Gebruiksaanwijzing /service van het product 2690445 Citation van de fabrikant Simplicity
Ga naar pagina of 66
Parts Manual Rev. 8/2008 Citation Series Zero-Turn Riders & Mower Decks TP 400-7287-S-CI-S Mf g . No. Descri p tion 21HP Product 2690444 Citation, 21HP Briggs & Str atton Zero Turn Rider w/48" Mower Mf g . No. Descri p tion 23HP Product 2690445 Citation, 23HP Briggs & Str atton Zero Turn Rider w/52" Mower 1733092 Part No.
.
Table Of Content s Torque Specification Chart .......... ........................ ............. ...................... Inside Back Cover PRODUCT COMPONENTS PAGES Main Frame & Fro nt Suspension Group ....... ...................................... .
Main Frame & Front Suspension Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287frm0 The above p arts gr oup applies to th e following Mfg. Nos.: 4 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Main Frame & Front Suspension Group Footnotes MAIN FRAME ASSEMBLY (Serial No.: 2013170250 & Below) 1 5400257CSM 1 GREASE SEAL 2 5021072SM 2 COTTER PIN, 1/8&qu.
Rear Bumper Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287bmp1 The above p arts gr oup applies to th e following Mfg. Nos.: 6 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Rear Bumper Group Footnotes MAIN FRAME 1- - HEAT SHIELD 2 5401174CSM 1 BUMPER 3 5403268CSM 1 PLATE, SEAT BELT ANCHOR - LH 4 5400844CSM 1 PLATE, SEAT BELT ANCHOR - RH .
Engine & PTO Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287engb0 The above p arts gr oup applies to th e following Mfg. Nos.: 8 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Engine & PTO Group Footnotes MAIN FRAME 1- - ENGINE, 21HP Briggs & Stratton (Model 3857 77) 2- 1 ENGINE, 23HP Briggs & Stratton (Model 3867 77) 2- 1 CRANKSHAFT PULLEY 3- 1 SPACER, 1.13 X 1.75 X .97 4 5046845SM 1 CLUTCH 5 5023432SM 1 SPACER, .
Instrument Control Panel Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287ins0 The above p arts gr oup applies to th e following Mfg. Nos.: 10 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Instrument Control Panel Group Footnotes SWITCH RETAINER RING 1 5022222SM 1 NUT, 3/8-24 Hex 2 5025039SM 1 SWITCH , LIGHT 3 1703799SM 1 SCREW, Alle n Head, 1 /4-20 x 1.
Pump Drive Gr oup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287pdr0 The above p arts gr oup applies to th e following Mfg. Nos.: 12 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Pump Drive Gr oup Footnotes MAIN FRAME 1- - KEY, 5MM SQ. x 25MM w/ Round Ends 2 5023254SM 2 CRANKSHAFT PULLEY 3 5047075SM 1 BELT, PUMP DRIVE, BANDED 4 5100555SM 1 NUT.
Motion Control Group - S/N: 201317250 & Below NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287mcg0 The above p arts gr oup applies to th e following Mfg. Nos.: 14 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Motion Control Group - S/N: 201317250 & Below Footnotes MAIN FRAME 1- - BOLT, 5/16-18 X 1" 2 5025011X8SM 6 WASHER, 5/16" Lock 3 5025170SM 4 WASHER, 5/16.
Motion Control Group - S/N: 201317250 & Below NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287mcg0 The above p arts gr oup applies to th e following Mfg. Nos.: 16 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Motion Control Group - S/N: 201317250 & Below Footnotes NUT, 5/16-18 Hex Large Serrated Flange 45 5025139SM 4 NUT, 5/16-18 Hex Small Serrated Flange 46 1931277SM .
Motion Control Group - S/N: 201317251 & Above NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301479 The above p arts gr oup applies to th e following Mfg. Nos.: 18 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Motion Control Group - S/N: 201317251 & Above Footnotes ROD, NEUTRAL RETURN 1 510094 7SM 2 SPRING, REVERSE RETURN 2 5022645SM 2 BUSHING, NYLON 3 5023260SM 2 BUSHING, FLANGED .375 X .630 X 2.00 4 5100942SM 2 COLLAR, 3/8" SET 5 5010546SM 4 WASHER, 3/8 SAE 6 5025156SM 2 PIN, HA IR, .
