Gebruiksaanwijzing /service van het product CS15-5 van de fabrikant Smeg
Ga naar pagina of 20
Contents 3 1 INSTRUCTIONS SAFETY AND US E _ _______________________________ _ ________ 4 2 INSTALLING THE APPLIANCE ______________________________________________6 3 ADAPTATION TO DIFFERENT GAS TYPES .
Introduction 4 1 INSTRUCTIONS SAFETY AND USE THIS GUIDE IS AN INTEGRAL PART OF THE AP PLIANCE. IT SHOULD BE KEPT IN A SAFE PLACE WITHIN EASY REAC H THROUGHOUT THE LI FE CYCLE OF THE COOKING RANGE. WE RECOMMEND THAT YOU READ THIS GUID E CAREFULLY TOGETHER WITH ALL THE INSTRUCTIONS GIVEN BEFORE USING THE COOKING RANGE.
Introduction 5 WHEN LOWERING THE GLASS COVER ONTO TH E HOB, KEEP HOLD OF IT WITH YOUR HAND (THE COVER IS ONLY AVAILABL E WITH CERTAIN MODELS). ATTENTION: THE GLASS COVER MAY BREAK IF IT IS OVERHEATED. TURN OFF ALL BURNERS AND WAIT UNTIL THEY C OOL DOWN BEFORE CL OSING IT.
Installer Instructions 6 2 INSTALLING THE APPLIANCE The appliance must be installed by a qualified tec hnician and in accorda nce with the regulation s in force. It can be installed against walls where one of them i s higher th an the hob as illustrated in fi gures A and B in relation to the installation classes.
Installer Instructions 7 2.2 Room ventilation The appliance may only be installed in constantly ve ntilated rooms, in accordance with the regulations in force. The room where the appliance is installed must provide sufficient air for frequent gas combustion and the renewal of the air in the room.
Installer Instructions 8 2.4.2 Butane/propane gas connection For butane, use a pressure regulator on the gas cylinder in accordance with the regulations in force and a flexibl e hose in accordance with Standa rd XPD36-110.
Installer Instructions 9 2.4.6 Connection using a collapsible st eel pipe (for all gas types) This connection type can be used for both of the installation methods shown in figures " A " and " B " in chapter “2. INSTALLING THE APPLIANCE”.
Installer Instructions 10 3.2 Tables of burner and in jector characteristics Burner Rated thermal power (kW) BUTANE/PROPANE GAS – G30/G31 28/37 mbar Injector diameter 1/100 mm By-pass mm 1/100 Reduced power (W) Power g/h G30 Power g/h G31 Auxiliary 1 50 30 350 73 71 Medium-speed 1.
Installer Instructions 11 4 FINAL PROCEDURES Having replaced the injectors, re mount the flame spreaders an d caps of the burners and the racks. Once you have adjusted the ap pliance for use with a different gas from the factory-set one, replac e the gas setting label on the appliance with the on e co rrespondi ng to the new gas.
User Instructions 12 5 DESCRIPTION OF CONTROLS ON THE FRONT PANEL All controls are located on the front panel . The table below de scribes the symbols used.
User Instructions 13 6 USING THE HOB 6.1 Lighting the hob burners Before lighting the hob burners, ens ure that the flame sprea ders are in their hous ings with their caps, and check that the gaps A in the flame spreade rs correspond with the lighters and thermocouples.
User Instructions 14 7 USING THE OVEN Before using the oven in models with an electronic programm er, make sure that the symbol appears on the display.
User Instructions 15 7.3.3 Using the rotisserie in cooking ranges with a larg e oven Insert the support framework on th e second guide up from the bottom in such a way that the spit housing is outsi de the oven.
User Instructions 16 Using the grill Once it is lit and this is confirmed by the red li ght coming on, leave the oven to heat up fo r 5 minutes before putting in food. Food must be seasoned before cooking . Oil and melted butte r must also be applied before cooking.
User Instructions 17 7.4 Using the gas grill (only on certain models) 7.4.1 Manual lighting of the gas grill burner Having opened the oven door, press in the knob a nd turn it clockwise to the grill setting , and bring the lit lighter into the vicinity of the burner located inside the oven.
User Instructions 18 8 ELECTRONIC PROGRAMMER (ONLY FOR MODELS WHICH ARE EQUIPPED WITH ONE) LIST OF FUNCTIONS TIMER BUTTON COOKING TIME BUTTON END OF COOKING BUTTON VALUE DECREASE BUTTON VALUE INCREASE BUTTON 8.1 Time setting When using the oven for the first time or after a power outage, the di splay time will blink intermittently, showing .
User Instructions 19 Once programming is co mplete, in order to see the re maining cooking time, press the button; to see the cooking end tim e, press the button.
User Instructions 20 9 CLEANING AND MAINTENANCE DO NOT USE A STEAM JET TO CLEA N THE APPLIANCE. 9.1 Cleaning stainless steel In order to preserve stainless steel properly, it must be regularly cleaned at the end of every use of the cooking range, after it has been left to cool.
User Instructions 21 9.2.4 Lighters and thermocouples In order to ensure that they function prop erly (for models equipped with them), the lighters and thermocoupl es must alwa ys be thoroughl y clean. Check them frequently and clean them with a damp cloth if necessary.
User Instructions 22 10 EXTRAORDINARY MAINTENANCE The oven periodicall y requires minor maintena nce or replacement of weari ng parts su ch as seals, bulbs, etc. See below for specific instructions on how to carry out this type of maintenance. Before carrying out any such procedure, you mu st disconnect the elec tricity supply to the appliance.
Een belangrijk punt na aankoop van elk apparaat Smeg CS15-5 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Smeg CS15-5 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Smeg CS15-5 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Smeg CS15-5 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Smeg CS15-5 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Smeg CS15-5 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Smeg CS15-5 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Smeg CS15-5 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
