Gebruiksaanwijzing /service van het product CMD-J26 van de fabrikant Sony
Ga naar pagina of 20
CMD-J6/J26 SERVICE MANUAL E Model ______________________________________________________________________________________________________________ SPECIFICATIONS Signalling format Dual-Band Frequency ra.
2 Power requirements 3.7 V (nominal) Operating temperature -10°C to +55°C Accessories operating temperature ± 0°C to +45 °C Connectors External RF connector Bottom Connector (12-pin flat I/O connector) Mini plug head set jack WAP (CMD-J6 only) Supported protocols by the WAP v.
3 TABLE OF CONTENTS SECTION 1 Specifications (see Cover sheet) SECTION 2 General Descriptions 2.1 Multi Band . 04 2.2 Radio Frequency Power Level .
4 SECTION 2 GENERAL DESCRIPTIONS 2.1 Multi-band : CMD-J6/J26 support E-GSM 900 and DCS 1800 multi-band functionality. For the use in Europe and in other countries worldwide, ETSI has specified GSM standards into two frequency bands. That is the 900-MHz and 1800-MHz band and is usually referred to as GSM900 and GSM1800 (formerly DCS1800).
5 2.2 Radio Frequency Power Levels: Between the DCS 1800 and both GSM Systems are differences regarding the power level. DCS 1800 basically needs lower power levels. If the performance of a MS for GSM system was certified of 2W (Power Class 4), then in the DCS-1800 system it is only 1W (Power Class 1).
6 2.5 Battery Charging There is no charging circuitry in the battery pack. The CMD-J6/J26 has complete charger function internally. The telephone can be charged only with the battery c onnected the phone. This situation can be sub-divided into two situations: the phone is on or off.
7 2.8 Accessory interface The table explains what kind of pins the phone supplies to the different accessories. Pins GND 1 Charge 2 GEN I/O 3 Power OUT 4 RX (IN) 5 TX (OUT) 6 ACC ID 7 RS232 RTS 8 RS23.
8 SECTION 3 OPERATING INSTRUCTIONS 3.1 The Basic Features of the CMD-J6/J26 • Parts and Controls This section provides a brief guide to the operation and facilities available on the CMD-J6/J26. Refer to the Operating Manual for full operational information.
9 • The Centre Key # Press the Centre Key in standby mode to access the WAP mode if WAP settings are configured. (CMD-J6 only) # During a call, press the Centre Key to access the Call Menu.
10 ICON Explanation Network not available Network signal strenght (strong) Battery strength SMS (Envelope Icon) Voicemail Keypad locked Alarm Silent Mode Vibra Alert Single Beep Ringer off Conversation Privacy (ciphering) not supportet 3.3 Icon Glossary 3.
11 SECTION 4 DISASSEMBLY IMPORTANT NOTE : The IMEI n umber is the electronic identification of the hardware, which is stored electronically. There should be no discrepancy between the number on the sticker and the number within the set memory allowed.
12 LCD CABINET LOWER Re-assembly procedure : To re-assemble the unit, apply the reverse order of the above mention disassembly procedure. IMPORTANT: Do not detach the shield case from the main board.
13 4.2 Interface to GSM-Tester Test Set Up for CMD-J6/J26 Level 1 Testing Service Test Connector GSM TESTER This unit acts as a base s tation providing all the necessary GSM signalli ng requirements and provides GSM signal measuring facilities as well.
14 4.3 Jigs & Tools Description Part No Remark DATA TRANSFER CABLE DTC-04 1-757-348-11 Necessary For Software Update HOOK RELEASE JIG 3-043 180 01 For Housing Opening SERVICE TEST CONNEC TOR STC-0.
15 Section 5 PROGRAMMING INSTRUCTIONS 5.1 Requirement • PC (486 type or higher) with Microsoft Windows Operating System • One COM-port free for usage • The Data Transfer Cable (p/n 1-757-348-11) PREPARATION FOR SOFTWARE UPDATE 5.2 Hardware set-up • Copy all the files to the PC (define own directory).
16 • Select file/Settings and check if the settings for the Com Portand Speed are correct. − The FlashLoader automatically detects all available Com ports on the PC. (COM 1 or COM 2) − Baud rates up to 812500bps will be supported, but standard PCs, unless it is correctly customised (i.
17 SECTION 6 DIAGRAMS 6.1 Radio Frequency (RF) Block Diagram 6.1.1 General The radio part of the CMD-J6/J26 handles the air interface according to the GSM specifications. It is the main contributor for the dualband functionality for E-GSM 900 and DCS 1800.
18 FLEX- BOARD RF BLOCK 1 DGND 2 CHG 3 GEN I/ O 4 POWER OUT 5 RX (IN) 6 TX (OUT) 7 ACC ID 8 RTS 9 CTS 10 AUDIO OUT 11 AUDIO I N 12 AGND SIM I / F HFK I / F SIM LEVEL C T R L 3V /5V A/ D CO NV R F I/F .
19 IC 2 IC 2 is the platform of the A/D-D/A converter for the interfacing and processing of baseband I/Q signals and voice signals. It includes: ! the complete set of baseband functions to perform the.
20 SECTION 7 SPARE PARTS AND ACCESSORIES LIST Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Note: • The parts with no reference in the exploded view are not supplied.
Een belangrijk punt na aankoop van elk apparaat Sony CMD-J26 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sony CMD-J26 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sony CMD-J26 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sony CMD-J26 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sony CMD-J26 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sony CMD-J26 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sony CMD-J26 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sony CMD-J26 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
