Gebruiksaanwijzing /service van het product LW050UK van de fabrikant Sweex
Ga naar pagina of 22
English version 4 L W050/L W050UK Sweex Wireless Broadband Router 54 Mbps Introduction First of all, many thanks for purchasing this Sweex Wireless Broadband Router 54 Mbps. The Sweex Wireless Broadband Router 54 Mbps enables you to share a broadband Internet connection and to set up your own wireless network.
English version 5 Specifications • Supports: IEEE 803.3 and IEEE 803.3u • Supports: IEEE 802.11b, IEEE 802.11g • Maximum wireless data transfer speed: 54Mbps • Supports: DHCP (dynamic IP), PPTP , Static IP , PPPoE, L2TP • 1 x WAN, 4 x LAN RJ-45 UTP ports • Supports: WEP/WPA.
English version 6 Rear view • Antenna with reverse SMA connector . • Reset button to return to the factory settings • WAN port for connecting a modem by means of a RJ-45 UTP Ethernet network cable. • LAN ports 1, 2, 3 and 4 for connecting computers by means of an RJ-45 UTP Ethernet network cable.
English version 7 Configuring the computer to connect to the router Windows XP In the bottom left of your screen, go to “Start” “Control Panel” Then go to “Network and Internet Connections”. Open “Network Connections”. Or , if the Windows classic style is used: “Start” “Settings” “Network Connections”.
English version 8 Windows 2000 In the bottom left of your screen, go to “Start” “Control Panel”. Then go to “Network and Internet Connections”. Open “Network Connections”. Or , if the Windows classic style is used: “Start” “Settings” “Network Connections”.
English version 9 Windows 98SE Go to “Start”, “Settings”, “Control Panel” and click “Network”. Select the line “TCP/IP ” which corresponds to your (wireless) network card and click “Properties”. Under the tab “IP Address”, select the option “Obtain an IP address automatically”.
English version 10 Under the tab “DNS Configuration”, select the option “Disable DNS”. Click “OK” twice. The network settings for Windows 98SE have now been configured correctly . Now continue with the correct settings for the Internet browser below.
English version 11 Connecting the computer to the wireless network In the bottom left of your screen, go to “Start” “Control Panel”. Then go to “Network and Internet Connections”. Open “Network Connections”. Or , if the Windows classic style is used: “Start” “Settings” “Network Connections”.
English version 12 Accessing the router (Login) Open your web browser. In this example we use “Internet Explorer”. The default router IP address is: 192.168.50.1 An IP address is a unique number requ ired by each netw ork devic e, includi ng a computer or router , in order to be active within that network.
English version 13 Once logged in, the status screen of the router appears. This screen displays the current Inter net connection and a variety of system information. Setting the Internet Provider (ISP) Prior to setting the provider , make sure that the Internet connection is active without the Sweex Breedband Router.
English version 14 Setting 1 DHCP without hostname 1. Left in the column, click “Network". Now click “WAN”. 2. Under “W AN Connection T ype” select “Dynamic IP”. This setting is for providers who use a DHCP connection. 3. Click “Save” to save the settings.
English version 15 Setting 2 DHCP with hostname Important: when configuring the router, always use the computer with which you were connected to the Internet prior to connecting the router . 1. Left in the column, click “Network". Now click “WAN”.
English version 16 If after 1 minute your IP address continues to show as 0.0.0.0, check your settings again and complete the following steps: 1. Switch off the router and the modem. 2. Disconnect the network cable between the router and the modem at the “WAN” port.
English version 17 Setting 4 PPTP 1. Left in the column, click “Network". Now click “WAN”. 2. Under “W AN Connection T ype” select “PPTP”. This setting is for providers who use a PPTP or KPN Mxstream connection. 3. Under “User Name” enter the user name you received from your provider.
English version 18 Setting 5 L2TP 1. Left in the column, click “Network". Now click “WAN”. 2. Under “W AN Connection T ype” select “L2TP”. This setting is for providers who use an L2TP connection. 3. Under “User Name” enter the user name you received from your provider.
English version 19 Setting 6 Static IP 1. Left in the column, click “Network". Now click “WAN”. 2. Under “W AN Connection T ype” select “Static IP”. This setting is for providers who use a fixed Static IP address. 3. Under “IP Address”, enter the IP address you received from your provider.
English version 20 Wireless settings and security We always recommend entering these settings with a computer connected to the Sweex Breedband Router by means of a cable. This is because you will lose the wireless connection with the Sweex Breedband Router while storing these settings.
English version 21 Complete the following steps for setting WEP security: 1. Tick “Enable Wireless Security” 2. Under “Security T ype” select “WEP”. 3. Under “Key T ype” select “64bit”. 4. Under “WEP Key”, enter the network key .
English version 22 Opening ports in the router (For warding and DMZ) The built-in firewall in this router cannot be disabled. However, ports can be opened for programmes and games which require this. We recommend using a fixed IP address for computers for which ports are opened.
English version 23 DMZ In some instances, or when a game console is used, you may opt to place a computer or game console entirely outside the firewall. This can be done in the so-called “demilitarized zone” (“DMZ”). This option can be found in the main screen of the port settings (“Port Forwarding”) under (“Advanced”.
English version 24 LAN settings The network settings of the router can be changed as follows. Left in the column, click “Network". Under “IP Address”, the IP address of the router (192.168.50.1) is stated. Changing the number here, changes the IP address of the router .
English version 25 Here the firmware of the router can be upgraded. New firmware can be downloaded from the Sweex website under ”Service en support”. If the firmware file is zipped, make sure you select and extract the file first on a location in your computer where you can retrieve it easily .
Een belangrijk punt na aankoop van elk apparaat Sweex LW050UK (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sweex LW050UK heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sweex LW050UK vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sweex LW050UK leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sweex LW050UK krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sweex LW050UK bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sweex LW050UK kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sweex LW050UK . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
