Gebruiksaanwijzing /service van het product CP180i van de fabrikant Standard Horizon
Ga naar pagina of 92
CP180 / CP180i GPS Chart Plotters Owner's Manual CP180 CP180i.
WARNING!!! Electronic charts displayed by the GPS chart plotter are believed to be accurate and reliable, but are not intended to be a substitute for the official charts, which should remain your main reference for all matters related to the execution of safe navigation.
CLEANING PROCEDURE FOR THE GPS CHART PLOTTER SCREEN Cleaning of the chart plotter screen is a very important operation and must be done carefully. Since the surface is covered by a antireflective coat.
Page 6 CP180 / CP180i.
CP180 / CP180i Page 7 T ABLE OF CONTENTS 1. INTRODUCTION ...................................................................................................... 11 1.0 GENERAL INFORMATION ................................................................
Page 8 CP180 / CP180i 6. MAP FUNCTIONS ...................................................................................................... 37 6.0 MAX FUNCTIONS MENU ...................................................................................
CP180 / CP180i Page 9 12.0.3 Display Mode ............................................................................................. 63 12.0.4 Marine Settings .........................................................................................
Page 10 CP180 / CP180i 19. APPENDIX: TERMS ...................................................................................................... 89 INDEX ................................................................................................
CP180 / CP180i Page 11 1. INTRODUCTION Congratulations on your purchase of the Standard Horizon GPS chart plotter. Whether this is your first GPS chart plotter, or if you have other STANDARD HORIZON equipment, the STANDARD HORIZON organization is committed to ensuring your enjoyment of this GPS chart plotter.
Page 12 CP180 / CP180i S8101690 Power data cable S8002223 Flush mounting screws (CP180 ONLY ) EMO16N550 Flush mount template (CP180 ONLY ) Q7000559 GPS WAAS Smart antenna EM023U100 Owner’s Manual EM.
CP180 / CP180i Page 13 2. GETTING ST ARTED 2.0 MOUNTING THE GPS CHART PLOTTER The CP180 is supplied with hardware for bracket or flush mounting, the CP180i is supplied with only with hardware for bracket mounting due to the internal design of the GPS antenna.
Page 14 CP180 / CP180i 2. Drill a hole in one area of the cutout area that will allow the blade of a jig saw to be inserted. Insert and cut out the area on the panel using the jig saw. 3. Next drill the four holes required to insert the GPS chart plotter with the mounting studs.
CP180 / CP180i Page 15 1. Remove the threaded base from the antenna dome. 2. To ease installation a flush mounting template for the antenna has been included. 3. Apply the mounting template sticker to the area that was verified for GPS reception. 4. Then, drill out the 0.
Page 16 CP180 / CP180i 6 Gray Port2 Input Connect to Output of NMEA device Default is NMEA0183* 7 White Port2 Output Connect to Input of NMEA device Default is NMEA0183 with GLL, RMB, RMC and XTE sent.
CP180 / CP180i Page 17 2.5 BATTERY CONNECTIONS 1. The CP180 and CP180i are supplied with a fuse and holder. This fuse should be installed into the Black wire to protect the NMEA Output/Input circuits from becoming damaged. 2. Connect the Red and Black wires from the CP180 or CP180i to a 12VDC source directly as possible.
Page 18 CP180 / CP180i Figure 2.8 - FF520 50/200kHz BLACK BOX FISH FINDER 2.9 OUTPUTTING NMEA TO A PERSONAL COMPUTER The GPS chart plotter can be connected to output Marks, Routes and tracks to many PC programs available in the aftermarket. To send or receive User Points the PC Program must be able to receive NMEA WPL and RTE sentences.
CP180 / CP180i Page 19 the following order: Start-up screen, DSC Polling page, GPS Status, Chart/General window, Chart/Compass tape, Chart/Fish, Full page Fish, Navigation page, Highway Page, Celestial page, NMEA Page. NOTE This mode is use by selling dealers to promote the features of the CP180 and CP180i when on a retail shelf.
Page 20 CP180 / CP180i.
CP180 / CP180i Page 21 3. CONTR OLS AND INDICA T ORS NOTE This section defines each control of the GPS chart plotter. For instructions, refer to Getting Started and Advanced Settings sections of this Owner's Manual. 3.0 CONTROLS AND CONNECTIONS The GPS chart plotter is controlled by using the keys located on the front panel.
