Gebruiksaanwijzing /service van het product Wristop Computer X10 van de fabrikant Suunto
Ga naar pagina of 98
EN SUUNTO X10.
ALARM TIME/DA TE UNITS GENERAL REFERENCE USE BARO MEM ALARM DECLINA TION CALIBRA TE NA VIGA TE ROUTE NA VIDA T A TRACK BACK ACTIVITY GPS fix MEMORY TIME/DA TE DUAL TIME SYNC UTC LIGHT BRIGHT CONTRAST .
2 T ABLE OF CONTENTS 1. GENERAL IN FORMAT ION .. ....... ... ... .. ... ........ .. ... ... .. ........ ... .. ... ... ........ .. ... .. .. 6 1.1 CHECKLIST ........................................................... ..................................
3 3.3.4 Alti/Baro data display ..... ............................................................... ... 27 3.3.5 Reference altitude ............................... ............................................. 28 3.3.6 Barometric Memory .............
4 4. SUUN TO X10 I N ACTION ........ .. ... ... .. ........ ... .. ... ........ ... .. ... .. ........ ... ... .. ..... 60 4.1 MONT BLANC CLIMBING .......................................................... ............... 60 4.1.1 Arrival and initial prepara tions .
5 10. TE CHNICAL SPECIF ICATIONS ... ....... ........... .......... ........ ........... .......... 81 11. GPS DAT UM LIST ...... ........ ........... ....... ........... ........ .......... ........ ........... .. 82 12. LOCAL GRI D LIST ..... ......
6 1. GENERAL INFORMATION The Suunto X10 wristop computer is a reli able high-precision el ectronic instrument intended for recr eational use. Suunto X10 should not be substituted for obtaining measurements that require profes sional or industr ial precision.
7 1.3. W A TER RESIST ANCE Suunto X10 is water resistant. It s water resi stance is tested to 100m/330ft according to ISO 2281 standard (www .iso.ch). This means that you can use the Suunto X10 for swimming or other water sports activities but it should no t be used for scuba divin g or freediving .
8 Charging the b attery with a mains charg er T o charge the battery with a mains charger: 1. Plug the char ger into the mains outlet and attach its dat a clip firmly to your Suunto X10. 2. When the battery level indicator is full, di sconne ct the charger from the mains ou tlet.
9 The battery level indicator displays an estimate of the remaining battery level. The indicator value is obtained by referencing the current power consumption against th e measured discharge state of the battery . T he current power consumption varies depending on the function used.
10.
11 2.2. MENUS 2.2.1. Basic menu structure ALARM TIME/DA TE UNITS GENERAL REFERENCE USE BARO MEM ALARM DECLINA TION CALIBRA TE NA VIGA TE ROUTE NA VIDA T A TRACK BACK ACTIVITY GPS fix MEMORY TIME/DA TE.
12 The menus are organized hierarchically under the modes. When you select a mode with UP/DOWN, first the name of the mode is displayed, then its main display opens. When you scroll from one mode to another quickly , only the names of the modes are displayed.
13 3. MODES 3.1. GENERAL INFORMATION Suunto X10 has five dif ferent modes: T ime , Alti/Baro, Compass, Navigation and Activity . Y ou can switch between the modes with UP/DOWN. Each mode has several sub-modes. The mode indicator on the left side of the display indicates the active mode.
14 3.2.2. Stopwatch T o use the stopwatch: 1.Select the stopwatch sho rtcut with ST OP/BACK. 2.Press ST ART/DA T A to start the stopwatch. If you want to record a split time, press ST AR T/DA T A again. The split time stays on the display for three (3) seconds.
15 The current time is displayed on the bottom row for reference. 4. Set the cor rect hour with UP/DOWN and press ENTER. The minute selection is activated. 5. Set the corr ect minutes with UP/ DOWN and press ENTER. The alarm is now set and you return to the Alarm menu .
16 3.2.4. Time/Date The current time is visible on the second row of the T i me mode's main display . The dual time enables you to keep track of another time, for example, another time zone while traveling. The dual time can be di splayed as a shortcut on the third row of the T ime mode's main display .
