Gebruiksaanwijzing /service van het product Aspire R3610 van de fabrikant Acer
Ga naar pagina of 71
Acer A s p i r e R 3 6 1 0 Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.
ii Revision History Please refer to the table below for the updates ma de on this service guide. Date Chapter Up dates.
iii Copyright Copyright © 2008 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into a n.
iv Disclaimer The information in this guide is subject to ch ange without notice. Acer Incorporated makes no representations or warranties, either e xpressed or implied, w ith respect to the contents hereof and specifically disclaims any warrantie s of merchantability or fitness for any particular purpose.
v Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appear on screen. NOTE Gives additional informa ti on rela ted to the current topic. W ARNING Alerts you to any physical risk or system damage that might result from doing or not doing specific actions.
vi Service Guide Coverage This Service Guide provides you with all technica l information relating to the BASIC CONFIGURA TION decided for Acer's "glo bal" product offering.
vii System Tour 1 Features 1 M/B Placement 4 Block Diagram 5 System Compon ents 6 Front Panel 6 Rear Panel 7 Power Management Function( ACPI support function) 8 Device Standby Mode 8 Global Standby Mo.
Chapter 1 1 Features Below is a brief summary of the computer ’s many feature: NOTE: The features listed in this section i s for your re ference only .
2 Chapter 1 • One D-sub port and One HDMI (T ype-A) po rt • Dual View function support • Meet Microsoft Vist a Premium graphic requirement Hard disk • Support up to one SA T A ports • 2.
Chapter 1 3 • One DC-in jack in real I/O • One e-SA T A port in front bezel • One HD headphone output in front bezel • One MIC-IN in front be zel • T ow USB in fron t bezel • One card read.
4 Chapter 1 M/B Placement No Label Description No Label Description 1 CLR_CMOS Clear CMOS header and jumper 13 ESA T A External SA T A 2 Rear_USB2 Rear USB ports 14 MIC IN Audio mic-in connector 3 Rea.
Chapter 1 5 Block Diagram.
6 Chapter 1 System Components This section is a virtual tour of th e sy stem’s interior and exterior components. Front Panel No. Component 1 e-SA T A port 2 Microphone-in jack 3 Headphone/S peaker-out/line-out jack 4 Media card reader (4 in 1: XD/SD/MMC/MS) 5S P D I F 6 Acer Logo 7 USB 2.
Chapter 1 7 Rear Panel No. Component 1 4 X USB 2.0 port 2 LAN Co nnector 3 HDMI Connector 4 D-sub Connecto r 5 DC-in Jack.
8 Chapter 1 Power Management Function(ACPI support function) Device Standby Mode • Independent power ma nagement timer for hard disk drive devices(0-15 minu tes,time step=1mi nute). • Hard Disk drive goes into S tandby mode(for A T A standard interface).
Chapter 2 9 CMOS Setup Utility CMOS setup is a hardware configurat ion program built into the system ROM, called the complementary meta l- oxide semiconductor (CMOS) Setup Utility . Since mo st systems are already properly configured and optimized, there is no need to run this util ity .
10 Chapter 2 Entering CMOS setup 1. T urn on the server and the monitor . If the server i s already turned o n, close all ope n app lications, then restart the server . 2. During POST , press Delete . If you fail to press Delete before POST is completed, you will need to re start the serve r .
Chapter 2 11 Setup Utility Menus The Setup Main menu includes the following main setup categories. In the descrip ti ve t able foll owi n g ea ch of th e me nu s cre en sh ot s, settings in boldface are the default and suggested settings.
12 Chapter 2 Product Information The Product Information menu disp lays basic information about the syst em. These entries are for your reference only and are not user-configurable. Parameter Description Processor T y pe Ty pe of CPU installed on the system.
Chapter 2 13 Standard CMOS Features Parameter Description Option System Date Set the date following the weekday-month-day-year format. System T ime Set the system time following the hour-minute-secon d format. AHCI Port 0/1 Press Enter to view detailed device information.
14 Chapter 2 Advanced BIOS Feature Parameter Description Option Quick Boot Allows you to decrease the time it takes to boot the computer by shortening or skipping certain st andard booting process. Enabled Disabled Quiet Boot When enabled, the BIOS splash screen displays during startup.
