Gebruiksaanwijzing /service van het product SSA91MFA van de fabrikant Smeg
Ga naar pagina of 24
Contents 1. INSTRUCTIONS FOR SAF E AND PROPER USE _______________________________4 2. INSTALLATION OF THE APPLIANCE_________________________________________6 3. ADAPTATION TO DIFFERENT TYPES OF GAS ________________________________9 4. FINAL OPERATIONS _____________________________________________________12 5.
Introduction 1. INSTR UCTIONS FOR SA FE AND PR OPER USE THIS MANUAL IS AN INTEGRAL PART OF TH E APPLIANCE AND THEREFOR E MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PL ACE FOR THE WHOLE WORKING LIFE OF THE COOKER. WE ADVISE READING THIS MANU AL AND AL L THE IN STRUCTIONS THEREIN BEFORE USING THE COOKER.
Introduction DO NOT PUT PANS WITHOUT PERFECTLY SMOOTH AND FLAT BOTTOMS ON THE HOB GRIDS. DURING USE THE APPLIANCE BE COMES VERY HOT . TAKE CARE NOT TO TOUCH THE HEATING ELEMENTS INSIDE THE OVEN. DO NOT USE CONTAINERS OR BROI LERS THAT EXTEND BEYOND THE OUTE R PERIMETER OF THE HOB.
Instructions for the installer 2. INST ALLA TION OF THE APPLIANCE It is the law that all ga s appliances are installed by competent persons . Corgi gas i nstallers ar e approved to work to safe and satisfactory standards .
Instructions for the installer 2.1 Electrical connection Make sure that the power line voltage matches the specifications indicated on the rating plate located inside the storage compartment.
Instructions for the installer 2.3 Connecting to natural and LPG gas (Please see connection diagram) Make the connection to the appliance using flexible bayonet style hose in accordance to B.S. 669. The hose connection at the rear of the appliance has a ½” BSP internal thread.
Instructions for the installer 3. AD APT A TION T O DIFFERENT TYPES OF GAS Before performing any cleaning or maintenanc e work, disconnect the appliance from the mains.
Instructions for the installer 3.2 Burner and nozzle characteristics tab le (Mod. 90 cm.) Burner Rated heating capacity (kW) LPG – G30/G31 28/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flowrate (W) Flowrate g/h G30 Flowrate g/h G31 Auxiliary 1.
Instructions for the installer 3.4 Burner and nozzle characteristics tab le (Mod. 60 cm.) Bruciatore Portata termica nominale (kW) LPG – G30/G31 28/37 mbar Diametro Ugello 1/100 mm By-pass mm 1/100 Portata ridotta (W) Portata g/h G30 Portata g/h G31 Auxiliary 1.
Instructions for the installer 4. FINAL OPERA TIONS After replacing the nozzles, reposition the fl ame-spreader crowns, the burner caps and the grids. Following adjustment to a gas other than the preset one, replace the gas adjustment label fixed to the appliance with the one corresponding to the new gas.
Instructions for the installer 4.4 W all fixing • Stretch out the chain attached to the cooker horizontally so that the other end touches the wall. • Mark the wall in the position where the hole is to be drilled. • Drill the hole, insert a wall plug and attach the ch ain.
Instructions for the installer 5. DESCRIPTION OF CONTR OLS 5.1 Front contr ol panel All the cooker controls and commands are on the front panel. If the cooker is equipped with an electronic programmer, before using the oven make sure that the symbol ; appears on the display.
Instructions for the user VARIABLE GRILL KNOB This allows to vary heat intensity w hen cooking with the grill. The knob can be set with continuity between “ 0 ” and the st op release position, which corresponds to maximum heat.
Instructions for the installer 6. USE OF THE HOB 6.1 Lighting of the hob b urners Before lighting the hob burners check that the fl ame caps are in the correct position and that their burner caps are in place, making sure that the holes A in the flame caps correspond to the spark plugs and thermocouples.
Instructions for the user 6.3 Diameter of the vessels to be used on each b urner BURNERS 1 Auxiliary 2 Semi rapid 3 Rapid 4 Triple crown Ø min. and max.
Instructions for the installer 7. USE OF THE O VEN For the models with electronic programmer, before using the oven make sure that t he display shows the symbol .
Instructions for the user 7.2.2 Using the rotisserie in cookers with maxi oven Fit the supporting frame onto the se cond runner up from the bottom so that the seat to take the rod projects outside the o ven. Place the rod as shown in the diagram (1) and push the frame into the oven until the end of the rod reaches the hole in the rotisserie motor.
Instructions for the installer 7.3 Using the pIzza functi on (only on some models) This appliance Is equipped with a function spe cially developed for cookin g pizza. This function is identified by the symbol on the oven functions knob. To cook a pizza, proceed as describ ed b elow.
Instructions for the user 8. ELECTR ONIC PROGRAMMER (ONL Y ON EQUIPPED MODELS) LIST OF FUNCTIONS MINUTE-COUNTER KEY COOKING TIME KEY END-OF-COOKING KEY DECREASE TIME KEY INCREASE TIME KEY 8.1 Cloc k adjustment When using the oven for the first time, or after a power failu re, the display flashes regularly and indicates .
Instructions for the installer 8.4 End of cooking When cooking is over, the oven w ill automatically switch off and, at the same time, an intermittent alarm will sound. After swit ching off the alarm, the display will once again sho w the right time together with the symbol , indicating that the oven has returned to manual operation mode.
Instructions for the user 9. A V AILAB LE A CCESSORIES The oven has 4 support for positioning pla tes and racks at various heights. Oven grill: for cooking food on plates, small cakes, roasts or food requiring light grilling. Plate grill: for placing above plate for cooking foods that might drip.
Instructions for the installer 10. CLEANING AND MAINTENANCE 10.1 Cleaning stainless steel and enamelled versions To maintain stainless steel in good condition clean it regularly after each use, on ce it has cooled down.
Instructions for the user 10.3 Cleaning of o ven For best oven upkeep clean regularly after having allowed to cool. Take out all removable parts. • Clean the oven grill with hot water and non-abrasive detergent. Rinse an d dry. • Do not allow residues of sugary foods (such as jam) to set inside the o ven.
Instructions for the installer 11. EXTRA ORDINAR Y MAINTENANCE The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations.
Een belangrijk punt na aankoop van elk apparaat Smeg SSA91MFA (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Smeg SSA91MFA heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Smeg SSA91MFA vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Smeg SSA91MFA leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Smeg SSA91MFA krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Smeg SSA91MFA bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Smeg SSA91MFA kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Smeg SSA91MFA . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