17 Sync When the Sync setting is on, Suunto X10 sychronizes the current time from the satellite signal every t ime t he GPS is activated. Y ou will also have to set the correct UTC Offset for your time zone. If Sync is of f, the manually set time is not autom atically updated.
18 3.2.5. Unit s The Units menu includes the unit and format settings used with all the Suunto X10 functions. They have an ef fect on how the information is displayed in all the modes. Setti ng the time format The time format sett ing defines whether the 1 2h or 24h format is used.
19 Setting the temperature unit The T emp setting defines the unit in wh ich the temperature is displayed. The options are Celsius (°C ) and Fahrenheit (°F). T o chan ge the temperature unit: 1. In the Set menu, scroll to Unit s and press ENTER. The Units menu is displayed.
20 Setting the vertical spe ed unit The V ert setting defines the unit that the altimeter uses. The options ar e meters per minute (m/min), mete rs per hour (m/h), feet per minute (ft/min) and feet per hour ( f t/h). T o change th e vertical speed unit: 1.
21 Setting the datum The Datum setting defines the map datum you use. (For more information on different datums and their corresponding numbers, see the GPS Datum List appendix.) T o set t he datum: 1. In the Set menu, scroll to Unit s and press ENTER.
22 T o set the position format: 1. In the Set menu, scroll to Uni ts and press EN TER. The Units menu is displayed. 2. Scroll to Position and press ENTER. 3. Select the desired forma t with UP/DOWN and press ENTER. The position format is now set. The following table shows you the possible p osition formats and whether they use a datum or a grid.
23 3.2.7. General The General menu contains several general settings for your Suunto X10. Setting the light With the Light setting you can adjust the bac klight of the Suunto X10 display .
24 Setting the co ntrast This setting adjust s the contrast of the Suu n to X10 display . The contrast is measured on a scale of 1 (minimum) to 9 (maximum). The maximum contrast setting consumes more power than the min imum setting. T o change th e contrast: 1.
25 3.3. ALTI/BARO MODE The Alti/Baro mode is used for me asuring altitude, ba rometric pressure and temperature. Suunto X10 calculate s the altitude from the current barometric pres sure, which is more sensitive and accurate than the altitude measurement with the GPS, and is also available when the GPS is off.
26 T o change th e Use setting: 1.In the Set menu, scroll to Use and press ENTER. The Alti/ Baro field is activated. 2.Se lect alti or baro with UP/DOWN and press ENTER. 3.Press STOP/BACK to return to the main display . 3.3.2.Alti use When you select Alti, the following main display opens.
27 3.3.3. Baro use When you select Baro, the following main display opens. It has three rows: Sea level barometric pressure: The first row displays the barometric pressure at sea level in the unit of your choice.
28 3.3.5. Reference altit ude T o ensure tha t the altimeter shows correct readings, you first need to set an accurate reference altitude. T o do this, go to a location whose altitude you have ch ecked, for example, with the help of a topographical map, and set t he reference altitude to match the map r eading .
29 3.3.6. Barometric Memory The Baro mem function stores weather-r elated information (sea level barometric p ressure) from the la st 7 days/168 hours. T o view the weather information: 1. In the Set menu, scroll to Baro mem with UP /DO WN and press ENTER.
30 T o activate or deactivate the weather alarm: 1.In the Set menu, scroll to Alarm with UP/DOWN and press ENTER. The Alarm menu ope ns. 2. S crol l to Baro Al with UP/DOWN and press ENTER. The On/Off field is activated. 3.Change the field to either On or Off with UP/DOWN and press ENTER.
31 3.4. COMP ASS MODE The compass mode aids the G PS functions and of fers you navigational support even when the GPS is off. In the Compass menu you can set the declination and calibrate the compass to ensure accurate readings in any location. 3.4.1.
32 Bearing (be a): If you are navigating a route from the Navigation menu, the third shor tcut displays the bearing to the next wayp oint. If you have not activated a route and the GPS is on, the shortcut displays the bearing to the start position (where the GPS o r an activity w as sw itched on).