Chapter 2 15 Advanced Chipset Features Parameter Description Option Intel XD Bit When enabled, the processor disables code execution when a worm attempts to insert a code in the buffer preventing damage and wo rm propagation. When disabled, the processor forces t he Execute Disable (XD) Bit feature flag to always return to 0.
16 Chapter 2 Integrated Peripherals Parameter Description Option Onboard SA T A Controller Enables or disabl es the onboard SA T A controller. Enabled Disabled Onboard SA T A Mode Select an operating mode for the onboard SA T A. RAID Native IDE Onboard USB Controller Enables or di sables the onboard USB controller .
Chapter 2 17 Power Management Setup Parameter Description Option ACPI Suspend Mode Select an ACPI state. S3 (STR) S1 (POS) Deep Power off Mode Enables or disables the Deep power off mode Enabled Disab.
18 Chapter 2 PC Health Status Parameter Description Option CPU Shutdown T emperature Enables or disables the system shutdown when the system is over hot.
Chapter 2 19 Frequency/Voltage Control Parameter Description Option S pread S pectrum Enables or disables the reduction of the mainboard’s EMI. Note: Remember to disable the Spread S pectrum feature if you are overclocking. A slight jitter can introduce a temporary boost in clock speed causing the overclock ed processor to lock up.
20 Chapter 2 BIOS Security Features Setting a supervisor pass word 1. Use the up/down arrow keys to select Chan ge Supervisor Pa sswor d menu then press Enter . A password box will appear . 2. T ype a password then press Enter . The password may consist up to six al phanumeric characters (A-Z, a-z, 0-9) 3.
Chapter 2 21 Load Default Settings The Load Default Settings menu allows you to lo ad the defau lt settings for all BIOS setup parameters. Setup defaults are quite demanding in terms of resources cons umption.
22 Chapter 2 Save & Exit Setup The Save & Exit Setup menu all ows you to save changes made and close the Setup Utility ..
Chapter 2 23 Exit Without Saving The Exit Without Saving menu allows you to discard changes made and close the Setup Utility ..
Chapter 3 24 This chapter contains step-by-step procedure s on how to disassem ble the desktop computer for ma intenance and troubleshooting. Disassembly Requirements T o disassembl e the computer , y.
25 Chapter 3 Pre-disassembly Procedure Before proceeding with the disassembly proce dure, perform the steps listed below: 1. T urn off the system and all the peripherals connected to it. 2. Unplug the power cord from the power ou tl ets. 3. Unplug the power cord from the system.
Chapter 3 26 Removing the Side Panel 1. Put the Computer on the worktable lightly . 2. Release side cover with 1 screws then remove side cover ..
27 Chapter 3 Removing Front D/B 1. Use hand to loosen both sides the clasp. 2. Lift the D/B away from the main board..
Chapter 3 28 Removing CPU fan W ARNING: The heat sin k becomes very hot when the system is on. NEVER touch the heat sink with any metal or with your hands. 1. Use screwdriver to loosen the three screws and disconnect fan cable. 2. Remove CPU fan from CPU cooler .
29 Chapter 3 Removing CPU Cooler W ARNING: The heat sin k becomes very hot when the system is on. NEVER touch the heat sink with any metal or with your hands. 1. Use screwdriver to loosen the four screws.Remove CPU fan from CPU cooler . 2. Remove CPU cooler .
Chapter 3 30 Removing wireless LAN 1. Remove wireless LAN antenna cable a. Disconnect aux_ antenna cable (gray) from"AUX" connector of wireless LAN? b. Disconnect main_ antenna cable (black) from"MAIN" connecto r . 2. Remove wireless LAN.
31 Chapter 3 Removing M/B 1. Remove the four screws that secure the main board to the chassis. 2. Lift the board from the chassis..
Chapter 3 32 Removing the Hard Disk Drive 1. Use screwd river to lo osen the four screws. 2. Remove HDD from Main boa rd..
33 Chapter 3 Removing Memory . 1. Remove Memory from SODIMM. 2. Remove the second Memory from SODIMM2 (Optional by SKU)..
Chapter 4 34 This chapter provides instructions on how to troubleshoot system hardw are probl ems. Hardware Diagnostic Procedure Please refer to generic troubleshooting guide for trouble shooting info.