Page 22 CP180 / CP180i The MARK key Places a Mark under the ships position when in Home Mode (in Cursor Mode under the cursor). The ROUTE key When pressed places a Waypoint. Succeeding presses place more Waypoints to form a Route. The PWR key and Lamp/Contrast Press and hold [PWR] to turn the GPS chart plotter on or off.
CP180 / CP180i Page 23 01 11 13 17 20 22 03 06 07 09 AM 1 2 Cursor Ships Icon 2 1 Figure 3.1.0a - GPS Status and Chart pages 4. On the Chart page the ShuttlePoint knob is used to pan around the chart. Move the ShuttlePoint knob to the left and you will notice a cross hair appears, this is called the cursor.
Page 24 CP180 / CP180i Figure 3.1.2 - Cursor Speed menu 1. Press [MENU] . Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT] . 2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move the ShuttlePoint knob to the right.
CP180 / CP180i Page 25 intensity or up or down to change the LCD contrast. Press [ENT] to set. Figure 3.1.4 - Backlight and Contrast adjustment 3.1.5 Selecting North Up or Course Up The default select.
Page 26 CP180 / CP180i Figure 3.2 - Adjusting Time NOTE This map shows offset for standard time. For daylight saving time, subtract one hour from the offset time. Figure 3.2a - Time Setup menu 1. Press [MENU] . Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT] .
CP180 / CP180i Page 27 3.3 SELECTING LORAN TD OR OTHER COORDINATE SYSTEM The GPS Fix coordinates can be changed to show Latitude/Longitude, Loran TD’s or UTM. Below is the window that will appear when customizing the Coordinate System. Figure 3.3 - Coordinate System menu 1.
Page 28 CP180 / CP180i 4. A popup window will be shown with Normal, Classic, NOAA, Night and Sunlight. Move the ShuttlePoint knob to the desired selection and press [ENT] or move the ShuttlePoint knob to the right. 5. Press [CLR] or move the ShuttlePoint knob to the left to exit the menu and show the Chart page.
CP180 / CP180i Page 29 Chart and Optional devices information. Figure 3.8 - Information page 1. Press [MENU] . Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT] . 2. Move the ShuttlePoint knob to highlight About... and press [ENT] or move the ShuttlePoint knob to the right.
Page 30 CP180 / CP180i.
CP180 / CP180i Page 31 4. USING FIND SER VICES & MORE FUNCTION With a C-MAP NT + /MAX C-CARD installed the GPS chart plotter allows you to search for a Port Service, Port, Tide Stations, Wrecks, Obstructions, POIs, Lakes, User Points, or GPS Coordinates.
Page 32 CP180 / CP180i 4.2 INFO ON LAKES 4.2.0 Quick Info On Lakes Upon viewing the chart of a lake, you will click on to query the available information immediately displayed with many details.
CP180 / CP180i Page 33 To see the "Fishing" object press [MENU] (when the "Fishing" object is highlighted). On the screen appears: Figure 4.
Page 34 CP180 / CP180i.
CP180 / CP180i Page 35 5. C-MAP MAX O VERVIEW 5.0 INSERTING THE C-CARD Hold the C-CARD by the long inclined side so that you can see the C-MAP label. Figure 5.0 - Inserting C-CARD Open the door, gently push the C-CARD into the slot: push the C-CARD in as far as it will go, then close the door.
Page 36 CP180 / CP180i · Dynamic Elevation Data (optimized palettes for GPS chart plotters; includes new NOAA palette) · Perspective View ("Real World" perspective view of the chart, updat.
CP180 / CP180i Page 37 6. MAP FUNCTIONS 6.0 MAX FUNCTIONS MENU 1. Press [MENU] . Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT] . 2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move the ShuttlePoint knob to the right.
Page 38 CP180 / CP180i Figure 6.0.1 - Perspective View To activate this function follow the procedure: 1. Press [MENU] . Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT] . 2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move the ShuttlePoint knob to the right.
CP180 / CP180i Page 39 the ShuttlePoint knob to the right. 3. Move the ShuttlePoint knob to highlight SAFETY STATUS BAR and press [ENT] or move the ShuttlePoint knob to the right.
Page 40 CP180 / CP180i Caution Red when “Guardian T echnology” detects cautionary or restricted area. 6.0.4 Currents Prediction It is possible to see the variation of the Tidal arrows on the selected area at any given time. To activate this function follow the procedure: 1.