33 2. Hold yo ur Suunto X10 hor izontally level and rotate it 360 degrees in the direction o f the arrows for 30 seconds. If the calibrat ion succeed s, the message ‘COMPLETE’ is displayed. If it does not succeed, the me ssage ‘F AILED’ is displayed.
34 Setting the compass declination manually T o set the compass declination manually: 1.In the Set menu, Declination is the first me nu item. Press ENTER to select it. T he On/Of f/Auto field is activated. 2.Se lect On with UP/DOWN and press ENTER. The direction field is activated.
35 3.5.1. Using th e Navigation mode This section contains a brief guide on how to use the Navigation mode. Y ou can find more detailed instructions in the sections below . T o use the Navigation mode: 1. Create a route either on Suunto X10 or using Suunto T rek Manage r and transfer it to Suunto X10 (section 3.
36 W aypoint: When Navigate is on, the first row displays the name and number of the navigated waypoint. If Navigate is of f, it displays the position wh ere the GPS was first activated (this point is named ST AR T). Dist ance to waypoint: When the GPS is on, the second row displays the d ist ance to the next waypoint.
37 3.5.3. Creating a rou te Suunto X10 does not include any factory-set r outes. So, to be able to use the route function, you first ne ed to create a rou te. Y ou can store up to 50 routes in the memory . Each route can include 50 waypoints, ten of which can be alarm points.
38 Creating a new waypoin t to a route by entering the coordinates With this function you can add new way points to previously created routes. T o creat e a new waypoint: 1.In the Set menu, scroll to R oute and press ENTER. The route list is displayed.
39 5. Choose t he order number and the name of the new waypoint, and ad d the bearing and the distance from the previously selected way point. 6. Press ST OP/BACK if you want to return to the waypoint list without accepting changes. 7. Long pr ess ENTER to accept the changes and return to the main display .
40 The symbol options are: Y ou will navigate from the beginning or the active waypoint to th e end of the route. When you arrive at the waypoint, Suunt o X10 will automatically activate the next waypoint. Y ou will navigate in the reversed order , from the end or from the active waypoint to the beginning of the route.
41 V iewin g waypoint s T o view wa ypoints: 1. In the Set menu, scr oll to Route and press ENTER. The route list is displayed. 2. Select a r oute with UP/DOWN and press ENTER. A list of waypoints is displayed. 3. Select a waypoint with UP/DOWN and press ENTER.
42 MyPoint s The MyPoints function stores up to 50 indi vidual waypoints (10 of which can be alarm points) that are not affixed to a route in the Suunto X10 memory . T o navigate to a MyPoints wp: 1.In the Set menu, scroll to R oute and press ENTER. The route list is displayed.
43 3.5.5. Editing routes a nd waypoint s Y ou can edit the routes and waypoint s you have created and erase those that you no longer need. Editing waypoints T o edit a waypoint: 1. In the Set menu, scr oll to Route and press ENTER. The route list is displayed.
44 When the EPE = 1m and GPS signal strength indicator show s 5 bars, th e location is updated automatically . Y o u can also accept a lower accuracy b y pressing ENTER. Erasing a route T o erase a route: 1.In the Set menu, scroll to R oute and press ENTER.
45 3.5.6. Navigation dat a displays All navigation data displays show you in fo rmation regarding the selected route and it s waypoints. The amount of dat a you receive depe nds on your selections. Y ou cannot use this function befor e you have activated a r oute.
46 Route sum mary The summary displays the name and to t al length of the route, the number of waypoints and the total ascent. W aypoint dat a p ages These pages display the name of the waypoint, distance, bearing and altitude difference. The method how the information is displayed depends on the selected navigation method.
47 NOTE: If you are current ly navi gating, and approach the next point, this waypoint data p age displays the distance and time to that point. Navi gation metho ds and the T rack b ack function After you have selected a route and pressed ST ART/DA T A, you can only see the summary page.
48 Cross T rack Error (xte): This is the shortest distance from your current location to the straight line connecting the waypoints of the route. S peed (s p d ): Displays the speed in the unit of your choice. Heading ( hea): Displays the heading in degrees.
