Gebruiksaanwijzing /service van het product N301 van de fabrikant Tenda
Ga naar pagina of 81
1 1N Broadband Wireless Router.
1 1N Broadband Wireless Router Copyright S tatement is the registered trademark of Shenzhen T enda T echnology Co., Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders.
1 1N Broadband Wireless Router Contents COPYRIGHT ST A TEME NT ....................................................................................................... 1 CHAPTER 1 PRODUCT OVER VIEW ......................................................
1 1N Broadband Wireless Router 6.2 Restore to Factor y Default S ettings .................................................................................................... 58 6.3 Backup/Restore .......................................................
1 1N Broadband Wireless Router . 1 Chapter 1 Pr oduct Overview 1 Package Contents Unpack the box and verify that the package contains the following: ⑴ W ireless Broadband Router ⑵ Power Adapter ⑶ Quick Install Guide If any of the above items is incorrect, missing, or damaged, please contact your T enda reseller for immediate replacement.
1 1N Broadband Wireless Router . 2 ◈ Back Panel Back LED Overview: Port Function Description W AN Usually for connecting DSL MODEM CABLE MODEM ISP to the Internet.
1 1N Broadband Wireless Router . 3 Chapter 2 Installation and Quick Setup Guide 1 Physical Installation 1.1 Preparation Before connecting network lines, please verify the following items: Item Description W ireless Router Used with the provided power supply PC Installed with IE8 or other better web browsers.
1 1N Broadband Wireless Router . 4 1.2 Physical installation 1. Connect one end of the included power adapter to the device and plug the other end into a wall outlet nearby .(Using a power adapter with a dif ferent voltage rating than the one included with the device will cause damage to the device) 2.
1 1N Broadband Wireless Router . 5 2 Internet Connection Setup 2.1 Log in to W eb Manager 1. Launch a web browser , such as IE W eb browser; 2. In the address bar , input 192.168.0.1 and press Enter ; 3. Enter admin in the password field on the appearing login window and then click OK .
1 1N Broadband Wireless Router . 6 5. If you fail to log in to it, please refer to Appendix 3 F AQs..
1 1N Broadband Wireless Router . 7 2.2 Internet Connection Setup Common Interne t connection types are available on the home page: PPPoE and DHCP . DHCP Select DHCP (Dynamic IP) if you can access Int .
1 1N Broadband Wireless Router . 8 Note: 1. DHCP is th e default Internet connection type; 2. If y ou are not sure about your PPPoE username and password, contact y our Internet service provider (ISP) for help. For other Internet connection types, please go to section 1.
1 1N Broadband Wireless Router . 9 3 V erify Internet Connection Settings System automatically skips to the status page when you finish all needed settings on the home page. Here you can see the system status and W AN connection status of the device. 1.
1 1N Broadband Wireless Router . 10 1). Contact your ISP for assistance if you are using the DHCP connection type. 2). Read the connection diagnostic info on W AN status. Note: Below diagnostic info will be displayed on particular occasions for your reference: 1).
1 1N Broadband Wireless Router . 11 4 Connect to Device W irelessly Having finished above settings, you can search the device's wireless network (SSID) from your wireless devices (notebook, iPad, iPhone, etc) and enter a security key to connect to it wirelessly .
1 1N Broadband Wireless Router . 12 3) Click Network and Sharing Center . 4) Click Change adapter settings ..
1 1N Broadband Wireless Router . 13 5) Select a desired wireless connection and click Connect/Disconnect . 6) Sele ct the wireless network you wish to connect and click Connect .
1 1N Broadband Wireless Router . 14 7) Enter the sec urity key and click OK . 8) Y ou can access Internet via the d evice when " Connected " appears next to the wireless network name you selected.
1 1N Broadband Wireless Router . 15 Windows XP Operation 2. If you are using W indows XP OS, do as follows: 1) Click S tart and select Control Panel . 2) Click Network Connections .
1 1N Broadband Wireless Router . 16 3) Right click Wir el ess Network Connection and then select View A vailable Wi reless Networks . 4) Select the desired wireless network, click Connect, enter the security key and then cl ick OK.
1 1N Broadband Wireless Router . 17 5) Y ou can access Internet via the device when " Connected " appears next to the wireless network name you selected.
1 1N Broadband Wireless Router . 18 Chapter 3 Advanced Settings 1 Advanced 1 .1 S tatus Here you can see at a glance the operating status of the device.
1 1N Broadband Wireless Router . 19 S tatic IP Select Static IP if your ISP provides all the needed info. Y ou will need to enter the provided IP address, subnet mask, gateway address, and DNS address(es) in corresponding fields. 1 . Click Advanced . 2.