CP180 / CP180i Page 41 Press [ENT] for 1 second to display the image on the screen or press [ENT] to open the Full info on the object: Figure 6.0.5b - Example of Full Info on MULTIMEDIA object On the Full Info, there will be the small camera icon on a corner of the square containing the object icon.
Page 42 CP180 / CP180i.
CP180 / CP180i Page 43 7. CREA TING MARKS Definitions: MARK Can be a stand alone position or be linked to a Route. A Mark is place on the Chart page using [MARK] or by entering in information in the MARK/WAYPONTS List NEW MARK selection. WAYPOINTS Always linked to a Route.
Page 44 CP180 / CP180i 3. Move the ShuttlePoint knob to the right to select the Mark Name. Press [ENT] and the first digit in the name will be highlighted. 4. Move the ShuttlePoint knob up or down to select the first character. 5. Move the ShuttlePoint knob to the right to select the next character.
CP180 / CP180i Page 45 7.2 MARKS/WAYPOINTS LIST The MARKS/WPTS List shows all the Marks and Waypoints that have been stored into the GPS chart plotter.
Page 46 CP180 / CP180i 8. Move the ShuttlePoint knob up or down to select the first character. 9. Move the ShuttlePoint knob to the right to select the next character. 10. Repeat steps 8 and 9 until the Mark name is shown. Press [ENT] . 11. Move the ShuttlePoint knob to the right to select the Lat/Lon and press [ENT] .
CP180 / CP180i Page 47 2. Press [GOTO] to show the GOTO popup window. 3. Move the ShuttlePoint knob to highlight MARK and press [ENT] to show the MARKS/ WAYPOINTS List. 4. Move the ShuttlePoint to the highlight the desired Mark or Waypoint and press [GOTO] .
Page 48 CP180 / CP180i.
CP180 / CP180i Page 49 8. MAN OVER BO ARD (MOB) FUNCTION During navigation, the “MOB” feature provides a one-touch method of storing a location, such as a point were a crew member fell overboard.
Page 50 CP180 / CP180i.
CP180 / CP180i Page 51 9. ROUTES The GPS chart plotter has the capability to store, 20 Routes with a maximum of 30 Waypoints each. A Route can consist of Waypoints or Marks. The difference is when a Route is made using Waypoints and the Route is deleted the Waypoints are also deleted.
Page 52 CP180 / CP180i Figure 9.0 - Route Report 11. When finished press [ENT] to save. 12. Press [CLR] to show the Chart page. 9.1 MAKING ADDITIONAL ROUTES To create another Route the GPS chart plotter must be told that you want to create a second Route.
CP180 / CP180i Page 53 Point knob to the right. A popup window will be shown. 9. Move the ShuttlePoint knob up/down to change the characters and left/right to select a different character in the Routes Name. 10. When finished press [ENT] to save. 11. Press [ CLR] to show the Chart page is shown.
Page 54 CP180 / CP180i.
CP180 / CP180i Page 55 10. TRACKS The GPS chart plotter has the capability to store 5 individual tracks and record up to 3000 Track Points. Before using the Track function you will need to setup the Track function that suits your boat. The Track function tracks your vessels location as it moves through the water.
Page 56 CP180 / CP180i Figure 10.0 - Tracking 10.0.0 Saving and starting a new Track A Track is automatically saved to memory. To start a new Track: 1. Press [MENU] . Move the ShuttlePoint knob to highlight USER POINTS and press [ENT]. 2. Move the ShuttlePoint knob to highlight TRACK and press [ENT].
CP180 / CP180i Page 57 4. Press [CLR] or move the ShuttlePoint knob to the right until the selected page (Chart, Navigation, Highway or NMEA Data Page) is shown. 10.1.0 Resetting the Trip Log Select the page with TRIP LOG in one of the data windows as setup in the “Using the TRIP LOG” section.
Page 58 CP180 / CP180i.
CP180 / CP180i Page 59 11. USER C-CARD The Optional C-MAP User C-CARD is used to back up Marks, Routes, and Tracks stored in your GPS chart plotter's memory.
Page 60 CP180 / CP180i 11.0.1 Transferring files to the optional User C-CARD 1. Remove a C-MAP NT + /MAX C-CARD if present and insert the optional User C-CARD into the slot. 2. Press [MENU] . Move the ShuttlePoint knob to highlight USER POINTS and press [ENTR] .