49 3.6. ACTIVITY MODE While the Navigation mode shows you where to go, the Activity mode displays your current performance. It is the mode you need w hen you want to measure an d record your activity , be it running in your neighborhood or navigating in the wilde rness.
50 3.6.2.Activity The Activity function records da ta from a track. T o use the Activity function: 1.In the Set menu, Activity is the first menu item. Press ENTER to select it. T he symbol field is activated. 2.Choose the desired activity symbol w ith UP/DOWN and press ENTER.
51 3.6.3. GPS fix The selected GPS fix interval determine s how of ten your Suunto X10 establishes a satellite connection and how often it stores data in the memory . This in turn affects the battery life. T o select a GPS fix: 1. In the Set me nu, select GPS fix with UP/DOWN and press ENTER.
52 power), it displays when the data from the last locatio n was valid. It displays when the data was not sufficient. NOTE: If you w ant to only record the altitude profile of your activity without GPS positioning, set the GPS fix interva l to Manual and start the activity .
53 V iewin g lo g files T o view a log file : 1. Vi e w is displayed in reve rsed color . Press EN TER to select it. Y ou can scroll the log information pages with UP/DOWN.
54 3.6.5. T rack back (track log) Y ou can use the Activity mode’s T rack Back function to naviga te along any track log file found in the memory . Suunto X10 will guide you to the nearest waypoint and from there to the starting location, or to the finish if you so choose.
55 3.6.6. Activity data display The Activity data display shows you the inform ation summary for the current activity or in case you do not have a current one, the latest activity . T o activate the display , press ST ART/DA T A in the Activity mode’ s main disp lay .
56 3.7. FUNCTION MENU T o enter the Function menu, long press EN TER in any of the main displays. The Function menu opens and the follow ing functions are available. 3.7.1. GPS The GPS function allows you to turn the GPS on or off. T o turn the GPS on or o f f: 1.
57 3.7.3. Mark Home With Mark Home function you can store a position where you wish to return. Af ter storing the position, you can start search ing for it with the Find Home function. T o store a position: 1. In the Function menu, scro ll to Mark Home and press ENTER.
58 The Find Home display show s the following information: Heading: The sighting marks appear on the upper corner of the display and the circular bearing indica tor appears on the outer rim of the display . When the bearing indicator is inside the sighting marks, you are moving in the direction of the set bearing.
59 T o view the Find Home data display: 1. In the F ind Home display , press ST AR T/DA T A to enter the Find Home Data display . There you ca n see the recording time on the upper row and the coordinates and the bearing on the lower rows. 2. Press STOP/BACK to exit the Find Home Data display .
60 4. SUUNTO X10 IN ACTION 4.1. MONT BLANC CLIMBING In this chapter you will fo llow an American mountaineer on his independent two-day trip to the summit of Mont Blanc along the G outer route.
61 4.1.2. First hiking day While starting to hike, he set s the GPS fix to 1 sec in the Activity mode and select s as the Activity option. He cho oses th e 1 sec option because he wants the GPS to update the information as often as possible.
62 As he enjoys the beautiful scenery on his hike towards Gla cier de T ete Rousse, he also notices that clouds ar e disper sing from the sky , which gives him a reason to suspect that the barometric pressure h as changed.
63 4.1.3. Second hikin g day Right on time, Mike wakes up t o a beeping sound, sh ut s down the alarm w ith a press of a button, and checks the Baro mode.
64 Mike has planned the trip carefully , trai ned meticulously on easier cliffs, purchased proper equipment and le arned how to use it. He is now ready for the arduous journey that will take him to the top.
65 4.2. CROSS COUNTRY R UNNIN G This section describes a typical way to use your Suunto X10 in such spor t s activities as running or cycling, where speed and d i st ance information is nee ded more often than navigation. Early Sunday morning, Roger Runner wakes up to the beep of h is Suunto X10.
66 5. GLOBAL POSITI ONING SYSTEM (GP S) Suunto X10 uses Global Positioning System (G PS) in determining the user's posit ion. GPS incorporates a set of satellites that orbit the Eart h at the altitude of 20 0 00 km at the speed of 4 km/s.