1 1N Broadband Wireless Router . 20 4 . IP Address: Enter the IP address provided by your ISP . Consult your ISP if you are not clear .Consult your ISP if y ou are not clear . 5 . Subnet mask: Enter the subnet mask provided by your ISP . 6 . Gateway: Enter the W AN Gateway provided by your ISP .
1 1N Broadband Wireless Router . 21 1. Internet connection T ype: Displays the current Internet connection type. 2. PPTP Server Addr ess: Enter the IP address of a PPTP serve r . 3. User Name: Enter your PPTP User Name. 4. Password: Enter the password.
1 1N Broadband Wireless Router . 22 a) Internet connection T ype: Displays the current Internet connection type. b) L2TP Server Address : Enter the IP address of a L2TP serve r . c) User Name : Enter your L2TP username. d) Password: Enter the password.
1 1N Broadband Wireless Router . 23 PPPoE Dual Access PPPoE dual access only supported in special Area e.g.Russia. 1. Internet connection T ype: Displays the current Internet connection type. 2. PPPoE User Name: Enter the User Name provided by your ISP .
1 1N Broadband Wireless Router . 24 1.3 MAC Clone Some Internet service providers (ISPs) require end- user ’ s MAC address to access their network. This featu re copies the MAC address of your network device to the router . 1. MAC Address: Configure device’ s W AN MAC address.
1 1N Broadband Wireless Router . 25 1. LAN MAC Address: Displays device's LAN MAC address, whi ch is NOT changeable. 2. IP Address: Device's LAN IP address. The default is 192.168.0.1. Y ou can change it according to your need. 3. Subnet Mask: Device’ s LAN subnet mask, 255.
1 1N Broadband Wireless Router . 26 4. OK: Click to save your settings. Note: 1. W eb pages are not able to open if DNS server addresses are entered incorrectly . 2. Do remember to reboot the device to activate new settings when you finish all settings.
1 1N Broadband Wireless Router . 27 1. IP Address: Enter the IP address for static DHCP reservation. 2. MAC Address: Enter the MAC address of a computer to always receive the same IP address (the IP you just specified). 3. Add: Click to add the entry to the MAC address reservation list.
1 1N Broadband Wireless Router . 28 2 W ireless Settings 2.1 W ireless Basic Settings If you want to create a WLAN for sharing Internet connection, si mply click Wir el ess-> W ireless Basic Settings . Change the SSID, you can name it whatever you like.
1 1N Broadband Wireless Router . 29 accesses and malicious packet sniffing. T o encrypt your wireless network, do as follows: 1. Select the wireless network (SSID) you wish to encrypt. 2. Disable WPS. (WPS is enabled on the router by default. If you want to use other security modes, you must first disable the WPS .
1 1N Broadband Wireless Router . 30 WPS/PBC on the client device within 2 minutes; PIN: On the wireless security page, enable WPS , select PIN and enter the 8-digit PIN code from network adapter; then, within 2 minutes, enable WPS/PIN on the client device; Note 1.
1 1N Broadband Wireless Router . 31 adapter; if the adapter successfully joins the wireless network, the WPS LED will display a solid light. Repeat steps above if you want to add more wireless adapters to the router . 2. Reset OOB: Clicking this button will reset SSID to factory default and disable security mode.
1 1N Broadband Wireless Router . 32 2. Click Open Scan , select the AP you wish to con nect, such as T enda-000248, and click OK . 3. V iew and note down the wireless security settings: security mode, cipher type, security key .
1 1N Broadband Wireless Router . 33 4. Click Close Scan and OK. 5. Save the settings and the router will reboot automatically . 6. Internet Connection Setup: Click Advanced > Internet Connection Setup , select Internet Connection Setup, such as DHCP , and click OK .
1 1N Broadband Wireless Router . 34 7. Click Advanced > S tatus and the connection status displays Connected . Note 1. When the settings finished, remember to enter Internet Connection Setup to set up Internet connection. 2. V erify that the SSID, channel, and security mode on the page match those of the added wireless network.
1 1N Broadband Wireless Router . 35 extender mode and click Open Scan . 2. Click Open Scan , select the AP you wish to con nect, such as T enda -15058C, and click OK . 3. V iew and note down the wireless security settings: security mode, cipher type, security key , etc.
1 1N Broadband Wireless Router . 36 5. Save the settings and the router will restart automatically . WDS Bridge Mode W ireless distribution system ( WDS) is a system enabling the wireless interconnection of access points in an IEEE 802.
1 1N Broadband Wireless Router . 37 For example: As seen in the figure above, PC1 and PC2 access Internet via a wireless connection to Router 1. While PC3 and PC4 are too far to directly connect to Router 1 for Internet access. Now y ou can use the WDS bridge feature to let PC3 and PC4 access Internet.