Motion Control Group - S/N: 201317251 & Above NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301479 The above p arts gr oup applies to th e following Mfg. Nos.: 20 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Motion Control Group - S/N: 201317251 & Above Footnotes WELD, SHAFT MOTION CONTROL-LH-IS 500-ORG 45 5402588CSM 1 The above p arts gr oup applies to th e following Mfg. Nos.: 21 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Hydraulic Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287hyd0 The above p arts gr oup applies to th e following Mfg. Nos.: 22 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Hydraulic Group Footnotes CAP, Hy draul ic Oi l Only 1 5100017SM 1 HYDRAULIC OIL RESERVOIR, Complete 2 5061712SM 1 FITTING, Elbow, 3/8" 3 502311 8SM 1 GROMMET 4 1726400SM 1 GROMMET 5 5023121SM 1 FITTING, Elbow, 5/8" 6 502311 9SM 1 CLAMP, #10 Hose 7 5021164SM 2 HOSE, Hydraulic, 24.
Hydraulic Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287hyd0 The above p arts gr oup applies to th e following Mfg. Nos.: 24 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Hydraulic Group Footnotes FAN SHROUD (S/N: 2012607200 & ABOVE) 39 5100162SM 1 The above p arts gr oup applies to th e following Mfg. Nos.: 25 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Hydraulic Mount Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287hyt0 The above p arts gr oup applies to th e following Mfg. Nos.: 26 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Hydraulic Mount Group Footnotes MAIN FRAME 1- - NUT, 1/4-20 HEX NYLOCK FLANGE 2 5025391SM 4 CLAMP, VINYL, 1" 3 502317 3SM 1 BOLT, 3/8-16 X 1-1/4 " 4 5025013.
Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287egb1 The above p arts gr oup applies to th e following Mfg. Nos.: 28 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Electrical Group Footnotes SWITCH , Igni tion , Compl ete 1 1686734SM 1 KEY, Ignition Molded 2 1717163SM 1 COVER 3 1704346SM 1 PLASTIC NUT 4 5022791SM 1 SWITCH , PTO 5 1722887SM 1 HOUR METE R 6 1731184SM 1 HEADLIGHT SWITCH 7 1703799SM 1 NUT, #10-24 Hex Nylon Lock 8 5025271SM 2 SPACER, .
Seat, Mount & Fl oor Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287stm0 The above p arts gr oup applies to th e following Mfg. Nos.: 30 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Seat, Mount & Fl oor Group Footnotes MAIN FRAME 1- - BOLT, 5/16 -18 X 1 2 502501 1X8SM 4 WASHER 5/16" Gr. 9 Flat 3 5025292SM 4 NUT, 5/16-18 Hex Nylock Flange.
Fuel Supply Hose Group & Tank Replacement Parts G roup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287fsh0 The above p arts gr oup applies to th e following Mfg. Nos.: 32 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Fuel Supply Hose Group & Tank Replacement Parts G roup Footnotes CLAMP, HOSE, EXTERNAL, 1/2 - RED 1 5020835SM 2 HOSE, 1/4" FUEL, 16.
Fuel Tank & Mount Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287tnk0 The above p arts gr oup applies to th e following Mfg. Nos.: 34 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Fuel Tank & Mount Group Footnotes MAIN FRAME 1- - SCREW, Allen Head, #10-24 x 3/8" 2 5025386SM 6 MOUNT, TAN K, FRONT 3 5400012CSM 2 BOLT, 3/8-1 6 X 1" G.
Parking Brake Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287pbr0 The above p arts gr oup applies to th e following Mfg. Nos.: 36 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Parking Brake Group Footnotes MAIN FRAME 1- - MOTOR MOUNT 2- - BOLT, 5/16-18 X 3/4 12PT FLANGE - PATCH 3 5023490SM 8 WASHER, 1 x 2 4 5023249SM 2 BOLT , 3 /8-16 X 3/ 4.
Rear Suspension Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287susr0 The above p arts gr oup applies to th e following Mfg. Nos.: 38 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Rear Suspension Group Footnotes MAIN FRAME 1- - BOLT, 1/2-13 X 6-1/2 " 2 5025017X52SM 2 WASHER, 1/2" SAE 3 5025158SM 10 SHOCK ASSEMBLY 4 5023436SM 2 BOLT, 3/8-16 X 1-1/4 " 5 5025013X10SM 12 WASHER, 3/8" GR.
Deck Lift Group - S/N: 2013202961 & Below NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287dlt0 The above p arts gr oup applies to th e following Mfg. Nos.: 40 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Deck Lift Group - S/N: 2013202961 & Below Footnotes MAIN FRAME 1- - MOTOR MOUNT 2- - HITCH PIN, 1 /2 X 2" 3 5023498SM 1 BOLT, 3/8-16 X 1-1/4 " 4 5025013X10SM 6 WASHER, 3/8 GR.
Deck Lift Group - S/N: 2013202961 & Below NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287dlt0 The above p arts gr oup applies to th e following Mfg. Nos.: 42 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Deck Lift Group - S/N: 2013202961 & Below Footnotes DECK LIFT ROD 45 5049848SM 2 DECK LIFT PIVOT, LH (S/N: 2000484318 - 2013202961) 46 5402814CSM 1 DECK LIFT PIVO.
