Gebruiksaanwijzing /service van het product SNZ414IS van de fabrikant Smeg
Ga naar pagina of 32
INSTRUCTION MANUA L DISHWASHER.
Contents Thank you for choosing this product. We advise y ou to carefu lly read all th e instructions contai ned in this manual, in order to un derstand how t o operate your di shwasher sa fely and correctly.
Safety instructions 1. Safety and operating instructions THIS M ANUAL FO RMS AN INTEGRAL PART OF THE APPLIAN CE: IT MUS T AL W AYS BE KE PT INTACT TOGETH ER WITH THE DISH WASHER. BEFORE USING THE APPL IANCE, C AREFULLY READ ALL THE IN STRUCTIO NS CONTAINED I N THIS MANUAL.
Safety instructions OBSOLETE APPLIANCES MUST BE RENDERE D UNUSABLE. CUT OFF THE MAINS POWER CORD AFTER UNPLUGGING IT FROM THE WALL OUTLET, AND MAK E SAFE AN Y COMPONEN TS W HICH M IGHT BE D ANGEROUS FOR CHILDREN (LOCKS, DOORS, ETC.
Safety instructions LEANING OR SITTING ON THE DISH W A SHER DOOR W HEN OPEN MAY CA USE THE A PPLIA NCE TO O VERTUR N, PUT ING PEO PLE A T RISK. DO NOT DRINK THE W ATER RE SIDUES WHI CH MAY B E PRESENT INSIDE THE DIS HES OR DIS HWASHE R AT THE END OF THE W ASHI NG PRO GRAM AND BEF ORE THE DRYING CYCLE.
Installation instructions 2. Installation and hook-up Remove the pol yst yrene bas ket r etainer s. Posit ion the appl iance i n the des ired pl ace of inst allat ion. The back or s ides of the dishwas her may be placed up against walls or other furnit ure unit s.
Installation instructions CONNECTING TO THE WATER SUPPLY Connect th e intake hose t o a cold w ater supply w ith ¾” gas threa d, inserting the filter A supp lied with the dishwash er. Ta ke care to screw the hose firmly into place with y our hands and then c omplete by tightening about ¼ of a turn with pliers.
Installation instructions 2.2 Electrical connection and precautions CHECK TH AT THE VOLT AGE AN D THE FR EQUENCY OF THE MAIN S MATCH THE R ATINGS ON THE N AME PLAT E OF TH E APPLIAN CE POSITION ED ON THE INNER EDGE OF THE DOOR.
3. Description of the controls 3.1 Front panel All the dishw asher control s are grouped on the front pane l. 10 1 ON/OFF BUTTON 2 SELECTION PROGRAMS BUTTONS (P1.
Only run the soak program with half loads. (*) Reference program as AS/NZS 2007 . (1) Average power consumption with the soft ener set on level 2 . (2) The cycle duration and power consumption may vary acc ording to the water and room temperatures, and the type and amount of dishes.
TABLE FOR CERTIFICATION BODIES Reference standard AS/NZS 2007 Reference pr ogram (*) NORMAL ECO Load 10 place- settings Type of deterg ent in accor dance with AS/NZS 2 007 Amount of deter gent pour 5g.
Before starting a washing pro gram make sure that: • The water su pply tap is op en. • The correct amount of detergent has been added to the dispenser . • The baskets have been cor rectly loaded. • The spray arm s are able to rotate freely and without obstruct ion.
PROGRAMMING In this mode l of dishw asher, all progr amming proce dures can only be carried ou t with the door closed. As lo ng as the door i s open, the PROGRAMS lights ( 6 ) and PHASES/PROGRAM lights ( 8 ) will re main off. SELECTION PROGRAM The progra m selection i s possible through the rel ative buttons (2) .
END PROGRAM When the pr ogram fini shes, a buzzer so unds briefly and a ll the PHASES/PROGRAM lights ( 8 ) flash. Press any of t he SELECTION PROGRAMS buttons (2) , stops t he light flashins, a nd the dishw asher is now ready to perform a new cycle; opening and shutting the door or sw itching the applia nce off and on has the same eff ect.
ANNULLING A PROGR AM To annul the pr ogram in pro gress, it must first be interrup ted (see “ I NTERRUPTION OF A PROGRAM ”). Now press bu ttons P1 + P2 simultaneou sly and the first th ree program lig hts will co me on.
To set the delay once the progr am has started , pr oceed as f ollows. If the pr ogram y ou wish to carry out is the same as th e one already in progress: • press the START/PAUSE button (4) for a fe.