35 Chapter 4 Post Checkpoints List: The list may vary accordingly depending on yo ur BIOS Checkpoint Description CFh T est CMOS R/W functionality C0h Early chipset initialization: -Disable shadow RAM -Disable L2 cache (socket 7 or below) -Program basic chipset registers C1h Detect memory -Auto-detection of DRAM size, type and ECC.
Chapter 4 36 14h Program chipset default values into chipse t. Chipset default values are MODBINable by OEM customers. 15h Reserved 16h Initial Early_Init_ Onb oard_ Generator switch.
37 Chapter 4 4Ch Reserved 4Dh Reserved 4Eh 1. Program MTRR of M1 CPU. 2. Initialize L2 cache for P6 class CPU & pr ogram CPU with proper cacheable range. 3. Initialize the APIC for P6 class CPU. 4. On MP platform, adjust the cacheable range to smaller one in case the cacheable ranges between each CPU are n ot identical.
Chapter 4 38 69h T urn on L2 cache 6Ah Reserved 6Bh Program chipset registers acco rding to items described in Setup& Auto configuration table. 6Ch Reserved 6Dh 1. Assign resources to all ISA PnP devices. 2. Auto assign ports to onboard COM ports if the corresponding item in Setup is set to “AUTO” 6Eh Reserved 6Fh 1.
39 Chapter 4 85h 1. USB fi nal Initialization 2. NET PC: Build SYSID structure 3. Switch screen ba ck to text mode. 4. Set up ACPI table at top of memory .
Chapter 4 40 POST Error Messages List If you cannot run the diagnostics program tests but did receive a POST error message, use "POST Error Messages List" to diagno se system problems.
41 Chapter 4 Hard disk(s) diagnosis fail The system may run specific disk diagnostic routines. This message appears if one or more hard disks return an error when the diagnostics run. Keyboard Error Or No Keyboard Present Can not initialize the keyboard.
Chapter 4 42 Error Symptoms List NOTE: T o diagnose a problem, first find the error symptom in the left column. If directed to a check procedure , replace the FRU indicated in the check pro cedure. If no check procedure is indi cated, the first Action/ FRU listed in right column is the most likely cause.
43 Chapter 4 Diskette drive does not work. 1.Ensure the di skette drive is not set to None in the Disk Drives of BIOS Setup. 2.Diskette drive power 3.Diskette drive connection/cable 4.Diskette drive 5.Main board Diskette drive read/write error . 1.Diskette.
Chapter 4 44 CD/DVD-ROM drive LED doesn't come on but works normally . 1.CD/DVD-ROM drive CD/DVD-ROM drive LED flashes for more than 30 seconds before LED shutting off. Software asks to reinstal l disc.Sof tware displays a reading CD/DVD error . 1.
45 Chapter 4 Video memory test failed.Video adapter failed. 1.Remove all non-factory-installed cards. 2.Load default settings (if screen is readable). 3.Main board Display problem: -Incorrect colors No high intensity Missing, broken, or incorrect characters Blank monitor (da rk) Blank monitor (bright) Distorted image Unreadable monitor 1.
Chapter 4 46 Executing software shutdown from Windows98 S t art menu does not turn off the system. (Only pressing power switch can tu rn off the system). 1.Load default settings. 2.Reload software from Recovery CD. No system power , or power supply fan is not running.
47 Chapter 4 Undetermined Problems If an error message is present, go to "POST Error Me ssages List" on page 85. If you did not receive any messages, if the symptom is listed in "or "Error Symptoms List" on page 87. If you still cannot solve the problem, continue with this check: 1.
Chapter 5 48 Jumper Setting The section explains how to set jumper fo r correct configuration of the mainboard. Setting Jumper Use the motherboard jumpers to set system config uration options. Jump ers with more Than one pin are numbered. When setting the jumpers, ensure th at the jumper ca ps are Placed on the correct pins.
49 Chapter 5 2. USB CONNECTORS (S tacked)(Black) a. REAR_USB1, REAR_USB2 FP1 Front panel header 1: GND 2: F_USBPWR 3: USB_P5+ 4: USB_P5- 5: GND 6: F_USBPWR* 7: USB_P4+ 8: USB_P4- 9: FP_9(PU 5V_S0) 10:.
Chapter 5 50 b. LAN1 NOTE: Pins 1-12 for RJ-4 5 LAN Ja ck pin de fi n i ti on , 1 3-1 6 for LAN LE D definitio n 3. Audio Back Panel Connectors (V ertical) a.