CP180 / CP180i Page 61 12. P AGES The GPS chart plotter has many pages that are designed to ease your navigation. Figure 12 - Screen display pages The pages can selected from the Main Menu page following the procedure: 1. Press [MENU] . The following page is shown on the screen: Figure 12a - Main Menu 2.
Page 62 CP180 / CP180i S peed Over Ground and Course Over Ground 4 Cursor coordinates 2 Fix S tatus 1 Distance and Bearings from Fix to Cursor (if the Fix is NOT received, DST and BRG are empty) 3 Chart Scale 5 4 3 2 1 5 WAAS Figure 12.0 - Charts and general text area 12.
CP180 / CP180i Page 63 12.0.2 Turning Off Information on Icon Points The GPS chart plotter allows you to select to see information on points, all items or to turn this function off. 1. To change, press [MENU] . Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT] .
Page 64 CP180 / CP180i 12.0.4 Marine Settings To control the display on the map of the marine features. Place Names : Turns the Local area names On or Off. Names Tags : Turns On or Off a tag for particular chart objects that either includes the Name of the chart object or the Depth of an Underwater chart object.
CP180 / CP180i Page 65 Lat/Lon Grid : Turns the displaying of the Latitude and Longitude grid lines on or off on the chart page. Chart Boundaries : Turns the displaying of Chart Boundaries on, off or auto mode which shows the chart boundaries of the two charts below the current scale.
Page 66 CP180 / CP180i NOTE Data window field on the NAVIGATION, HIGHWAY, GPS STATUS, and NMEA pages may be customized in the above manner. 12.1 CUSTOMIZING CHART SETTINGS 1. Press [MENU] . Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT] .
CP180 / CP180i Page 67 T ime T o Go 4 Fix position 2 7 Compass T ape T ime 1 6 3 8 S peed Over Ground Course Over Ground Bearing to Destination 5 1 3 4 2 5 6 8 7 Distance to Destination Figure 12.
Page 68 CP180 / CP180i Figure 12.4 - Celestial page 12.5 GPS STATUS PAGE This page is used as a reference to see how well the GPS is receiving satellites. Figure 12.5 - GPS Status page The WAAS/GPS Icon area may change due to the satellite reception: ACQUIRING : the GPS is trying to receive a valid position fix.
CP180 / CP180i Page 69 Figure 12.6 - NMEA Display page The NMEA sentences read from external devices are: BWC, DSC, DSE, GGA, GLL, GSA, GSV, HDG, HDM, HDT, RMC, VHW, VTG, DPT, DBT, MTW, VWR, VWT, TLL, WPL, RTE. CHANGING the NMEA PAGE Windows 1. Press [MENU] .
Page 70 CP180 / CP180i FISH FINDER or a Digital Depth Sounder, Wind Speed/Direction, Speed Log with Temp with NMEA output the GPS chart plotter is capable of show Trends in the data from the device. To select a NMEA Trend Page: 1. Press [MENU] . Move the ShuttlePoint knob to highlight NMEA DISPLAY and press [ENT] .
CP180 / CP180i Page 71 12.9.2 Position Request STANDARD HORIZON VHF radios can transmit a DSC call to other equipped Vessels with a DSC VHF or request this radio transmit the GPS position.
Page 72 CP180 / CP180i.
CP180 / CP180i Page 73 13. AD V ANCED SETTINGS The Advanced Setup menu allows customization of many GPS functions, Alarms and NMEA interfacing. 1. Press [MENU] . Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT] . 2. Move the ShuttlePoint knob to highlight ADVANCED SETUP and press [ENT] or move the ShuttlePoint knob to the right.
Page 74 CP180 / CP180i Alter : Alternate Solution (TD Coordinate System) Parameter selected by the user that is applied in the conversion of TD values to geographical coordinates Lat/Lon. It defines which of the two possible solutions can be used. 13.
CP180 / CP180i Page 75 page is cleared (note that in this case, if the same object type is found again later, the Alarm will be shown). The GPS chart plotter shows an icon on the charts that identifies when a Grounding Alarm is detected. Figure 13.3 - Grounding Alarm a.
Page 76 CP180 / CP180i.
CP180 / CP180i Page 77 14. AIS AIS is an Automatic Identification System. It has been introduced to improve the safety of navigation by assisting in the efficient operation of ship-to ship, ship reporting and VTS applications.