Deck Lift Group - S/N: 2013202962 & Above NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287dlt1 The above p arts gr oup applies to th e following Mfg. Nos.: 44 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Deck Lift Group - S/N: 2013202962 & Above Footnotes MAIN FRAME 1- - MOTOR MOUNT 2- - HITCH PIN, 1 /2 X 2" 3 5023498SM 1 BOLT, 3/8-16 X 1-1/4 " 4 5025013X10SM 6 WASHER, 3/8 GR.
Deck Lift Group - S/N: 2013202962 & Above NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287dlt1 The above p arts gr oup applies to th e following Mfg. Nos.: 46 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Deck Lift Group - S/N: 2013202962 & Above Footnotes DECK LIFT ROD 45 5049848SM 2 DECK LIFT PIVOT, RH 46 540281 5CSM 1 DECK LIFT PI VOT, LH 46 5402814CSM 1 REAR DE.
Wheel & Tire Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287whl0 The above p arts gr oup applies to th e following Mfg. Nos.: 48 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Wheel & Tire Group Footnotes WHEEL & TIRE ASSEMBLY, 13 x 5.0 - 6, Complete 1 5022631SSM 2 * FLAT-FREE TIRE ASSEMBLY, 13 x 5.
Decals - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287dclb The above p arts gr oup applies to th e following Mfg. Nos.: 50 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Decals - Brand & Model Footnotes DECAL, Simplicity Logo 1 1722551SM 1 DECAL, Citation 2 5061821SM 1 DECAL, Ba dge, RH 3 5061817SM 1 DECAL, Ba dge, LH 4 5061816SM .
Decals - Safety & Operation NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287dcls The above p arts gr oup applies to th e following Mfg. Nos.: 52 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Decals - Safety & Operation Footnotes DECAL, Main 1 5100252SM 1 DECAL, Danger (Chute In Place) 2 5100137SM 1 DECAL, Danger (Hand Under Deck) 3 5100136SM 1 DECAL, .
48" & 52" Mower D eck - Hanger Chains NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 2875ch0 The above p arts gr oup applies to th e following Mfg. Nos.: 54 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 48" & 52" Mower D eck - Hanger Chains Footnotes MOW ER DEC K 1- - NUT, 1/2-13 HEX 2 502503 8SM 2 NUT, 1/2-13 HEX NYLON LOCK 3 5025056SM 2 WASHER, 1/2&qu.
48" & 52" Mower Deck - Ho usin g, Cover, Spindle & Blade NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 2875hc0 The above p arts gr oup applies to th e following Mfg. Nos.: 56 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 48" & 52" Mower Deck - Ho usin g, Cover, Spindle & Blade Footnotes WASHER, 5/16" SAE 1 5025155SM 8 BODY CLIP, 5/16-18 2 5022308SM 6 BOLT, 5/16 .
48" & 52" Mower Deck - Pu l leys, Belts & Idler Arm NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 2875pb0 The above p arts gr oup applies to th e following Mfg. Nos.: 58 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 48" & 52" Mower Deck - Pu l leys, Belts & Idler Arm Footnotes MOW ER DEC K 1- - NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) 2 1931277SM 2 KEY, 1/4 SQ.
48" & 52" Mower Deck - Ro llers NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 2875rl0 The above p arts gr oup applies to th e following Mfg. Nos.: 60 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 48" & 52" Mower Deck - Ro llers Footnotes WASHER 3/8" SAE 1 5025156SM 2 NUT, 3/8-16 Hex Nylock Flange 2 5025394SM 4 SPACER, .
48" & 52" Mower Deck - Sp i ndle Service Parts Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287spn0 The above p arts gr oup applies to th e following Mfg. Nos.: 62 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 48" & 52" Mower Deck - Sp i ndle Service Parts Group Footnotes SPINDLE ASSEMBLY, Complete 1 5061095SM 3 GREASE FIT TING 2 5023329SM 3 NUT, 3/4-16 Hex 3 .
.
T or que Specification Char t FOR ST ANDARD MACHINE HARDW ARE (T olerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.
500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.com MANUFACTURING, IN C. 2008 Copyright © by Briggs and Str atton Corporation Briggs and Stratton Yard Power Prod ucts Group Milwaukee, WI, USA.
Een belangrijk punt na aankoop van elk apparaat Simplicity 2690445 Citation (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Simplicity 2690445 Citation heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Simplicity 2690445 Citation vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Simplicity 2690445 Citation leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Simplicity 2690445 Citation krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Simplicity 2690445 Citation bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Simplicity 2690445 Citation kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Simplicity 2690445 Citation . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
