Gebruiksaanwijzing /service van het product GX540 van de fabrikant Svat
Ga naar pagina of 22
COLOUR 2.4GHz WIRELESS DVR SYSTEM WITH TFT-LCD HANDHELD MONITOR AND INDOOR CAMERA COLOREZ LE SYSTÈME SANS FIL DE 2.4GHZ DVR AVEC LE MONITEUR TENU DANS LA MAIN DE TFT-LCD ET LA CAMERA D'INTÉRIEU.
1 TABLE OF CONTENTS SAFETY PRECAUTIONS ..........................................................1 PACKING LIST ......................................................................2 FUNCTIONS AND PARTS LISTS .........................................
PACKING LIST Check to make sure all of the items shown below are included in your Wireless Digital Video Recording System . If something is missing, contact your dealer as soon as possible. MPEG4 DVR Colour Camera AV Cables AC Adapters Handheld Monitor FUNCTIONS AND PARTS LIST MPEG4 DVR Handheld Monitor -Side View 1.
3 FUNCTIONS AND PARTS LIST MPEG4 DVR Handheld Monitor -Front View 1 LCD: 2.5" Colour TFT-LCD 2 POWER LED : Lights up when POWER ON. 3 STATUS LED : Lights up when recording, flashes when storage or otherwise unlit. 4 REC BUTTON : Press to start manual recording.
4 FUNCTIONS AND PARTS LIST MPEG4 DVR Handheld Monitor -Front View 1 IR (infrared) LED: Emit invisible IR light to see in the dark. 2 CAMERA LENS 3 BRACKET HOLE: There is a hole on the top of the camera for ceiling mounting and the bottom for other mounting solutions.
5 CONFIGURATION 1 RF Camera: Switch INPUT SOURCE to "RF". Install camera to a high position in order to avoid from motion interference and reduce effects of transmission quality. When low signals occur, please adjust the antenna to the appropriate angle for the optimum receiver/ transmission performance.
6 OPERATION Power On 1 Before turning the system on, please check the local area video system (NTSC/ PAL). The VIDEO SYSTEM is situated on the right side panel; this setup will affect the video system input and output. NTSC is the standard video system in North America.
7 c. Monitoring Display: Press DISPLAY button to switch between LCD display mode and OSD info. 1 Time Display: System Date and Time. 2 Record Status Display: : Connect the camera to the AV terminal. : Record Resolution, please refer to Record Setup for VIDEO SIZE setup.
8 Manual Record Repress REC button. Schedule Record After exit playback or menu mode, whether Motion Detection Record the setup has been changed or not, the system will auto re-check the record schedule setup again. 3 Record Display Indicates recording is in progress.
9 Playback Mode Selectable Playback format: Continuous Playback and Searching Playback. A. Normal Playback: Press button to playback according to the CF card file order recorded. : Normal speed playback. : Fast Rewind and Fast Forward (Speed: x2/ x4/ x8/ x16/ x32).
10 • Withdrawing the CF card during playback, stops playback and enters the monitoring mode. • The device supports playback only to images recorded by our device, other ASF video files are not guaranteed. PC Playback 1. The device uses a CF card as its main storage.
11 MENU SETUP MAIN MENU 1 MAIN MENU: Item subject. 2 Menu Layer Indication: The device consists of three menu layers. : First Menu Layer (Main Menu) : Second Menu Layer : Third Menu Layer 3 MENU Content: Basic Menu Operations. Press or button, to move the highlight-bar and the cursor ( ).
12 Motion Detection 1 Window setup : 1 Detection Cell: Whole screen is divided into 22x15 square cells. 2 Detection Block: Two or more cells form a block. 3 Cursor: Press [PLAY] button to switch to Select/ Edit mode. 4 Detection Block: Area that is being targeted for motion detection.
13 1 Sensitivity Bar: The color black indicates the image variable value and color red indicates the motion detection threshold. 2 MD Energy: Current image variation value. 3 MD Threshold: Press or button, to change the motion detection threshold value.
14 RECORD: Enable or disable the schedule recording (ON/ OFF). SCHEDULE: ab:cd - ab:cd = 24 hour recording and 00:00 - 00:01 = Record of one minute image from 00:00 to 00:01.
15 POWER ON SETUP 1 CF AUTO REPAIR: CF auto repair on/off during power on. 2 RF CHANNEL: RF channel selection during power on. 3 SPK VOLUME: Speaker volume setup during power on. 4 LCD: LCD on/off during power on RETURN TO FACTORY DEFAULT VALUE TROUBLESHOOTING A Power Q: Why are there no images after power-on? A: a.
16 and the main device have been setup to the same channel. If you have 2 wireless IR cameras, one should select channel 1 & 3 or 2 & 4 to obtain the optimum result. b. Prevent obstructions (caused by wall or steel) between the main device and the camera during transmission.
17 card status info). c. [ CF Card Management] When the recording method is not setup as continuous recording, it stops recording when the storage capacity is full. d. Unable to perform schedule recording, please refer to [Record Mode - Stop Record]. e.
18 MONITOR SPECIFICATIONS GX5400: 2.4GHz Wireless Digital Video Recording System Contact support@svat.com if a french version of this manual is required.
GX5400: 2.4GHz Wireless Digital Video Recording System now you can see www.svat.com.
.
22 • Håll det elektriska verktyget i de isolerade handtagen/ytorna eftersom klippbladen kan komma i kontakt med dolda sladdar eller verktygets egen sladd (om en strömförande sladd skadas a v klip.
Een belangrijk punt na aankoop van elk apparaat Svat GX540 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Svat GX540 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Svat GX540 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Svat GX540 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Svat GX540 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Svat GX540 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Svat GX540 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Svat GX540 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
