Gebruiksaanwijzing /service van het product KLV-23HR1 van de fabrikant Sony
Ga naar pagina of 56
© 2003 Sony Corporation 4-095-493- 12 (2) LCD Color TV Operating Instructions Before operating the unit, please r ead this manual thor oughly and retain it for futur e refer ence.
2 W ARNING To Reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient m agnitude to constitute a risk of electric shock to persons.
3 Impor tant Safeguar ds For your protection, please r ead these instructions completely , and keep this manual for future refer ence. Carefully observe and comply with all warnings, cautions and instructions placed on the set or described in the operating instructions or service manual.
4 Antennas Outdoor Antenna Gr ounding If an outdoor antenna is installed, follow the precautions below . An outdoor antenna system should not be located in the vicinity of over head power lines or other electric light or power circuits, or wher e it can come in contact with such power lines or circuits.
5 Important Safety Instruction 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions.
6 Table of Contents Ta b le of Contents Installing and Connecting the TV Unpacking .......................................................... 7 Inserting Batteries into the Remote Control ... 7 Connector Types .........................................
7 Installing and Connecting the TV Installing and Connecting the TV Unpac king When you unpack this unit, make sure it includes the following: Operating Instructions Warranty Card Inser ting Batteries.
8 Installing and Connecting the TV Identifying Fr ont and Rear Connector s TV front panel Rear of TV 1 POWER button (page 20) 2 Headphones jack Connects to your headphones. If your headphones do not match the jack, use a suitable plug adaptor (not supplied).
9 Installing and Connecting the TV 75-ohm coaxial cable (supplied) Rear of TV VHF/UHF Basic Connections (Connecting Cable TV or an Antenna) When connecting an antenna or cables, remove the rear cover of the TV beforehand. Removing the rear cover 1 Slide the rear cover upward by approx.
10 Installing and Connecting the TV Connecting the P ower Cor d Connect the power cord after you have finished all other connections. 1 Connect the power cord to the AC power adaptor’s AC IN connector. 2 Connect the AC power adaptor’s cord to the DC IN connector of the TV.
11 Installing and Connecting the TV Bundling cor ds and cables This TV allows you to bundle the cords and cables inside of the stand. Adjusting the viewing angle of the TV This TV can be adjusted within the angles shown in the diagram below.
12 Installing and Connecting the TV Connecting a VCR and Cab le TV Use this hookup if: •Y ou have Cable TV that does not require a cable box. Disconnect all power sources before making any connections. 1 Connect the CATV cable to the VCR’s IN jack.
13 Installing and Connecting the TV Connecting a Satellite Receiver Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.
14 Installing and Connecting the TV VHF/UHF R-AUDIO-L VIDEO S VIDEO VIDEO 1 IN AUDIO OUT RL DC IN 14.5V R-AUDIO-L VIDEO 3 IN YP B P R VIDEO (yellow) AUDIO-R (red) VMC-810S/820S (not supplied) VCR S VI.
15 Installing and Connecting the TV When using your audio system speakers Set “Speaker” to “Off” in the (Audio) menu. The TV’s sound is not output from the AUDIO OUT jacks when the TV’s speaker is set to on.
16 Installing and Connecting the TV VHF/UHF R-AUDIO-L VIDEO S VIDEO VIDEO 1 IN AUDIO OUT RL DC IN 14.5V R-AUDIO-L VIDEO 3 IN YP B P R Connecting a D VD Play er with Component Video Connector s This is the preferred hookup to use if: •Y our DVD player has component (Y, B-Y, R-Y) jacks.
17 Installing and Connecting the TV Connecting a D VD Pla yer with A/V Connector s Use this hookup if: •Y our DVD player does not have component (Y, P B , P R ) jacks. Tip If your DVD player has component video output connectors, for best picture quality, use the connection described on page 16.
18 Installing and Connecting the TV Connecting a Digital Satellite Receiver Disconnect all power sources before making any connections. 1 Using three separate component video cables, connect the Digital Satellite Receiver’s Y, P B and P R jacks to the Y, P B and P R jacks on the TV.
19 Installing and Connecting the TV Connecting a Digital TV Receiver Disconnect all power sources before making any connections. 1 Using three separate component video cables, connect the Digital TV Set-top box’s Y, P B and P R jacks to the Y, P B and P R jacks on the TV.
20 Installing and Connecting the TV Setting the Channels After you finish connecting your TV, you can run Auto Program to set up your channels. The Auto Program screen appears when you turn your TV on for the first time after installing it. To skip channels, see page 21.
