Gebruiksaanwijzing /service van het product 211948C van de fabrikant Spalding
Ga naar pagina of 25
1 01/04 P/N 211948C © COPYRIGHT 2000 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-333 061 Internet Address: http://www.
2 P/N 211948C 01/04 BEFORE YOU ST ART! T o ensure optimal playability of backboard system, a close tolerance fit between the elevator component s and hardware is required. T est-fit large bolt s into large holes of elevator tubes, backboard bracket s, and triangle plates.
01/04 P/N 211948C 3 W ARNING F AILURE T O FOLLOW THESE W ARNINGS MA Y RESUL T IN SERIOUS INJUR Y AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. • DO NO T HANG on the rim or any part of the system including bac kboard, support braces or net.
4 P/N 211948C 01/04 SAFETY I NSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for safe operation of the system.
01/04 P/N 211948C 5 For more information on assembly, placement, proper use, and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are p acked inside.
6 P/N 211948C 01/04 Get to know the basic parts of your basketball system..... STRUT BACKBOARD FRONT RIM BASE POLE ELEV A T OR SYSTEM WHEEL CARRIAGE ASSEMBL Y.
01/04 P/N 211948C 7 P ARTS LIST - (See Hardware Identifier) Item Qty. Part No. Description 1 1 904847 Top Pole Section 2 1 908482 Middle Pole Section 3 1 900284 Bottom Pole Section 4 1 206615 Base 5 4.
8 P/N 211948C 01/04 Item #10 (3) Item #14 (1 1)* Item #15 (1) Item #16 (2) Item #8 (1) Item #19 (1) Item #22 (4) HARDWARE IDENTIFIER (CONTINUED) * You may have extra parts with this model.
01/04 P/N 211948C 9 * You may have extra parts with this model. HARDW ARE IDENTIFIER (MET AL RODS, SP ACERS & W ASHERS) HARDW ARE IDENTIFIER (PLASTIC SP ACERS & CLIPS) Item #30 (2) Item #37 (8.
10 P/N 211948C 01/04 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION (not actual size) SECTION A : ASSEMBLE THE BASE This is what your system will look like when you’ve finished this .
01/04 P/N 211948C 11 1. Install wheel axle (64) through wheel carriage (65) and install wheels (5) onto wheel axle (64) with spacers (6) as shown. Secure wheel bracket as shown, a deep socket is recommended.
12 P/N 211948C 01/04 4. IMPORT ANT! Center alignment slot of lower pole section (3) in a lower hole of middle pole section (2) as in step 3. While maintaining alignment, bounce assembly and lower pole section (3) together as shown until they no longer moved toward taped reference mark.
01/04 P/N 211948C 13 Install rod (7) through holes in bottom pole section (3) and eyebolt (8). Insert pole assembly into tank assembly as shown. Secure pole assembly with upper pivot bracket (9) and lock nut (10). 5. 8 7 1 3 2 6. 9 10 4 3 TWO PEOPLE REQUIRED FOR THIS PROCEDURE.
14 P/N 211948C 01/04 CAREFULLY TIPPING THE SYSTEM FORWARD WILL ALLOW EASIER ACCESS TO UNDERSIDE OF BASE NOTE: 7. 12 13 13 11 3 3 11 4 11 15 8. 16 11 13 4 13 14 Secure base struts (1 1) to base using bolt (16), washers (13), and nut (14). Secure base struts (1 1) to pole using bolt (12), washers (13), and nut (15) as shown.
01/04 P/N 211948C 15 9. 18 13 17 28 21 13 10 22 10. 20 14 11 . 25 5 24 5 25 Insert carriage bolts (22) into middle set of holes on wheel bracket (21) as shown. Attach lower pivot bracket (17) to wheel bracket using bolt (18), washers (13), disc (28), and nut (10) as shown.
16 P/N 211948C 01/04 13. Carefully reposition entire assembly as shown. Attach front of plastic handle (26) to back of plastic handle (23) around handle bar (20) using self- tapping screws (27) as shown. IMPORT ANT! Front of plastic handle (26) should face outward, away from pole assembly .
01/04 P/N 211948C 17 17. 34 57 56 55 53 57 Attach sp acers (55, 56) to pole mount bracket (53) with bolts (33), washers (57), and nuts (34) as shown. IMPORT ANT! T ighten until washers (57) no longer move. 18. 33 53 14 60 58 59 Attach covers (58) onto pole mount bracket (53) with carriage bolt (39) and nut (14) as shown.
18 P/N 211948C 01/04 19. 52 14 49 48 50 51 60 20. 22 Apply logo and height indicator labels (52) to adjustment rod (51) as shown. Attach handle p arts (48, 49) to adjustment rod (51) with screw (50), carriage bolts (22), and flange nut s (14) as shown.
01/04 P/N 211948C 19 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION (not actual size) SECTION B: A TT ACH THE BACKBOARD This is what your system will look like when you’ve finished t.
20 P/N 211948C 01/04 21. ELEV A TOR INST ALLA TION 22. 31 30 34 33 29 32 35 38 37 36 35 29 42 37 Install sp acers (30) onto backboard brackets (29) with bolt s (31, 33) and lock nuts (32, 34) as shown. Assemble lower elevator tubes (35) as shown. T ighten completely .
01/04 P/N 211948C 21 24. 23. 29 14 61 14 39 38 36 37 37 40 40 29 Note S tarting with nuts (14) flush against bracket (29), secure rim (61) and bracket to backboard. IMPORT ANT! For spring loaded rim assembly , refer to instructi ons included with rim hardware.
22 P/N 211948C 01/04 25. 1 38 36 40 41 40 35 35 38 36 35 35 37 26. 42 38 36 40 40 27. Support pole on sawhorse. Attach backboard assembly to top pole section (1). Then install pole cap (41). NOTE: T wo people are recommended for this step. Use caution; elevator assembly is heavy .
01/04 P/N 211948C 23 10 f t. (3.05 m) 28. 32. HEIGHT ADJUSTMENT 30. 31. 29. 60 29. 31. 30. 46 44 45 TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. W ARNING! DO NOT ALLOW CHILDREN TO ADJUST HEIGHT.
24 P/N 211948C 01/04 33. Install clip s. CLI P “ARM” CLIP “BODY” Insert one “arm” of clip into ram as shown. T wist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in direction indicated by arrows.
01/04 P/N 211948C 25 Insert net into bottom of clip as shown. SIDE VIEW T wist net until it snap s into position. Net must be centered through clip. NET NETCLIP SIDE VIEW NET NETCLIP 34.
Een belangrijk punt na aankoop van elk apparaat Spalding 211948C (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Spalding 211948C heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Spalding 211948C vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Spalding 211948C leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Spalding 211948C krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Spalding 211948C bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Spalding 211948C kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Spalding 211948C . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