67 If possible, stay clear from people, trees or other dense vegetation when activating the GPS. They can cause problems to the si gnal r eception . If you are in a fore st, try to find an open or scarcely wooded ar ea before activating the GPS.
68 activate the receiver more quickly , if y ou turned it off in between. Some downloaded data remains valid for several weeks, and s ubsequent GPS starts will t ake less time. STRIVE FOR IDEAL AC CURACY CONDITIONS Under all-in-view satellite co nditions a global average horizont al positioning error is 7.
69 6. SUUNTO TREK MA NAGER Suunto T rek Manager (STM) is a software designed to enhance the functionality o f your Suunto X10. Y ou can use it to perform various tasks such as transferring routes or waypoints stored in the Suunto X10 me mory . When you have transferred the dat a, you can easily organize, view and ad d related information in it.
70 6.4. SUUNTO T REK MANAGER FEATURES The Suunto T rek Manager display is divi ded into six separate windows. These windows are shown in the figure below a nd t heir functio ns ar e briefly introd uced in the following sections. (For more detailed in structions, see Suunto Trek Manager Help.
71 6.4.1. X10 window ( 1) The toolbar on the top of the X10 window contains four icons: • Connect t o X10: With this icon you can create the connection betw een your Suunto X10 and STM. • Download selected item( s) to folder: With this icon you can transfer data from Suunto X10 to STM.
72 6.4.2. Local Dat a window (2) The toolbar on the top of the Local Data window cont ains five normal icons and a menu icon: • Draw / Focus: With this icon you can dr aw r outes on t he map. Whe n you hold your left mouse button you can also scroll the map w ith your mouse.
73 When you click the menu icon on the r ight side of the toolbar , the following men u opens. The availability of the menu functions depends on the selected file or folder . Draw: Expla ined along with the other icons of the Local Data window . •Add map: Add a map in the selected folder .
74 6.4.3. Map windo w (3) The toolbar on the top of the Map window a variable number of icons depending on your selections: • 2D / 3D view: With this icon you ca n display the routes either in 2D or 3D format • Create route and add points from map: Cli ck on this icon to create a new route.
75 6.4.4. Profiles window (4) In this window yo u can view your altitude profiles and exact speed details as graphs. The toolbar on the top of the Profiles window contains three icons: Tim e : With this icon you can view t he information by time periods.
76 7. SUUNT O TRACK EXPORTER Suunto T r ack Exporter is an applicat ion used for exporting track logs from yo ur Suunto X10 to the Google Earth mapping ser vice. Y ou can then view your tracks on the Google Earth satellite imagery and maps. For exporting logs to Google Earth you must have the Google Earth application installed on your PC.
77 window . Bolded font indicates that the log has not previously been exported t o Google Earth. 4. Select the tr ack log you want to expo rt to Google Earth and click the Export t o button. A preview of the selected track is shown on the watch display in the Suunto T ra ck Exporter application win dow .
78 9. SUUNT OSPORTS.COM SuuntoS ports.com is an Internet community for all Suunto spor t s instrument users. It is a service that adds a new dimension to your sport and to the way in which you use your sports instrument.
79 9.2. SECTIONS SuuntoS ports.com includes three se ctions for dif ferent levels of priva cy . My Suunto is your personal area that other users do not have access to, Communities includes functions for groups, and S ports Forums contain information tha t members have published for all SuuntoS ports visi tors.
80 published in a community is only visible to the members of the communit y . Communities can be either open o r closed. T o pa rticipate in the activities of a closed community , you fir st have to be invited or you have to apply fo r membership and be accepted.
81 10. T ECHNICAL SPECIFICATIONS General • Operating T emperatur e -20 °C to +60 °C/-5 °F to +140 °F • S torage T emperature -30 °C to +60 °C/-22 °F to +140 °F • W eight 76 g • W a ter.
82 1 1. GPS DA TUM LIST Suunto X10 of fers the use of several dif ferent GPS datums that can be activated with the Suunto T r ek Manager software with the help of the PC interface.