21 Installing and Connecting the TV To lock in a TV channel If you have connected a cable box or satellite receiver to your TV, and do not intend to connect any other audio or video equipment, it is recommended that you lock in a TV channel. Doing so ensures that you do not accidentally switch channels when using your TV.
22 Installing and Connecting the TV 1 Press MENU. 2 Press V / v to select (Setup), then press . 3 Press V / v to select “Language,” then press . 4 Press V / v to select your preferred language, then press .
23 Watching the TV MUTING PO WER VCR/D VD SA T/CABLE VCR/D VD SLEEP JUMP VO L C H ENTER MTS/SAP GUIDE TV/SA T SA T/CABLE WIDE MODE DISPLA Y FUNCTION TV SYSTEM OFF FAV ORITES MENU CODE SET 123 456 78 0.
24 Watching the TV O f f CC1 CC2 T e xt 1 T e xt 2 Te x t 3 T e xt 4 W atching with closed caption You can display Caption Vision if the broadcaster offers this service.
25 Watching the TV Selecting the Effect Mode “SRS WOW”* creates a panoramic stereo audio image by producing deep and rich bass tones and clear treble tones, enabling you to enjoy powerful sounds effects like those in a movie theater.
26 Watching the TV 1 Press MENU. 2 Press V/v to select (Audio), then press . 3 Press V/v to select “Effect,” then press . 4 Press V/v to select “SRS WOW,” then press . 5 Press MENU to exit the menu screen. Notes • You cannot select the Effect mode if the TV's speaker is set to off.
27 Watching the TV Wide Zoom Normal Full Zoom Changing the Wide Screen Mode The Wide Screen Mode lets you watch 4:3 normal broadcasts or other picture sizes such as Letterbox movies in several Wide Screen Modes (16:9 aspect ratio). Tip The “aspect ratio” is the ratio of width to height of the screen.
28 Watching the TV Tip You can also access the Wide Screen Mode settings in the (Screen) menu. For details, see page 29. Changing the Wide Screen Mode using the menu 1 Press MENU. 2 Press V/v to select (Screen), then press . 3 Press V/v to select the option you want to set, then press .
29 Watching the TV Tip To change from one Wide Screen Mode to another, use the WIDE MODE button on the remote control. Notes • The 4:3 Default functions only when the TV receives 480i or 480p signals. • If “4:3 Default” is set to anything but “Off,” the Wide Screen Mode setting changes only for the current channel.
30 Watching the TV Setting the Video Inputs You can enjoy images (and sound) from optional video equipment connected to this unit by selecting the appropriate input. For details on connection, see pages 9 through 19. 1 1 Press TV/VIDEO repeatedly until the desired video input appears.
31 Watching the TV Operating Video Equipment with Y our TV Remote Contr ol Pr ogramming the remote contr ol MUTING POWER VCR/DVD SA T/CABLE VCR/DVD SLEEP JUMP VOL CH ENTER MTS/SAP GUIDE TV/SA T SA T/C.
32 Watching the TV Manufacturer Code Pentax 305, 304 Philco 308, 309 Philips 308, 309, 310 Pioneer 308 Quasar 308, 309, 306 RCA/PROSCAN 304, 305, 308, 309, 311, 312, 313, 310, 329 Realistic 309, 330, .
33 Watching the TV MUTING POWER VCR/DVD SA T/CABLE VCR/DVD SLEEP JUMP VOL CH ENTER MTS/SAP GUIDE TV/SA T SA T/CABLE WIDE MODE DISPLA Y FUNCTION TV SYSTEM OFF FA VORITES MENU CODE SET 123 456 78 0 9 TV.
34 Watching the TV Using F a v orite Channels You can select programs from a list of favorite channels that you preset. Setting y our fav orite channels MUTING POWER VCR/DVD SAT/CABLE VCR/DVD SLEEP JU.
35 Watching the TV W atching fa v orite channels MUTING POWER VCR/DVD SA T/CABLE VCR/DVD SLEEP JUMP VOL CH ENTER MTS/SAP GUIDE TV/SA T SA T/CABLE WIDE MODE DISPLA Y FUNCTION TV SYSTEM OFF FA VORITES M.
36 Using Advanced Features Using Ad v anced Features To adjust the setting Maximize the setting value Changing the menu color You can choose the menu color from two types by selecting “Menu Color” in the (Setup) menu, then selecting “White” or “Black.
37 Using Advanced Features 1 Receive the picture you want to adjust, then press MENU. 2 Press V/v to select (Screen), then press . 3 Press V/v to select “Vertical Center,” then press . 4 Press V/v/B/b to adjust the position, then press . 5 Press MENU to exit the menu screen.
