Gebruiksaanwijzing /service van het product IW12 van de fabrikant Stanley Black & Decker
Ga naar pagina of 22
USER MANUAL Safety , Operation and Maintenance IW12 HYDRAULIC IMP ACT WRENCH © 2014 Stanley Black & Decker , Inc. New Britain, CT 06053 U.S.A. 66023 7/2014 V er .
2 ► IW12 User Manual DECLARATION OF CONF ORMI TY ÜBEREINSTIMM UNGS - ERKLARUNG DECLARATION DE CONFOR MITE CEE DECLARACION DE CONFO RMIDAD DICHIARAZIONE DI CONFORM ITA Hydraulic Tools _______ ______.
IW12 User Manual ◄ 3 DECLARA TION OF CONFORMITY .......................................................................................................................... 2 SAFETY SYMBOLS .............................................................
4 ► IW12 User Manual Always observe safety symbols. They are included for your safety and for the protection of the tool. LOCAL SAFETY REGULA TIONS Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte- nance personnel.
IW12 User Manual ◄ 5 T ool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose. These safety precautions are given for your safe- ty . Review them carefully before operating the tool and before performing general maintenance or repairs.
6 ► IW12 User Manual The safety tag (P/N 15875) at right is attached to the tool when shipped from the factory . Read and understand the safety instructions listed on this tag before removal. We suggest you retain this tag and attach it to the tool when not in use.
IW12 User Manual ◄ 7 The rated working pressure of the hydraulic hose must be equal to or higher than the relief valve setting on the hy- draulic system. There are three types of hydraulic hose that meet this requirement and are authorized for use with Stanley Hydraulic T ools.
8 ► IW12 User Manual Oil Flow Hose Lengths Inside Diameter USE ( Press/Return) Min. Working Pressure GPM LPM FEET METERS INCH MM PSI BAR Certied Non-Conductive Hose - Fiber Braid - for Utility Bu.
IW12 User Manual ◄ 9 Flow Range Nominal Operating Pressure (at the power supply outlet) System relief valve setting (at the power supply outlet) Maximum back pressure (at tool end of the return hose) Measured at a max. uid viscosity of: (at min. operating temperature) T emperature: Sufcient heat rejection capacity to limit max.
10 ► IW12 User Manual WRENCH T ORQUE INFORMA TION F ACT ORS THA T AFFECT TORQUE An impact wrench is a rotary hammer that impacts the head of a bolt or nut. It does not apply a slow steady torque as a standard torque wrench. Therefore, sever- al factors affect the result of torque when using impact wrenches: 1.
IW12 User Manual ◄ 1 1 POST OPERA TION UNDERW A TER MODELS ONL Y The wrench impact mechanism must be cleaned and greased with waterproof grease after every day of use. The main housing valve and motor are sealed and do not require maintenance unless they are malfunctioning.
12 ► IW12 User Manual • Make sure all couplers are wiped clean before con- nection. • The hydraulic circuit control valve must be in the “OFF” position when coupling or uncoupling hydrau- lic tools. Failure to do so may result in damage to the quick couplers and cause overheating of the hy- draulic system.
IW12 User Manual ◄ 13 If symptoms of poor performance develop, the following chart can be used as a guide to correct the problem. When diagnosing faults in operation of the wrench, always check that the hydraulic power source is supplying the correct hydraulic ow and pressure to the tool as listed in the following table.
14 ► IW12 User Manual Drive Size ................................................................................... 3/4-inch Square Drive, 5/8-inch Hex Quick Change Weight ............................................................................
IW12 User Manual ◄ 15 IW12 STD IMP ACT MECHANISM ILLUSTRA TION Adapter Part Number 06790, used to adapt 3/4-inch Square Drive to 5/8-inch Hex Quick Change. Adapter P/N 01857, used to adapt 3/4-inch Square Drive to 3/4-inch 3-Jaw Jacobs Chuck. CLEAN, APPL Y 242 LOCTITE®, AND TORQUE (8) CAPSCREWS T O 28–30 FT LB / 37.
16 ► IW12 User Manual ITEM NO. P ART NO. QTY DESCRIPTION 1 07999 1 MAIN HOUSING ASSY – INCL ITEM 3 ALSO INCL BALL STOP 19454 AND STEEL BALL 51 185 NOT PICTURED 3 08014 2 DU BUSHING – GARLOCK 14D.
IW12 User Manual ◄ 17 HEA VY DUTY IMP ACT MECHANISM ILLUSTRA TION CLEAN, APPL Y 242 LOCTITE®, AND TORQUE (8) CAPSCREWS TO 28–30 FT LB / 37.9– 40.
18 ► IW12 User Manual ITEM NO. P ART NO. QTY DESCRIPTION 41 02685 4 CAPSCREW , 5/16-18 × 7/8 HEX SOCKET HD 42 08067 1 HAMMER 43 20257 1 HAMMER FRAME 44 08069 2 HAMMER PIN 45 22728 1 ANVIL – 3/4 IN. SQUARE DRIVE ST ANDARD 20263 1 ANVIL – 3/4 IN.
IW12 User Manual ◄ 19 ST ANDARD IMP ACT & HEA VY DUTY IMP ACT MECHANISMS IN DET AIL ST ANDARD MECHANISM HEA VY DUTY MECHANISM When ordering Impact Mechanism parts, rst determine which mechanism you have by visually inspecting the following two parts indicated by the arrows ( A : Hammer Case, B : Anvil).
20 ► IW12 User Manual For underwater hydraulic tools the applications are broken down into four quadrants depending on type of tool and method of operation. The types of tools are percussive and rotational, each with different characteristics allowing for dif- ferent depth operation.
IW12 User Manual ◄ 21 NOTES.
Stanley Hydraulic T ools 3810 SE Naef Road Milwaukie, Oregon 97267-5698 USA (503) 659-5660 / Fax (503) 652-1780 www .stanleyhydraulics.com.
Een belangrijk punt na aankoop van elk apparaat Stanley Black & Decker IW12 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Stanley Black & Decker IW12 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Stanley Black & Decker IW12 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Stanley Black & Decker IW12 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Stanley Black & Decker IW12 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Stanley Black & Decker IW12 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Stanley Black & Decker IW12 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Stanley Black & Decker IW12 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