User instructions TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT • Always try to run the dishwa sher fully load ed . • Do not wash t he dishes in r unning wat er. • Use the was hing program that is most appropriate f or each type of load. • Do not carry out any prelim inary rinsing.
4. Operating instructions Once the di shwasher ha s been correctly insta lled, prepare for use as follows: • Add the rinse a id and deter gent. 4.1 Using th e rinse aid and de t ergent dispen sers T.
ADJUSTING THE RINSE AID DISPENSER SETTING The dishw asher is factory set for medium w ater hardne ss. However it possible to change the set ting by turning the di spenser’s select or to the desired p osition: the a mount of rinse aid disp ensed is proportio nal to the selector position.
• The market off ers liquid and powder dete rgents with differ ing chemical compositions , which may co ntain phosphat es , or be phosphate-free but contai n natural enzymes . - Detergents containing phos phates are more ef fective agains t grease and st arch at temper atures above 60°C .
4.2 General warnings and recommendations Before usi ng the d ishwasher for the f irst time, it i s advisable to read the following r ecommendatio ns concern ing dish types to be washed and their loa ding .
Items which are not dishwasher-safe: • Wooden dishe s, pots or p ans: these may be damaged by the high wash ing temperatures . • Handcrafted items: these are r arely suitable for washing in a dishwash er. The relati vely high w ater temperatures and the detergents us ed may damag e them.
4.3 Using th e baskets The dishw asher has a capac ity of 10 place-settings , in cluding serving dishes. LOWER BASKET The low er basket receiv es the full fo rce of the low er spray arm, an d should theref ore be used f or the “toughest” items with a heavier degree of soiling.
CUTLERY BASKET The cutler y should be arr anged in an orderly manner inside the bas ket, with the ha ndles pointing downw ards. Take care during loadin g to avoid injury from t he knife blade s. The basket is suitabl e for all types of cutlery, except those long e nough to int erfere with the upper spray arm.
LOADING THE UPPER BASKET Load plates f acing forw ard; cups, bowls etc. must alw ays be facing downw ards. The left-hand side of the bas ket can be loa ded with two layers of cu ps and gla sses. On the r ight plate s and saucers can be slotted verti calli into the forks.
5. Cleaning and maintenance Before carrying out any w ork, always disconne ct the appliance from the electrical pow er supply. 5 .1 General war nings and recom mendations Avoid the use of aci dic or abrasive detergent s.
CLEANING THE SPRAY ARM, TRAVELLING VERSION To remove the TRAVELLING spray arm , take hold of it and raise it to release both t he spray ar m and the pipe fr om the tank , then detach th e spray arm fro m the pipe.
GENERAL WARNINGS AND RECOMMEND ATIONS FOR CORRECT MAINTENANCE: • The filter s should be c leaned under running water usi ng a stiff brush. • It is essent ial to thoroughl y clean the filters ac cording to t he above instru ctions: the dishw asher cannot functio n if the filters are clogged.
If the dishes are not being cleaned properly, check that: • the correct am ount of deter gent has been a dded; • there is r egenerating salt inside th e special con tainer; • the dishes are bein.
6 . T roubleshooting In case of a ma lfunction, t he dishwash er will ident ify the progra m by switchin g on a combina tion of ligh ts. When an alrm is present, all the PROGRAM lights ( 4 ) come on, .
User instructions TECHNIC AL DATA Width 447 ÷ 449 mm Depth measur ed flush wit h the outer edge of the contr ol panel Free st anding: 60 0 mm Semi-int egrated: 570 mm Height Free s tanding fr om 850 mm to 870 mm Semi-int egrated f rom 820 mm to 87 0 mm Capacit y 10 Standar d place s ett ings Water suppl y pressure min.
3/4” 3/4” 1/2” SW32 MIN 40cm Cuø10 123 45 7 8 9 10 11 6 12 1 11 12 13 8 115 125 135 145 155 115 125 135 145 155 Misurarel’altezzadelpannellocomandi;farecoinciderel’indicerelativ oa talevaloreconilprofilosuperiored ellaport a inlegno;tracciar e ilposizionamentodegliagganciporta.
Een belangrijk punt na aankoop van elk apparaat Smeg SNZ414IS (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Smeg SNZ414IS heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Smeg SNZ414IS vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Smeg SNZ414IS leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Smeg SNZ414IS krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Smeg SNZ414IS bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Smeg SNZ414IS kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Smeg SNZ414IS . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