38 Using Advanced Features 1 Press MENU. 2 Press V/v to select (Video), then press . 3 Press V/v to select “Mode,” then press . 4 Press V/v to select the Picture Mode you want to adjust, then press . 5 Press V/v to select “Picture,” then press .
39 Using Advanced Features 6 Press V/v/B/b to make the desired adjustment, then press . Adjustable options Option Picture Brightness Color* Hue* Sharpness* Backlight * You cannot select these options when the TV receives signals other than 480i. Tip You can adjust each option by referring to the value beside each option indicator.
40 Using Advanced Features 5 Repeat steps 3 and 4 to adjust other options. 6 Press MENU to exit the menu screen. To reset to the factory settings Select “Reset” in step 3, then select “OK” and press . Press V/b To increase higher- pitched sounds.
41 Using Advanced Features Selecting Stereo or Bilingual Pr ograms You can enjoy stereo, bilingual and mono programs. JUMP VOL CH ENTER MTS/SAP GUIDE TV/SAT FAVORITES MENU CODE SET 78 0 9 POWER SAVING MTS/SAP MTS/SAP GUIDE Mono Auto SAP Stereo , Press MTS/SAP repeatedly until the desired sound indication appears.
42 Using Advanced Features Using the P arental Contr ol Feature The TV programs and movies shown on TV are given a rating signal based on the following rating systems.
43 Using Advanced Features 3 Enter a four-digit password using the 0-9 buttons. The Parent menu options appear. If you access the Parent menu for the first time, you are requested to enter the password again for confirmation. Note Do not enter “4357” corresponding to “HELP” on a phone number pad (See page 44).
44 Using Advanced Features To change the password 1 Press MENU. 2 Press V/v to select (Parent), then press . 3 Enter your four-digit password using the 0-9 buttons. The Parent menu options appear. 4 Press V/v to select “Change Password,” then press .
45 Using Advanced Features To select a TV rating in Canada: Press V/v to select “English Rating,” “French Rating,” or “U.S.A. Rating,” then press . 8 Press V/v to select the TV rating to be blocked, then press . 9 Press V/v to select , then press .
46 Using Advanced Features For more details of extenders, see page 48. All of the extenders included in the selected ratings will be blocked. If you want to allow any of them to be viewed, go to step 10. Otherwise, go to step 13. 10 Press B/b to select the extender to be viewed, then press .
47 Using Advanced Features U.S. movie ratings U.S. movie ratings are for movies (including those shown on TV) rated according to the Motion Picture Association of America (MPAA) Guidelines.
48 Using Advanced Features About the extenders of U.S. TV ratings TV-Y7, TV-PG, TV-14 and TV-MA ratings have additional content ratings called “extenders” to define additional viewing limits.
49 Using Advanced Features Canadian English Language ratings The Canadian English Language ratings are for TV programs in English broadcast in Canada. Option C (Programming intended for children under.
50 Using Advanced Features T urning Off the TV A utomaticall y You can set the TV to turn off automatically after a predetermined period of time (15, 30, 45, 60, or 90 minutes).
Additional Information 51 Problem Possible remedies No picture. Cannot receive any channels. Cannot receive upper channels (UHF) when using an antenna. TV is locked to one channel. Cannot receive any channels when using cable TV. Cannot receive or select channels.
Additional Information 52 Some video sources do not appear. Poor picture. Double images or ghosts. Only snow and noise appear on the screen. Dotted lines or stripes. No color. Color is not correct. Dark picture. The picture is too bright. Picture (stripe) noise.
Additional Information 53 Specifications Television system: American TV standard Channel coverage: VHF: 2-13/UHF: 14-69/CATV: 1-125 Antenna: 75 ohm external terminal for VHF/UHF Screen size (measured diagonally): 23 inches Panel System: a-Si TFT Active Matrix LCD panel (Effective dots: more than 99.
Additional Information 54 Inde x F Favorite channels .................................. 34 Front and rear connectors ....................... 8 Full ........................................................ 27 H HD Mode .................................
.
Printed on 100% recycled paper using VOC (V olatile Or ganic Compound)-free vegetable oil based ink. Printed in Japan.
Een belangrijk punt na aankoop van elk apparaat Sony KLV-23HR1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sony KLV-23HR1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sony KLV-23HR1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sony KLV-23HR1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sony KLV-23HR1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sony KLV-23HR1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sony KLV-23HR1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sony KLV-23HR1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
