite: Your heart rate monitor must be in training mode.
67 US/GB 7 TRAINING WITH LAPS The display responds sluggishly or shows a black coloration, what is the reason for this? The operating temperature may have been exceeded or f allen below. Your heart rate monitor is designed for a temperature of 0°C to 55°C.
68 www.sigmasport.com LI = Lithium Ionen LI 8 MAINTENANCE AND CLEANING 8.2 DISPOSAL Electronic devices must not be disposed of with household waste. Please give the device to a designated disposal agency. Batteries must not be disposed of with the household waste (Battery Law).
69 US/GB 9 TECHNICAL DATA 9 TECHNICAL DATA Warranty We are liable for damages in accordance with the statutory regulations in respect to our contractual partners.
HE ART RATE MONIT OR PC 15 .11 www.sigmasport.com SIGMA-ElEktro GmbH Dr. - Julius - Leber - Straße 15 D - 67433 Neustadt /Weinstraße Tel. + 49 (0) 63 21- 9120 - 0 Fax. + 49 (0) 63 21- 9120 - 34 E - mail: info@sigmasport.com SIGMA SPort ASIA Asia, Australia, South America, Africa 10F, No.
Een belangrijk punt na aankoop van elk apparaat Sigma PC 15.11 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sigma PC 15.11 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sigma PC 15.11 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sigma PC 15.11 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sigma PC 15.11 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sigma PC 15.11 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sigma PC 15.11 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sigma PC 15.11 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
