Gebruiksaanwijzing /service van het product 42E66A van de fabrikant Skyworth
Ga naar pagina of 24
Instruction Manual Instruction Manual 42E66A 42E66A.
-1- WARNINGS AND PRECAUTIONS ...............................................................2-3 CONTENT ........................................................................................................1 Antenna/Cable Connection ................
WARNINGS AND PRECAUTIONS -2- Read instructions before operating the set. Keep these instructions well for future reference. all the Warning The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be placed on top of the apparatus.
-3- Educate onto the children about the dangers of climbing furniture to reach the television or its controls. The apparatus should be provided with a restraining device such as a fixing point to facilitate restraining the apparatus from toppling forward.
BASIC FUNCTION 1. Embedded digital color gain control better brightness and reality . 2. Embedded 5-line comb filter . 3. 4. High class LED screen high brightness, high 5. 6 7. This T V can be used as a high-performance PC monitor it has a VGA interface.
Positioning The TV Set Install Display solid horizontal surface such as a table or For ventilation, leave a space of at least 10cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. This apparatus can be used in tropical and/or moderate climates.
2.Power Indicator / Remote Sensor 1.Power Button 3.Speakers 4.Program Up/Down Button 5.Volume Up/Down Button 6.Menu Button 7.Source Button 8.Standby Button 4 5 6 7 8 3 2 1 3 EXTERNAL SCHEMA TIC AND INST ALLA TION Front Panel Note : The graphics are for representation only.
EXTERNAL SCHEMA TIC AND INST ALLA TION Back Panel Note : The graphics are for representation only . -7- 1. HDMI1HDMI2HDMI3: Connect HDMI input signal from signal source such as DVD. 2. PC IN: Connect a PC via a VGA cable. 3. PC AUDIO IN: Au dio input when the signal is DVI timing.
Antenna /Cable Connection There are two kinds of in use. antennas VHF/UHF To TV VH F/UHF ANTENNA jack (75 ) TWO KINDS OF ANTENNA VHF TV ANTENNA UHF TV ANTENNA U/V MIXER No need to install adapter COAXIAL ANTENNA (Note 1) (Note 2) FLAT CABLE Need to install adapter 1.
Remote Control EXTERNAL SCHEMA TIC AND INST ALLA TION -9- 1.POWER( ) Press to turn the TV on or standby. 3.Picture Mode(P .M.) Press to select the desired picture mode. 4.Sound Mode(S.M.) Press to select the desired sound mode. 5.Zoom Press the desired picture format.
Remote Control EXTERNAL SCHEMA TIC AND INST ALLA TION -10- 20 21 22 23 24 20.Subtitle Press to open or close the subtitle. 21.EPG Press to display the current EPG information in DTV mode. 22.Favorite Channel(FA V.) Press to view your assigned favorite channels.
Remote Control EXTERNAL SCHEMA TIC AND INST ALLA TION -1 1- 27.TEXT Buttons(Option) Press to enter the teletext menu. CANCEL Press this button to return to TV program temporarily while searching for a T eletext page. When the search is done, the page number will be displayed on the upper left of the screen.
PERSONAL VIDEO RECORDING (PVR) 1.Please insert the external high-speed storage 2.Select the TV program and channel you wish to record. 3.Press [REC. ] button to enter PVR mode and start recording. PVR control bar on the screen You can select the appropriate settings required.
If you know the programming details: 1. In DTV mode and with a USB device properly plugged in, go to the channel that will broadcast the program you want to record. 2. Press the EPG button on your remote control to bring up the EPG interface. The channel you are watching will be highlighted on the screen that appears.
EPG stands for Electronic Program Guide. It is supplied by the program providers and offers information about the programs to be broadcast. Y ou can access it in digital mode by pressing the EPG button on the remote control.
EPG (Electronic Program Guide) Recorder Press the RED button to display the recorder menu (right) to see detailed information about the different ways of recording television programs onto a USB device. Info Press the GREEN button to show information about the selected program.
Picture Mode Adjusts the picture mode: Standard, Mild, Personal, Dynamic. " "" "" "" " "" "" "" Brightness , Contrast , Color , Tint and Sharpness can only be adjusted when Picture Mode is set to Personal .
MENU CONTROL Medium: Keep the original white Warm: Red : The user may customize the colour temperature.(Red/Green/Blue). Cool: Blue. Display Mode Seven modes are available including Just Scan, Auto, Panoramic, Zoom1, Zoom2,16:9 and 4:3. DNR Four modes of digital noise reduction are available including Off, Low, Middle and High.
MENU CONTROL -18- Auto Search Press / to select Auto Search, then press [OK] buttons Channel Settings Note: These settings are only available in and DTV+ATV mode. ATV , DTV CHANNEL Auto Search DTV Manual Search A TV Manual Search Programme Edit Signal Information Signal Information Show the quality and signal strength of the channel.
MENU CONTROL OSD Language Select you desired OSD language. Hearing impaired This function is prepared for the hearing impaired people. When the status is on, subtitles will show up on the screen. Setup Settings Country Change your local country setting.
MENU CONTROL -20- Set Password To se t your own password, first enter the old password, and then enter your new password twice, following the prompts as illustrated below . Advanced Settings SW. Update(USB) Update the firmware of this model. 1. Rename the latest firmware to "MERGE.
MENU CONTROL -21- PC Settings When "PC", the settings manually buttons buttons buttons buttons buttons size you connect VGA cable to the jacks of PC and select the signal source as screen menu will be activated. You can use the function to adjust the display automatically or .
NO PICTURE, NO SOUND 1. Check if the fuse or circuit breaker is working. 2. Plug another electrical device into the outlet to make sure is working or turned on. 3. 4. Check the signal source. the outlet Check if the power plug is in poor contact with the outlet.
SPECIFICA TIONS Audio output power (L+R): Working voltage: Rated power consumption: Screen size - diagonal: Dimensions (W x D x H): Net weight: Screen resolution: System: Status displaying method: On .
Een belangrijk punt na aankoop van elk apparaat Skyworth 42E66A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Skyworth 42E66A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Skyworth 42E66A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Skyworth 42E66A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Skyworth 42E66A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Skyworth 42E66A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Skyworth 42E66A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Skyworth 42E66A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