1 1N Broadband Wireless Router . 38 3. Click W ireless>W ireless Security to check router one’ s wireles s sec urity settings. 4. V erify that DHCP server is enabled on Router 1: Click Advanced > DHCP Server .
1 1N Broadband Wireless Router . 39 5.Set the LAN IP address of Router 2 to a different address yet on the same net segment as Router 1. As shown below: Router 1: LAN IP: 192.168.0.1; Subnet Mask: 255.255.255.0; Router 2: LAN IP ： 192.168.0.10; Subnet Mask: 255.
1 1N Broadband Wireless Router . 40 3) Select the wireless network to connect and click OK . 4) V erify that the SSID, channel, and AP MAC address on the page match those of the added wireless network. If not, manually correct them. 5) Close Scan and click OK to save your settings.
1 1N Broadband Wireless Router . 41 2. Configure Router 1: 1. Go to wireless section on Router 1 and specify WDS ( or WDS Bridge) as its wireless working mode. 2. Manually enter Router 2's MAC address (Also, you can use the Scan opti on as mentioned above) and click OK to finish your settings.
1 1N Broadband Wireless Router . 42 3. T o permit a wireless device to connect to your wireless network, select Permit, enter its MAC address, click Add and then OK. Then only this device li sted as “Permitted” will be able to connect to your wireless network; all other wireless devices will forbidden.
1 1N Broadband Wireless Router . 43 Note: The bandwidth here refers to the channel bandwidth instead of wireless connection rate..
1 1N Broadband Wireless Router . 44 3 Bandwidth Control 3.1 Bandwidth Control Use this section to manage bandwidth allocation to devices on your LAN. If there are multiple PCs behind your router compe.
1 1N Broadband Wireless Router . 45 7. OK: Click to activate your settings. For example: If y ou are sharing a 4M broadband connection with a neighbor , who always exhausts the bandwidth resource downloading data, this feature will help. Simply specify half of the 4M bandwidth for your neighbor's PC (say , 192.
1 1N Broadband Wireless Router . 46 Sent Message: Displays the number of packets sent by a corresponding PC via the device since S tatistics is enabled. Sent Bytes: Displays the number of Bytes sent by a corresponding PC via the device since Statistics is enabled .
1 1N Broadband Wireless Router . 47 4 Special Applications 4.1 Port Range Forwarding Port range forwarding is useful for web servers, ftp servers, e-mail servers, gaming and other specialized Internet applications.
1 1N Broadband Wireless Router . 48 2. LAN IP: Specify t he internal host’ s IP address. Be sure to statically assign the host’ s IP address to make this function constant. 3. Protocol: Specify the protocol required for the se rvice utilizing the port(s).
1 1N Broadband Wireless Router . 49 Note: If you include port 80 on this section, you must set the port for remote (web-based) management to a dif ferent number than 80, such as 8080, otherwise the virtual server feature may not take ef fect.
1 1N Broadband Wireless Router . 50 communicated to the DDNS provide r by software running on a computer or network device at that address; the provider distributes the association between the host name and the address to the Internet's DNS servers so that they may resolve DNS queries.
1 1N Broadband Wireless Router . 51 application on the LAN. This feature is enabled by default. No settings are required. Enable UPnP: Check/uncheck to enable/disable the UPnP feature. OK: Click to complete your settings. 4.5 S tatic Routing When there are several routers in the network, you may want to set up static routing.
1 1N Broadband Wireless Router . 52 3. Gateway : Specif the IP address for next hop. 4. OK: Click to activate your settings. Note: 1. Gateway must be on the same IP net segment as device's LAN/W AN IP address. 2. Subnet Mask must be entered 255.255.
1 1N Broadband Wireless Router . 53 5 Security 5.1 URL Filter T o better control LAN PCs, you can use the URL filter functionality to allow or disallow such PCs to access certain websites within a specified time range. 1. Filter Mode: Select a proper filter m ode, say , Forbid Only .
1 1N Broadband Wireless Router . 54 1. Filter Mode: Select Forbid Only . 2 . Access Policy: Select an access policy number , say , 1, from the drop-down list. 3. Policy Name: Briefly describe the current rule, say , baidu, (It can only consist of numbers, letters, or underscore).
1 1N Broadband Wireless Router . 55 3. Policy Name: Briefly describe the current rule (It can only consist of numbers, letters, or underscore). 4. MAC Address: Specify a MAC address for a cor responding MAC filter rule to apply to. 5. T ime: Specify a time period for a current rule to take effect.
1 1N Broadband Wireless Router . 56 5.3 Client Filter This section allows you to set the times spec ific clients can or cannot access the Internet via the devices’ assigned IP addresses and service port.
