Gebruiksaanwijzing /service van het product 45 van de fabrikant Smart Technologies
Ga naar pagina of 60
Confi guration and User’ s Guide Unifi ™ 45 Pr ojector Retrofi t Kit for SMAR T Board™ 500 Series Inter active W hiteboards.
FCC Warn ing Th is e qu ip me nt h as b e en t es t ed a nd f ou nd t o co mp ly w it h the l im it s fo r a Cl as s A di gi ta l de vi ce , pu r su an t to Pa r t 15 of th e FCC R ul es .
99-00881-20 A0 Important Information i Import ant Information Read This Section First NOTE: If you own a SMART product other than a Unifi™ 45 pro jector retrofit kit for SMART Board 500 series interactive whiteboards, refer to the installation manual that came with your product for relevant warnings and maintenance instructions.
ii Important Information 99-00881-20 A0 Safety Warnings W ARNING • Failure to follow the installation instruct ions included in this manual and other guides packaged with your Unifi 45 projector retrofit kit could result in personal injury or damage to the product.
99-00881-20 A0 Important Information iii W ARNING • If the lamp has shattered or burst, do not touch the glass fragments because they might cause injury . Leave and then ventilate the area where the lamp shattered or burst. Wash your hands thoroughly if you have come into contact with lamp de bris.
iv Important Information 99-00881-20 A0 Other Precautions T o ensure operating safety and to avoid product damage, observe the following precau tions. • Never operate this unit immediately after moving it from a cold location to a warm location.
99-00881-20 A0 Table of Contents v T able of Content s Important Information i Read This Section First ................................................................................................................................... i Safety W arnings .
vi Table of Contents 99-00881-20 A0 Customer Support 47 Online Support ............................................................................................. ................................................ 47 T raining ........................
99-00881-20 A0 About Your Unifi 45 Projector Retrofit Kit 1 About Y our Unifi 45 Pr ojector Retrofit Kit In This Chapter Y our Unifi 45 projector retrofit kit enables you to combine the SMART Unifi 45 wall mounted short-throw projector with your SMART Board 580 or 560 interactive whiteboard to creat e a complete interact ive whiteboar d system.
2 About Your Unifi 45 Projector Retrofit Kit 99-00881-20 A0 Unifi 45 Projector System Fea tures The Unifi 45 projector system includes a short thr ow , hi gh-offset projector for use with your SMART Board 500 series interactive whit eboard, an Extended Control P anel (ECP) and a sturdy suppor t system for classroom environments.
99-00881-20 A0 About Your Unifi 45 Projector Retrofit Kit 3 St andard Ac cessories SMART provides the following accessories with your Un ifi 45 projector retrofit kit.
4 About Your Unifi 45 Projector Retrofit Kit 99-00881-20 A0.
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retr ofit Kit 5 Before Inst alling Y our Unif i 45 Projector Retrofit Kit In This Chapter For instructions on installing your Unifi 45 project or retr ofit kit, consult the installation documen ts found in your Unifi 45 projector boxes.
6 Before Installing Your Unifi 45 Projector Retr ofit Kit 99-00881-20 A0 Environment al Requirement s Before installing your Unifi 45 projector retrofit ki t, review the following e nvironmental requirements. CAUTION • Never operate this unit immediately after moving it from a cold location to a warm locat ion.
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retr ofit Kit 7 Before Inst alling Y our SMART Bo ard Interactiv e Whiteboard Sy stem Choose a location for your SMART Board interactive whitebo ard system that’s far from bright light sources, such as a window or overhead lighti ng.
8 Before Installing Your Unifi 45 Projector Retr ofit Kit 99-00881-20 A0 Af ter Insta lling Y our Interactive Whiteboard System After you install the Unifi 45 projector with your SMART Board 500 eries interactive whiteboard, you must adjust the image alignment and focus.
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retr ofit Kit 9 The image appears taller on the left side when the distance fr om the projector mirror to the right of the screen is shorter than the distance to the left of the screen.
10 Before Installing Your Unifi 45 Projector Retr ofit Kit 99-00881-20 A0 3. If the distance isn’t correct, adjust t he center hex screw at the base of the projector boom to ra ise or lower the angle of the boom. TIP Y ou may find it easie r to turn the height adj ustment screw if an assistant lifts up the installed boom.
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retr ofit Kit 11 NOTE: This procedure sets the mirror to a ne utral positi on. However , further adjustments will be required. 1. Remove the boom’s front cover . Y ou can now access the adjustment screws.