Page 78 CP180 / CP180i is represented by a small oriented triangle. ♦ Lost T arget: When the AIS info is not received from that vessel for 3.5 min- utes. The presentation will be a flashing black triangle with a cross through. ♦ Activation Range: Range around your boat where target s become active.
CP180 / CP180i Page 79 14.3 QUICK INFO ON AIS TARGET By placing the cursor over a AIS Target icon, the following information is displayed: ♦ V essel Name ♦ MMSI number ♦ Radio Call Sign ♦ SOG ♦ COG ♦ CP A and TCP A values NOTE The selected AIS Target icon is surrounded by a square frame when user places the cursor over the icon.
Page 80 CP180 / CP180i.
CP180 / CP180i Page 81 15. C-MAP WEA THER SERVICE C-MAP Weather Service is an innovative meteorological forecasting system with the ability to visualize the weather forecast, overlaying it on cartography.
Page 82 CP180 / CP180i Figure 15.0.0 - Download Area Press [ENT] to activate the C-MAP Weather Download : the whole data package (see the previous "Weather data package" table) are downloaded. [CLR] allows to interrupt the data download. At the end of the operation press [CLR] to close the window.
CP180 / CP180i Page 83 16. TROUBLE SHOO TING The GPS chart plotter does not turn On. The voltage or the polarity may not be correct. Make sure that the correct voltage (10-35 volt dc) is present. Check also that the polarity is correct. The GPS chart plotter does not get a valid fix.
Page 84 CP180 / CP180i.
CP180 / CP180i Page 85 17. TECHNICAL TESTS 17.0 SYSTEM TEST If you have connected your GPS chart plotter according to the instructions, and chosen the proper menu selection for your device, and are still having problems with your GPS chart plotter, the extended auto-test should help determine the problem.
Page 86 CP180 / CP180i 17.0.2 Cartridges To check the C-CARD and its connector. Internal Data Base Test To test the WorldWideBackground. C-CARD Test To test the C-CARD. There are the possible situations: 1. if there is a C-CARD inserted in the slot and there is not a malfunction, the name of the C-CARD zone and the message "OK" are shown.
CP180 / CP180i Page 87 18. SPECIFICA TIONS 18.0 SPECIFICATIONS Power Consumption CP 180i : 520mA max @12V CP 180 : 460mA max @12V WITH E XTERNAL GPS CONNECTED CP 180 : 410mA max @12V WITHOUT E XTERNAL.
Page 88 CP180 / CP180i 18.1 GPS WAAS SMART RECEIVER SPECIFICATIONS This GPS WAAS Smart Receiver is based on a ultimate 12 channel GPS engine that delivers accuracy better than three meters by decoding the GPS correction signals from the satellite-based WAAS ( Wide Area Augmentation System ).
CP180 / CP180i Page 89 19. APPENDIX: TERMS ALT (Altitude) – Shows the Altitude of the vessel. APP Wind DIR SPD (Apparent Wind Direction) – Shows the Apparent Wind Direction when a external wind instrument with NMEA is connected.
Page 90 CP180 / CP180i LOW WATER – The minimum level of the tide height in 24 hours. Position Request – Marine DSC VHF Function of transmitting a GPS position to another Marine DSC VHF. When GPS chart plotter is connected to STANDARD HORIZON GPS the position of another vessel is shown on the Chart page.
CP180 / CP180i Page 91 INDEX A Adjusting Time ................................................ 26 AIS .................................................................. 7 7 Alarms ...................................................... 73, 74 ALT .....
Page 92 CP180 / CP180i H HDG ................................................................ 89 HDOP .............................................................. 89 HEIGHT .......................................................... 89 HIGH WATER ...
CP180 / CP180i Page 93 CODE: S3e/igSH5c_0ww 11.00cA77 - 080606 Surface Clutter ................................................ 39 T TD ................................................................... 73 temperature ................................
Page 94 CP180 / CP180i PLEASE NOTE The following "Limited Warranty" is for customers that have purchased products in the United States. For Limited Warranty details outside the United States, contact the dealer in your country.
Een belangrijk punt na aankoop van elk apparaat Standard Horizon CP180i (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Standard Horizon CP180i heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Standard Horizon CP180i vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Standard Horizon CP180i leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Standard Horizon CP180i krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Standard Horizon CP180i bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Standard Horizon CP180i kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Standard Horizon CP180i . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.