1 1N Broadband Wireless Router . 57 192.168.0.100 -- 192.168.0.120 from accessing Internet, do as follows: 1. Filter Mode: Select Forbid Only . 2. Access Policy: Select an access policy number , say , 1, from the drop-down list. 3. Policy Name: Briefly describe the current rule, say , 123.
1 1N Broadband Wireless Router . 58 6 T ools 6.1 Reboot Reboot the device to activate your settings. W AN connection will be disconnected during reboot. 6.2 Restore to Factory Default Sett ings Click the Restore to Factory Default button to re set device to fa ctory default settings.
1 1N Broadband Wireless Router . 59 be imported to your device in case that the device is re stored to factory default settings. T o do so, follow below instructions: 1.Click the Backup button and specify a directory to save settings on your local hardware.
1 1N Broadband Wireless Router . 60 Click the Restore button to reset your device to pr evious settings. 6.4 Syslog Here you can view the history of th e device’ s actions.
1 1N Broadband Wireless Router . 61 remotely from the Internet via a web browser . 1. Enable: Check/uncheck to enable/disable the DMZ host feature. 2. Port: This is the management port to be open to outside access. The default setting is 8080. Do NOT change it unless instructed b y your ISP .
1 1N Broadband Wireless Router . 62 Note: Configured time and date info will be lost when the device gets disconnected from power supply . However , it will be updated automatically when the device reconnects to Internet. T o activate time-based features (e.
1 1N Broadband Wireless Router . 63 6.8 Firmware Upgrade Firmware upgrade is released periodically to improve the functionality of your device and also to add new features. If you run into a problem with a specific feature of the device, log on to our website (www .
1 1N Broadband Wireless Router . 64 Appendix 1 Glossary Channel A communication channel, al so known as channel, refers either to a physical transmission medium such as a wire or to a logical connection over a multiplexed medium such as a radio channel.
1 1N Broadband Wireless Router . 65 protocols. It provides an authentication mechanism to devices wishing to attach to a LAN or WLAN.IEEE 802.1X defines the encapsulation of EAP over LAN or EAPOL. 802.1X authentication involves three parties: a supplicant, an authenticator , and an authentication server .
1 1N Broadband Wireless Router . 66 computer hostnames into IP addresses. WDS A wireless distribution system (WDS) is a system enabling the wireless interconnection of access points in an IEEE 802.
1 1N Broadband Wireless Router . 67 Appendix 2 V erify the WDS Connection Configure PC2: Click S tart > Run on PC3, input cmd on the appearing window and then click OK.
1 1N Broadband Wireless Router . 68 Configure PC3 and PC4 ： 1. Set PC3 and PC4 to Obtain an IP addr ess automatically ..
1 1N Broadband Wireless Router . 69 2. When the two PCs get IP addresses, try below steps to verify the WDS connection: Click S tart - > Run on PC3, input cmd on the appearing window and then click OK. Input ping 192.168.0.1 and press Enter . If you get a screen as seen below , you have successfully implemented W DS.
1 1N Broadband Wireless Router . 70 Note: 1. WDS feature can onl y be implemented between 2 WDS-capable wireless devices. Plus, SSID, channel, security settings and security key must be exactly the same on both such devices.
1 1N Broadband Wireless Router . 71 Appendix 3 F AQs This section provides solutions to problems that may occur during installation and operation of the device. Read the following if you are running into problems. If your problem is not covered here, please feel free to go to www .
1 1N Broadband Wireless Router . 72 Internet connection type. Y ou need to change the MTU size (1492 by default). In this case, go to “W AN Settings” to change the MTU value from default 1480 to 1450 or 1400, etc.
1 1N Broadband Wireless Router . 73 Appendix 4 Remove W ireless Network from Y our PC If you change wireless settings on your wireless device, you must remove them accordingly your PC; otherwise, you may not be able to wirelessly connect to the device.
1 1N Broadband Wireless Router . 74 3.Click "W ireless Networks", select the item under "Preferred networks" and then click the Remove button. If you are using Windows 7, do as follows: 1.Click Network from your desktop and select Properties.
1 1N Broadband Wireless Router . 75 2.Select "Manage W ireless Networks". 3. Click the wireless connection and select "Remove network".
1 1N Broadband Wireless Router . 76 Appendix 5 Safety and Emissi on S tatement CE Mark W arning This is a Class B product In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
1 1N Broadband Wireless Router . 77 uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body . Note: 1. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Een belangrijk punt na aankoop van elk apparaat Tenda N301 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Tenda N301 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Tenda N301 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Tenda N301 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Tenda N301 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Tenda N301 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Tenda N301 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Tenda N301 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