12 Before Installing Your Unifi 45 Projector Retr ofit Kit 99-00881-20 A0 2. Using the included hex key , adjust hex screw 3 to adju st the mirror ’s depth for your model of interactive whiteboard, as shown. 3. Adjust thumbscrew 1 to center the mirror ’s vertical angle, as shown.
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retr ofit Kit 13 1. Adjust thumbscrew 2 to center t he mirror ’s horizontal angle, as shown. NOTE: These images show the mirr or from below . Make sure that the mirror isn’t angled too far left or too far right.
14 Before Installing Your Unifi 45 Projector Retr ofit Kit 99-00881-20 A0 Focusing and Alignin g the Image T o focus and align the image, project either a computer image, or the projector ’s SMAR T T echnologies logo, onto your SMART Board interactive whiteboard.
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retr ofit Kit 15 Use the following procedure to obtain a rectangular im a ge that is slightly smaller than the interactive whiteboard’s screen. NOTES • We recommend that you project a computer image whil e performing the following steps.
16 Before Installing Your Unifi 45 Projector Retr ofit Kit 99-00881-20 A0 3. Adjust the center hex screw at the projector boom’s base to adjust the vertical keystone until the left and right side of the image are parallel. Use in combi nation with thumbscrew 1 shown in the following steps.
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retr ofit Kit 17 6. Use the included hex key to adjust hex screw 3 to change the size of the image. NOTE: Adjusting this screw may affect the other adjustments. 7. Repeat steps 1 through 6, using smaller increments.
18 Before Installing Your Unifi 45 Projector Retr ofit Kit 99-00881-20 A0.
99-00881-20 A0 Connecting Your Interactive Whiteboard System 19 Connecting Y our Intera ctive Whiteboard System In this Chapter When you connect a computer with SMART Notebook software, you can display and interact w ith Ink Aware programs on your SMART Board interactive whiteboard system.
20 Connecting Your Interactive Whiteboard System 99-00881-20 A0 Connecting Y our Computers to the Interactive Whiteboard System Y ou must connect your compute rs’ video and audio outputs to your Unifi 45 projector or your Exte nded Control Panel (ECP).
99-00881-20 A0 Connecting Your Interactive Whiteboard System 21 Connecting Audio/Visual Outp uts from Y our Guest C omputer to Y our Interactive Whiteboard System’s ECP Input 1. Make sure that you have a shielded VGA cable (not included) and an audio cable with 3.
22 Connecting Your Interactive Whiteboard System 99-00881-20 A0 Connecting Peripheral Visual or Audio-Visual Devices T o conne ct a DVD player , VCR, document camera, digita l camera or other visual o.
99-00881-20 A0 Using Your Interactive Whiteboard System 23 Using Y our Interactive Whiteboard System In This Chapter This chapter describes the basic oper a tion of your interactive whiteboard system, how to retrieve system information and how to access the pr ojector ’s image adjustment options.
24 Using Your Interactive Whiteboard System 99-00881-20 A0 Using Y our Extended Control Panel (ECP) Y our ECP includes a Power button and four Inpu t Selection buttons. The ECP enables you to connect up to three peripheral devices and one host computer at the same time.
99-00881-20 A0 Using Your Interactive Whiteboard System 25 Using Y our Remote Control The Unifi 45 projector system remote contr ol enables you to open on-screen projector menus and change the projector settings. Y ou can also use the remote control’s On/S t andby button to turn the projector system on or off.
26 Using Your Interactive Whiteboard System 99-00881-20 A0 Adjusting Y our Projector Settings Image Adjustment Options Contrast This option adjusts projector contrast, from -16 to 16. Brightness This option adjusts projector brightness, from -16 to 16.
99-00881-20 A0 Using Your Interactive Whiteboard System 27 Setting Display Screen Size This option adjusts the projector picture size. Language Support Projector menu support is ava ilable in English .
28 Using Your Interactive Whiteboard System 99-00881-20 A0 Power On This option enables you to set the Power On setting to Manual (recommended) or Auto . Selecting Auto automatically starts up the projector when the main power is activated. Default Setting 2 Projection Mode This option enables you to choose from various projectio n positions.
99-00881-20 A0 Using Your Interactive Whiteboard System 29 Lamp Reset Count This field shows the number o f times the Lamp Time has been reset. To t a l T i m e This field shows your inter active whiteboard s ystem’s operating time since initial startup.
30 Using Your Interactive Whiteboard System 99-00881-20 A0.
99-00881-20 A0 Maintaining Your Unifi 45 Projector System 31 Maint aining Y our Unifi 45 Projector System In This Chapter This chapter describes methods t o prevent damag e to your Unifi 45 projector system and explains how to properly clean and care for it.