83 025 EUR-T T unisia 026 LEH Ghana 027 LIB Liberia 028 MAS Eritrea 029 MER Morocco 030 MIN-A Cameroon 031 MIN-B Nigeria 032 MPO Gabon 033 NSD Algeria 034 OEG Old Egypt 035 PTB Mean Solution (Burkina .
84 057 NAH-B United Arab Emir ates 058 NAH-C Saudi Arabia 059 F AH Oman 060 QA T Qatar 061 SOA Singapore 062 TIL Brunei and East Ma laysia (Sarawak and Sabah) 063 TOY -M Mean So lution ( Jap an, Okina.
85 088 OGB-D W ales 089 MOD Sardinia 090 SPK-A Hungary 091 SPK-B Poland 092 SPK-C Czechoslovakia 093 SPK-D Latvia 094 SPK-E Kazakhst an 095 SPK-F A lbania 096 SPK-G Romania 097 CCD Czechoslovakia 098 .
86 120 NAR-E Aleutian Islands 121 NAR-B Canada 122 NAR-C CONUS 123 NAR-H Hawaii 124 NAR-D Mexico and Centr al America 125 BOO Columbia 126 CAI Argentina 127 CHU Par aguay 128 COA Brazil 129 PRP-M Mean.
87 151 SAN-L V enezuela 152 ZAN Suriname 153 AIA Antigua, Leeward Islands 154 ASC Ascension Island 155 SHB S t. Helena Island 156 BER Bermuda Islands 157 DID Deception Island, Antarctica 158 FOT Nevis, S t.
88 183 IBE Efate and Erromango Island s 184 CAO Phoenix Islands 185 CHI Chatham Island s (New Zealand) 186 GIZ Gizo Island (N ew Georgia Islands) 187 EAS Easter Islands 188 GEO New Zealand 189 GUA Guam 190 DOB Guadalcanal Island 191 JOH Johnston Island 192 KUS Caroline Islands, F ed.
89 215 VOI T unisia/Algeria 216 VOI-2 T unisia/Algeria 217 Y AC Uruguay 218 RT90 Sweden 254 KKJ Kartt a Koordinaatisto Järjestelmä, Finland 255 WGS84 Global WGS84 coordinate system (This is the defa ult datum and the most widely used degree- b ased coordina te system.
90 12. LOCAL GRID LI ST Suunto X10 of fers the use of several different local grids that can be activated with the Suunto T re k Manager sof tware with the help of the PC interface. Here is the list of available local grids and the number codes used in the activa tion process.
91 13. GL OSSAR Y Alarm point Position coordinates of a specific point on a route or in the MyPoints function that you can use, for example, to warn you about rocks and other hazards. Altitude difference (dif) Altitude differ ence between your current p osition and the next wayp oint in the unit of your cho ice.
92 you to locate or r eport on a specific point on the map. Heading (hea) Compass direction on the present course. Latitude Angular distance North or South of the Equator .
93 14. DISCLAIMERS 14.1. USER ’ S RESPONS IBILITY Do not use Suunto X10 as the only navigati on aid. Use all avail able navigation aids such as charts, comp ass, visual sightings etc. and compare them with the Suunto X10 navigation information. Make sure all co nflicting information is resolved before continuing with navigation.
94 purchaser and only covers failures due to def ects in materials and workmanship that occur during normal use while in th e period of the warranty . It does not cover battery , bat tery replacement,.
95 This device complies with Part 15 of the FC C limits for class B digital devices. This equipment generates, uses, and can radiat e radio frequ ency energy and, if not installed or used in accordance with the inst ructions may cause harmful interference to radio communications.
Suunto Canada.
Suunto Oy 7/2008.
Een belangrijk punt na aankoop van elk apparaat Suunto Wristop Computer X10 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Suunto Wristop Computer X10 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Suunto Wristop Computer X10 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Suunto Wristop Computer X10 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Suunto Wristop Computer X10 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Suunto Wristop Computer X10 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Suunto Wristop Computer X10 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Suunto Wristop Computer X10 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
