Gebruiksaanwijzing /service van het product 6309CCC van de fabrikant Sylvania
Ga naar pagina of 30
9-INCH COLOR TV/VCR 6309CCC O WNER’S MANU AL As an E NERGY S TAR Partner, our company has determined that this product meets the E NERGY S TAR guidelines for energy efficiency.
1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to.
- 3 - EN 9J27 13.Outdoor Antenna grounding- If an outside antenna or cable system is connected to the TV/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No.
AV OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE - 4 - EN 9J27 PRECAUTIONS LOCA TION For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat.
- 5 - EN 9J27 T ABLE OF CONTENTS A NOTE ABOUT RECYCLING This product’ s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
- 6 - EN 9J27 FEA TURES • I nfrared remote control • Bilingual on screen menu display selectab le in English or French • Real time counter– This shows the elapsed recording or playback time in hours, minutes, and seconds. The “–” indication will appear when the tape is rewound further than the tape counter position “0:00:00”.
- 7 - EN 9J27 VIDEO CASSETTE This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. REMOVING A CASSETTE 1)In the Stop mode, press the EJECT button on the remote control or press the STOP/EJECT button on the TV/VCR.
- 8 - EN 9J27 OPERA TING CONTROLS AND FUNCTIONS NOTE: • We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit.
- 9 - EN 9J27 - REAR VIEW - 26 ANT DC 13.2V AC 120V 27 28 9 F .FWD button– Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode.
- 10 - EN 9J27 PREP ARA TION FOR USE ANTENNA/CABLE CONNECTIONS DIPOLE ANTENNA HOOK UP 1. Push the stem of the Dipole Antenna (accessory) into the hole for antenna at the back of TV/VCR. 2. Connect the flat twin-lead cable from the Dipole Antenna to the 300/75 ohm Matching Adapter (accessory).
- 11 - EN 9J27 CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SA TELLITE BOX If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here. By using this connection you can also record scram- bled channels.
- 12 - EN 9J27 INST ALLING THE BA TTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow . 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.
- 13 - EN 9J27 SET UP FOR USE Y ou can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3).
- 14 - EN 9J27 CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “CHANNEL SET UP” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”. Then, press the F .
- 15 - EN 9J27 CLOCK SET UP (AUTO / MANUAL) Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow “AUTO CLOCK SET- TING”. If it is not, follow “MANUAL CLOCK SET- TING”.
- 16 - EN 9J27 MANUAL CLOCK SETTING Make sure ... • TV/VCR power must be turned on. In the example below , the clock is to be set to: DA TE May 7th, 2002 SETTING TIME 5:40PM 1 Select “SETTING CLOCK” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “SETTING CLOCK”.
- 17 - EN 9J27 ON SCREEN DISPLA Y To check the Counter , Clock and Channel number on the TV screen, press the DISPLA Y button on the remote control. Each time you press the DISPLA Y button on the remote control, the TV screen will change as fol- lows: • Counter mode: After 5 seconds, only the counter remains.
- 18 - EN 9J27 TV OPERA TION WA TCHING A TV PROGRAM 1 T urn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control.
- 19 - EN 9J27 PLA YBACK NORMAL PLA YBACK Make sure ... • TV/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/VCR will start playback automatically . 2 To begin playback Press the PLA Y button.
- 20 - EN 9J27 SPECIAL PLA YBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “USER’S SET UP” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “USER’S SET UP”.
- 21 - EN 9J27 SEARCH Make sure ... • TV/VCR power must be turned on. • Insert a tape. This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape.
- 22 - EN 9J27 RECORDING Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONL Y record and view the same channel.
- 23 - EN 9J27 This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR. Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.
- 24 - EN 9J27 TIMER Y ou may set the TV/VCR to start and end a record- ing while you are away . Y ou can set 8 programs to record on specific days, daily or weekly within a 1 year period. In the example below , the timer is being set to recor d: DA TE: July 5th, 2002 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 T APE SPEED: SP Make sure .
- 25 - EN 9J27 To shift the time schedule of an automatic timer recording. 1)Press the POWER button. 2)Repeat step [1] on page 24. 3)Press the RECORD button and select the desired program using the PLA Y/ K or STOP/ L button. 4)Press the RECORD button again.
- 26 - EN 9J27 TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the REC indicator goes off. 2)Press the MENU button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the F .FWD/ B button. The details of pro- grams appear on the TV screen.
- 27 - EN 9J27 3 Set wake up time Press the PLA Y/ K or STOP/ L but- ton until to point to “TIME”. Press the F .FWD/ B or REW/ s button until your desired wake up time appears. Each additional push will increase (or decrease) the time by 10 minutes.
- 28 - EN 9J27 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below . Check the corresponding CORRECTIVE ACTION column to remedy the problem.
GENERAL SPECIFICA TIONS CR T : 9 inch in-line gun, 90˚ deflection tube T elevision system : NTSC-M V ideo Heads : Rotary two-head T ape width : 1/2 inch T ape speed SP : 33.
Printed in Malaysia 0EMN01906 T4305CF * * * * * SYLVANIA HOME ENTERTAINMENT WARRANTY We appreciate your purchase of a SYLVANIA Home Entertainment product. We take pride in the quality of our products and have manufactured your new Home Entertainment unit to exacting quality standards.
Een belangrijk punt na aankoop van elk apparaat Sylvania 6309CCC (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sylvania 6309CCC heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sylvania 6309CCC vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sylvania 6309CCC leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sylvania 6309CCC krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sylvania 6309CCC bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sylvania 6309CCC kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sylvania 6309CCC . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
