Gebruiksaanwijzing /service van het product PM1115P2 van de fabrikant StarTech.com
Ga naar pagina of 41
Manual Revision: 01/23/2014 For the most up-to-date information, please visit: www.startech.com DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.
Instruction Manual FCC C ompliance Statement This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits are desig ned to provide reasonable protection against harmful interference in a residential installation.
Instruction Manual 1 T able of C ontents Introduction ............................................................................................ 2 Packaging Conten ts ..................................................................................
Instruction Manual 2 Introduction Packaging C ontents • 1x Parallel P rint Ser ver • 1x Pow er Adapter • 1x Software CD • 1x Quick Start Guide Sy stem Requirements • Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, W indows® Ser ver 2008 R2, 2003(32/64), Mac OS 10.
Instruction Manual 3 P roduc t Overview LED Indicators LED State Indication Status Blinking for POST ( Y ellow) When power is connected, the S tatus indicator will ash ve times, and then go solid. 100Mbps On (Green) LAN Port has a valid network connection at 100Mbps.
Instruction Manual 4 Reset Button Reboot the Print Server: 1. V erify the power of print server is turned on. 2. Pr ess the reset button once, and then release it. Note: This will restart the print ser ver and st op all on- going and pending print jobs.
Instruction Manual 5 Soft war e Installation Window s 1. T o enable network communication with print server, y our computer must have a proper IP address, e .g. 192.168.0.100 (the print server ’ s default IP is 192.168.0.10) 2. Insert the setup CD into your CD/DVD drive.
Instruction Manual 6 5. F rom the “S elect A Print Sev er ” screen, select the print server that you want to congure and click Next..
Instruction Manual 7 6. Click “Y es, I want to change settings ” , then click Next to congure the IP settings of the print server to match your network. Note: The IP address of print server must be within the same subnet as your network adapter .
Instruction Manual 8 7. In the setup wizard, select an already congured print er from the list, click Nex t, Nex t and then F inish to complete the installation.
Instruction Manual 9 10. Make sure the Use the follo wing por t radio-button is clicked and select LPT1: (recommended Prin ter Port) from the pull-down list.
Instruction Manual 10 11. Select Manufac turer and P rinter from the lists of printer drivers. Then click Nex t . 12. If you already have the print er ’ s driver installed, you will be asked whether to keep it or to replace it. Click Next. Supply a name for the printer and choose whether you want to make it your default printer .
Instruction Manual 11 15. Click Start -> Devices and Printers and highlight y our newly installed printer..
Instruction Manual 12 16. Right-click, selec t Print er Properties , then the Ports tab and verify that the print server ’ s port appears..
Instruction Manual 13 17. Select the General tab and click Print T est Page t o verify the conguration. Note: If you want to install more print servers, start the setup wizard from y our Windows Start menu: Start -> All Programs -> Netw ork Print Server -> PSWizard and repeat the installation proc edure.
Instruction Manual 14 Mac OS T o use the print ser ver in Mac OS (10.2 and up), no software installation is requir ed. T he necessary conguration can be done through the Web Console . 1. Open your bro wser and enter the IP address of the print server in the address bar of your web bro wser ( Default: 192.
Instruction Manual 15 8. The print server should automatically display in the default list. Select it, then click the “Use” drop-down and click Select Printer Soft war e , to specify the model of the printer that is connected to the print server .
Instruction Manual 16 Operation PSAdmin Applica tion ( Window s) After the software has successfully been installed, you can start the PSAdmin utility from your Windows Start menu by clicking Start -&.
Instruction Manual 17 Print servers discover ed on the LAN will be displayed along the top portion of the window , with their respective Device Name, MAC A ddress, Print Server Name, F irmware Version, and S tatus. T hese terms are dened as follows: Device Name: The name of the print server used for identication purposes.
Instruction Manual 18 Setup Wizard The Setup Wizard is a conguration progr am that can assist you in setting up the necessary parameters for your print server device for either TCP/IP or NetW are. TCP/IP 1. Click the Wizard button from the PSA dmin tool bar .
Instruction Manual 19 NetW are 1. Log int o your NetWare le server as a Supervisor (Admin) or equivalent and run PSAdmin. 2. Click the Wizard button from the PSA dmin tool bar . 3. Select NetW are Wizard from the windo w that opens and then click Nex t .
Instruction Manual 20 Advanced Setup (Devic e Properties) The device properties screen oers sever al tabs with advanced conguration options. 1. Select the print ser v er that you wish to congure and click the Pr oper ties button from the PSAdmin toolbar .
Instruction Manual 21 TCP / IP T ab Choose either “Obtain an IP address from DHCP server” if there is a DHCP ser ver on your network. Or “Specify an IP address” to manually enter your desir ed IP settings for the device.
