Gebruiksaanwijzing /service van het product 04-0476A van de fabrikant SIIG
Ga naar pagina of 8
1 SATA-to-IDE Adapter Quick Installation Guide 04-0476A Introducing the SATA-to-IDE Adapter The SATA-to-IDE Adapter allows you to connect existing Ultra ATA 150/133/100/66 hard disk drive and ATAPI devices to the latest Serial ATA host adapter.
2 System Requirements • Pentium ® or equivalent PC with an available Serial ATA port • Windows ® 2000/XP (32-/64-bit)/Server 2003 (32-/64-bit)/Vista (32-/64-bit) Package Contents • SATA-to-IDE.
3 Hardware Installation Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer case for a few seconds. Avoid any contact with internal parts and handle cards only by their external edges.
4 5. Connect the SATA data cable to the adapter, refer to figure 6 and 7 . Figure 6 Figure 7 6. Connect the "Y" split power cable to the adapter, refer to figure 8 and 9 . Figure 8 Figure 9 7. Connect the other end of the SATA data cable to the SATA port on the SATA host adapter or motherboard.
5 8. Connect the "Y" split power connector to power the IDE drive, refer to figure 10 . Figure 10 9. Connect the other end of the “ Y ” split power cable to the system power source. 10. The hardware installation is completed now. 11. Replace the computer cover and reconnect the power cord.
6 Blank Page.
7 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
SATA-to-IDE Adapter is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Een belangrijk punt na aankoop van elk apparaat SIIG 04-0476A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen SIIG 04-0476A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens SIIG 04-0476A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding SIIG 04-0476A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over SIIG 04-0476A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van SIIG 04-0476A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de SIIG 04-0476A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met SIIG 04-0476A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.