51 Chapter 5 c. DCIN d. VGA(D-SUB).
Chapter 5 52 e. HDMI f. eSA T A CONN.
53 Chapter 5 g. SA T A CONN.
Chapter 5 54 h. Card reader P in Sig n a l Na m e Pi n Sign a l N a me SD - 1 SD _ D AT3 MS- 1 0 G N D SD - 2 SD_CMD G 1 G N D SD - 3 G N D G 2 G N D SD - 4 C AR D _ 3 V3 XD - 1 G ND SD - 5 SD _ C L K.
55 Chapter 5 i. Sp i d i f.
Chapter 6 56 This chapter offers the FRU (Field Replaceable Unit) lis t in glob al config uration of the Aspire R3610 desktop computer . Refer to this chapter w hen ever orderin g the parts to rep air or for RMA (Return Merchandise Authorization).
57 Chapter 6 Aspire R3610 Exploded Diagram NOTE: This section will be update d when more information becomes availab le. NO P ART NO QTY NO PA R T N O QTY 1 Bot-cover 1 8 01-Main-base 1 2 Cover-pannel.
Chapter 6 58 Aspire R3610 FRU List Category Description Part Number MB Mainboard R3610 nVidia Proprietary LF MCP7A- ION,W/ eSA T A, W/ HDMI,S/PDIF ,Atom330 MB.SCX09.001 Cooler w/i 7012 blower (for Atom 230) HI.10800.038 Hornet a/p/g N330 FXN PKP710G w/i sunon fan HI.
59 Chapter 6 HGST 2.5" 5400rpm 160GB HTS543216L9A300 Falcon-B SA T A LF F /W:C40C KH.16007.019 SEAGA TE 2.5" 5400rpm 160GB ST9160310AS Crockett SA T A LF F/W:0303 KH.16001.034 WD 2.5" 5400rpm 160GB WD1600 BEVT -22Z CTO ML160 SA T A LF F/W:1 1 .
Chapter 6 60 Chicony Mouse RF2.4 MGR0919 with Receive r MS.1 1200.0 52 USB Optical Mouse mouse USB M-U0005 MS.1 1200.047 S peake r Neosonica mini speaker USB White SP .10600.028 webcam webcam+stand PC.13400.035 air mouse + controller(game pad) Cywee 3D stick mouse Mouse Z MS.
61 Chapter 6 Receiver w/o IR Blaster RV .1 1000 .007 Receiver w/ IR Bl aster RV .1 1000 .014 USB Keyboard Keyboard CHICONY KU-0 906 USB 104KS White US KB.USB03.154 Keyboard CHICONY KU-0 906 USB 104KS White T raditional Chinese KB.USB03.155 Keyboard CHICONY KU-0 906 USB 104KS White Simplified Chinese KB.
Chapter 6 62 Keyboard CHICONY KU-0 906 USB 105KS White Dutch KB.USB03.170 Keyboard CHICONY KU-0 906 USB 105KS White Swiss/G KB.USB03.171 Keyboard CHICONY KU-0 906 USB 105KS White Belgium KB.USB03.172 Keyboard CHICONY KU-0 906 USB 105KS White Icelandic KB.
63 Chapter 6 Keyboard CHICONY KU-0 906 USB 105KS White Nordic KB.USB03.191 Wireless KB Keyboard CHICONY KG-0917 RF2.4 104KS White US KB.RF403.097 Keyboard CHICONY KG-0917 RF2.4 104KS White Traditional Chinese KB.RF403.098 Keyboard CHICONY KG-0917 RF2.
Chapter 6 64 Keyboard CHICONY KG-0917 RF2.4 105KS White Norwegian KB.RF403.1 17 Keyboard CHICONY KG-0917 RF2.4 104KS White Hebrew KB.RF403.1 18 Keyboard CHICONY KG-0917 RF2.4 105KS White Polish KB.RF403.1 19 Keyboard CHICONY KG-0917 RF2.4 105KS White Slovenian KB.
Een belangrijk punt na aankoop van elk apparaat Acer Aspire R3610 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Acer Aspire R3610 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Acer Aspire R3610 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Acer Aspire R3610 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Acer Aspire R3610 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Acer Aspire R3610 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Acer Aspire R3610 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Acer Aspire R3610 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