Instruction Manual 22 NetW are T ab Print Server Name: Type in the Print server that was cr eated using PCONSOLE. Bindery Settings (Optional): Selec t NetW are le server(s) using Binder y mode . NDS Settings (Optional): Select the NetWare le server(s) (NetW are 4.
Instruction Manual 23 Multiple Print Queues Congur ation T o congure the print ser v er to ser vice multiple print queues , please follow the instructions listed below: 1. Log int o your NetWare le server as a Supervisor (Admin.) or equivalent.
Instruction Manual 24 Firm ware Upgrade Upgrade allows y ou to upgrade the print ser v er device, in the event that a new rmware becomes a vailable. Note: Make sure that the upgrade le is locat ed in the same director y as PSAdmin. 1. Select the print ser v er that you wish to upgrade and click the Upgrade button fr om the PSAdmin toolbar .
Instruction Manual 25 T o access the web console: 1. Open your bro wser and enter the IP address of the print server in the address bar of your web bro wser ( Default: 192.168.0.10), then press Enter . 2. Enter your user ID and passw ord ( Default: admin / no password).
Instruction Manual 26 Syst em T ab Allows you to c ongure basic system settings. Click the Save & Restart button to apply any changes made. Email Alert: Enable/Disable Email Aler t support. SMTP Server IP Address: Input the IP address of y our SMTP ser ver .
Instruction Manual 27 Printer T ab Allows you to c ongure settings related to the connected printer . Click the Save & Restart button to apply any changes made. Printer P or t: Select the bi-directional por t operation mode . Options include Disable or Auto Detect.
Instruction Manual 28 TCP/IP Settings: Choose either “Obtain TCP/IP settings automatically (use DHCP/ BOOTP)” if there is a DHCP server on your network. Or “Use the following TCP/IP settings” to manually enter y our desired IP settings for the device.
Instruction Manual 29 NetW are T ab Allows you to c ongure NetWare r elated settings for the print server . Click the Save & Restart button to apply any changes made. Print Server Name: Input the print server name congured by the PSAdmin utility or PCOMSOLE prog ram.
Instruction Manual 30 Apple T alk T ab Allows you to c ongure AppleT alk related settings for the print server , to accept jobs from Mac workstations using this protoc ol.
Instruction Manual 31 SNMP T ab Allows you to c ongure Simple Network Management Protocol (SNMP) rela ted settings for the print server . A host on the network running Network Management System (NMS) software can access the print server device by r eading and writing the MIB objects stored in the device.
Instruction Manual 32 When an unusual condition or activity occurs, the SNMP agent alerts the SNMP manager through SNMP traps . The following list summarizes the SNMP trap messages that the print serv.
Instruction Manual 33 SMB T ab Allows you to c ongure Ser ver Message Block (SMB) printing . Click the Save & Restart button to apply any changes made . W orkgroup Name: Assign a workgr oup name to print ser ver t o identify the print server on the Network.
Instruction Manual 34 F actor y Default T o reset the unit to factor y default settings, click the OK butt on on this screen and conrm your choice. Firm ware Upgrade Allows you to upg rade the rmware on the print server . 1. Click the Choose File butt on.
Instruction Manual 35 Restart S ection The Restart Sec tion allow s you to save all changed settings and restart the print server. Click OK to perform the restart. T roubleshooting The following chart outlines common questions / issues and possible solutions.
Instruction Manual 36 Print jobs are sent t o the print queue successfully , but fail to be sent to the printer 1. The Print server Name/Print Q ueue conguration in PCONSOLE is incorrect. 2. The Print server name specied and stored in the print server memor y doesn ’t match the same one set in PCONSOLE.
Instruction Manual 37 Specications Number of Ports 1 Interface / Bridge Parallel Industry Standards IEEE 802.3 10BASE- T , IEEE 802.3u 100BASE- TX Connector(s) 1 x RJ-45 Female 1 x Centronics (36 p.
Instruction Manual 38 T echnical Suppor t StarT ech.com’ s lifetime technical support is an integral par t of our commitmen t to provide industry-leading solutions. If you ever need help with your pr oduc t, visit ww w .star tech.c om/suppor t and access our compr ehensive selection of online tools, documentation, and downloads.
Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one-stop source for every connectivity par t you need. F rom the latest technology to legacy products — and all the parts that bridge the old and new — we can help you nd the parts that connect your solutions.
Een belangrijk punt na aankoop van elk apparaat StarTech.com PM1115P2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen StarTech.com PM1115P2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens StarTech.com PM1115P2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding StarTech.com PM1115P2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over StarTech.com PM1115P2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van StarTech.com PM1115P2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de StarTech.com PM1115P2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met StarTech.com PM1115P2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
