Gebruiksaanwijzing /service van het product XO-AP XO-1 van de fabrikant Telex
Ga naar pagina of 19
XO-AP XO-1 Wireless Intercom System Telex ® Operating Manual Wireless Intercom System Telex Communicat ions, Inc..
Table of Contents Section 1 Introduction 1-1 General Description .............................................................................................................1-1 System Features .........................................................
General Descript ion The Telex Legacy ä Series is a full duple x (simultaneou s talk and listen), m ulti-channel, wirele ss intercom system. Legacy of fers a complete solution for 2 to 7 coaches per sideline, fast and easy set-up, durable beltpacks, 64 bit audio encrypt ion, and professional grade headsets.
1. On/Off Switch – Turns the powe r on/off to the ba se station. 2. Power / Low Batt ery Light – Indicates the ba se station has power , either fr om the int ernal battery or external power c onnected to the unit. Battery Indicat ion: • GREEN - Battery OK • RED - Battery Low (n eeds charged) 3.
1. On/Off & Volume Control – Turns the beltpac k power on/off and control s headset volume. 2. Battery Light – • GREEN - Battery OK • RED - Battery Low (n eeds charged) 3. "O" Channel Button and Light – Selects the “Offense” i ntercom channel.
Section 4 - Specifications RF Technology ............................................................................................................IEEE 802.11 ( Wi Fi) Frequency Band of Operation .....................................................
Set-up Prior to use, the XO-1 beltpacks and the XO-AP base station need to have their batter y packs fully charged. Refer to the charging instructions of this sect ion for instructions on charging. 1. Place the XO-AP base station in the area of use. 2.
2. You can now scan for another channel, manually select a channel or lock the current channel by using one of the following procedures: • Clear Scan – Hold the <SELECT> button until the decimal point sta rts to blink (about 3 seconds) then release.
° Release the “O” or “X” button, and the <TALK> button when at the desired level. • The higher the microphone gain the louder that beltpack user’s voice will sound to ot her users and themselves. Halftime 1. During halftim e leave the XO-AP base station “On”.
Li-Ion Batteries The Li-Ion batteries used in the XO-1 and XO-AP are excellent batteries for portab le, outdoor app lications. They have a high energy density (energy per weight ) compare to other rechargeable battery tec hnologies ( NiCd , NiMH, Alkaline, G el Cells), are low maintenance, and offer superior perfo rmance at low temperatures.
Encryption Code The Legacy system uses a 64 bit DES (Digital Encryption Standard) encryption algori thm to encrypt all audio in the system. The beltpacks in the system have a “key” in the software that the algorithm uses as the basis for the encryption.
9. Press and hold down the “X” button on the beltpack. Keep holding the “X” button and turn-on the beltpack. Hold the beltpack button down until the green LED next to the “X” button lights up (about 20 seconds), then release button ( Places the beltpack in programming mode).
Please rerea d the operat ion and encry ption secti on of this m anual to make s ure you have c omplet ed syste m set -up properly. The following contai ns troubl eshooting tips t hat m ay be helpf ul in solving the problem .
Section 7 - Trouble shooting continued Problem Possible Cause Solution When the XO-1 beltpack powe r was turned on, the unit 's power l ight cam e up, but the "O" butt on light neve r cam e up and comm unicati on never star ted. • Internal battery is nearly exhaused.
802.11 RF Channels The Legacy system has the ability to operate on any one of eleven RF channels. Although there are several different frequency channel settings, there is overlap between the channels. There are three non-overlapping channels available in t he FCC regulatory domain.
Regulatory Infor mation The XO-1 and XO-AP comply with Part 15 of FCC rules and Canada RSS-210 . Operation is subject to the following conditions: 1. This device may not cause harm ful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Section 10 - Accessories and Replacement Items Model Number Part Number Description LP-XO1 301950002 XO-1 Beltpack and Batter y Charger. NOTE: User must provide XO-AP serial num ber and IP address of all XO-1/XO-APs in system with order. PH-1 64438100LG Single si ded w/flexibl e dynam ic boom m ic, 150 ohm earphone, 6" (1.
Model Number Part Number Description ANT-FP 302054001 Dual Diversity, Flat Patch Antenna with Dua l Coax, 11dB i ANT-FPM 302054000 Metal Tilt and Sw ivel Antenna Mounting bracket for ANT-FP Antenna. Use for perm anent mount of ANT -FP Flat Panel Antenna.
8601 East Cornhusker Highway, Lincoln, NE 68507 Made in U.S.A. PN 804233-TX.
Een belangrijk punt na aankoop van elk apparaat Telex XO-AP XO-1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Telex XO-AP XO-1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Telex XO-AP XO-1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Telex XO-AP XO-1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Telex XO-AP XO-1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Telex XO-AP XO-1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Telex XO-AP XO-1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Telex XO-AP XO-1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