32 Maintaining Your Unifi 45 Projector System 9 9-00881-20 A0 Replacing Y our Projector Lamp If a lamp fails or if a replacement message appears on t he screen, a qualified person can replace the p rojector lamp. Do not access the service panel without a replacement lamp and instructions in hand.
99-00881-20 A0 Maintaining Your Unifi 45 Projector System 33 1. Put the system in S tandby mode by pressing the power button on the ECP . Wait for the system to enter St andby mode, and then turn the projector ’s master power switch off to shut down the system.
34 Maintaining Your Unifi 45 Projector System 9 9-00881-20 A0 1. Complete the last step of the replacement projector lamp instru ctions. 2. Attach the projector plate to the projector using the three screws that you removed from the projector pla te assembly .
99-00881-20 A0 Maintaining Your Unifi 45 Projector System 35 T ransporting Y our Projector System Save your original Unifi 45 projector retr ofit kit pack aging so that it’ s available if you need to transpor t your system. When required, repack it with as much of the original packaging as possible.
36 Maintaining Your Unifi 45 Projector System 9 9-00881-20 A0.
99-00881-20 A0 Troubleshooting Your Interactive Whiteboard System 37 T roubleshooting Y our Inte ractive Whiteboard System In this Chapter This chapter deals with basic troubl eshooting issues for your SMART Bo ard interactive whiteboard system that you can easily solve.
38 Troubleshooting Your Interactive Whiteboard System 99-00881- 20 A0 Projector Ready Lights and Projector St atus The three projector ready lights are located on the underside of the projector . They are marked Lamp, On/S tandby and T emp (for temperature).
99-00881-20 A0 Appendix A: Remote Management of Your Interactive Whiteboard System 39 Appendix A: Remote Manage ment of Y our Interactive Whiteboard System In This Section This appendix provides detailed instruct ions on how to set up your computer or your r oom control system to manage your SMART Board interactive whiteboard system settings.
40 Appendix A: Remote Management of Your Interactive Whiteboard Syste m 99-00881-20 A0 Serial Interface Settings Y ou must configure your computer ’s serial communica tion program or your room control system’s serial communication settings with the following values: NOTE: Commands must be typ ed in ASCII forma t.
99-00881-20 A0 Appendix A: Remote Management of Your Interactive Whiteboard System 41 The embedded firmware program coordinates command sequencing and is capable of buffering up to 127 commands. In each power state, the buffer accepts va lid commands until the program can process them.
42 Appendix A: Remote Management of Your Interactive Whiteboard Syste m 99-00881-20 A0 1. T ype on , and then press ENTER. 2. T ype set input vga1 , and then press EN TER.
99-00881-20 A0 Appendix A: Remote Management of Your Interactive Whiteboard System 43 Query Commands * This command bypasses internal buf fering and generates a response immediately . Projector Power Control Commands ** Y ou must send the off command twice.
44 Appendix A: Remote Management of Your Interactive Whiteboard Syste m 99-00881-20 A0 Set Commands Command Result Response (On-Screen) set input vga1 Selects the VGA1 projector input Input = vga1 set.
99-00881-20 A0 Regulatory Compliance 45 Regulatory Compliance W aste Electri cal an d Elec tronic Equipment Regulations W aste Electrical and Electronic Equipm ent regulations a pply to all electr ical and electronic equipment sold within the European Union.
46 Regulatory Compliance 99-00881-20 A0.
99-00881-20 A0 Customer Support 47 Customer Support Online Support Vis it www.smarttech.com/support to view and download user ’s guides, “how-to” and troubleshooting ar ticles, software and more. T raining Vis it www .smarttech.com/trainingcenter for training materials and information a bout our training services.
48 Customer Support 99-00881-20 A0.
99-00881-20 Index 49 Index A Adjusting Advanced image adjustment options 26 Default settings 27 Auto input search 27 Beep 27 Blackboard mode 27 Fan mode 28 Keystone 27 Lamp power 28 No signal power of.
50 Index 99-00881-20 A0 K Keystone Definition 8 L Lamp cover 38 Lamp replacement 32 M Master power switch 23, 24 Menu 25 Mirror cleaning 31 N Notebook software 19 P Position adjustment options 26 Powe.
.
SMART T echnologies 1207 – 11 Avenue SW , Suite 300 Calgary , AB T3C 0M5 CANADA www .smarttech.com/support www .smarttech.com/contactsupport Support +1.
Een belangrijk punt na aankoop van elk apparaat Smart Technologies 45 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Smart Technologies 45 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Smart Technologies 45 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Smart Technologies 45 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Smart Technologies 45 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Smart Technologies 45 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Smart Technologies 45 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Smart Technologies 45 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
